Hi,
I have bought Edimentional E-D glasses and now I try to decrease the
resolution in F12002, F1C and Nascar2002 to make them work. Although I
set the resolution to the lowest possible in these games it seems like
the graphic-card crank up the resolution when I start the games.
So, my problem is that I'm not able to set the resolution that I need
to get my glasses working. I need to somehow force the
graphic-card/games to use this resolution.
Any suggestions.
Try Rage3D Tweak.
"Jorn" <[email hidden]> wrote in message
news:[email hidden]...
Quoted text (11 lines)
> Hi, > > I have bought Edimentional E-D glasses and now I try to decrease the > resolution in F12002, F1C and Nascar2002 to make them work. Although I > set the resolution to the lowest possible in these games it seems like > the graphic-card crank up the resolution when I start the games. > So, my problem is that I'm not able to set the resolution that I need > to get my glasses working. I need to somehow force the > graphic-card/games to use this resolution. > > Any suggestions.On 28 Nov 2003 04:39:03 -0800, [email hidden] (Jorn) wrote:
You sure that's the problem? If you set a game to run at 800x600 then
it will run at that res. I'm thinking that you are not setting the
refresh rate high enough. For good viewing and frame rates on 3D
glasses you should set the refresh rate to 120hz and 800x600 res.
My glasses wouldn't work if I didn't have the refresh rate set to at
least 100hz. If you are using WinXP you will proabably need to force
the higher refresh rate by using some thing like Multires
(www.entechtaiwan.com). Make sure your monitor can do 120hz refresh
rate (vertical sync) at 800x600 too.
