Race Sim Central
Rec.Autos.Simulators Archive

Cleaning My Thrustmaster

5 posts by 4 people · 08 Jul 1999 - 10 Jul 1999

Bob 08 Jul 1999#478548
after about 6 months, i have a sticking brake pedal, and at certian times the car cuts sharp right. i was going to open it up and clean it out, but before i did so, wanted to run it by the group. any issues or pitfalls to doing this? any suggested methods? thanx in advance.
Jason Monds 08 Jul 1999#478549
> after about 6 months, i have a sticking brake pedal, and at certian times > the car cuts sharp right. > i was going to open it up and clean it out, but before i did so, wanted to > run it by the group. > any issues or pitfalls to doing this? > any suggested methods? Use Radio Shack Contact and Head cleaner for the steer pot. Just spray some in the hole and move the steering wheel from lock to lock. You might need to repeat. As for the sticking brake pedal, I can't help you there. -------- Jason Monds "My other car is a Ferrari" http://members.home.net/gpl.mondsj/gpl - For my combined gas/brake setups (Please remove 'no extra spork' when replying)
David.Da.. 09 Jul 1999#478763
My GP1 had a problem with the gas, so I cleaned it with Radio Shack TV Tuner Clearer. Same with the wheel pots. On Thu, 08 Jul 1999 13:19:11 -0600, Jason Monds
Quoted text (18 lines)>> after about 6 months, i have a sticking brake pedal, and at certian times >> the car cuts sharp right. >> i was going to open it up and clean it out, but before i did so, wanted to >> run it by the group. >> any issues or pitfalls to doing this? >> any suggested methods? >Use Radio Shack Contact and Head cleaner for the steer pot. Just spray some >in the hole and move the steering wheel from lock to lock. You might need to >repeat. As for the sticking brake pedal, I can't help you there. >> thanx in advance. >-------- >Jason Monds >"My other car is a Ferrari" >http://members.home.net/gpl.mondsj/gpl - For my combined gas/brake setups >(Please remove 'no extra spork' when replying)
% after about 6 months, i have a sticking brake pedal, and at certian times % the car cuts sharp right. % i was going to open it up and clean it out, but before i did so, wanted to % run it by the group. % any issues or pitfalls to doing this? % any suggested methods? The only problem that may occur with cleaning your pots with the contact cleaner, is that over time this may gunk up the works. If after repeated cleanings, nothing seems to help, it's time to take the pot apart and wipe the insides dry and re-assemble. It's a fairly easy job and shouldn't take more than a 1-/2 hour. The sticking brake pedal could be caused by a busted spring (some TM units have 2 springs per pedal). Or it may have become loosened and needs have the assembly retightened. Or you may be referring to how the pot is being read, in which case a good cleaning should help. To clean the pots on Thrustmaster products, get some Tuner/Switch Cleaner and Lubricant from an electronics supply store. Open up the housing on the unit and spray the insides of the pot (short for potentiometer). I usually direct the spray (via the tube extenstion for the spray nozzle) into the openings of the pot where the solder lugs are. Then move the wheel or pedal through its full range 4-6 times to work the cleaner over all the contacts. If the unit was acting up quite a bit, you may want to give it a second "cleaning" before sealing up the unit and heading back out to the track. There are pots for each pedal and for each lever on the back of the GP1 wheel. The latter can usually be cleaned by finding a "squarish" hole on the pot and directing the spray through the hole. You should be able to clean the pots for the levers without disassembling anything on your GP1, however to get to the steering wheel pot you will need to remove the housing cover of the wheel. [For the non-electronics or non-mechanical racers out there, the pot is the "silver" cylinder that the is directly behind the wheel inside the housing. It should have some wires connected to it and the wheel is connected its plastic shaft. There should be a "shaft" coming out of one end of the cylinder.] -- **************************** Michael E. Carver ************************* Upside out, or inside down...False alarm the only game in town. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy