Race Sim Central
Rec.Autos.Simulators Archive

GPL on a Pentium Pro

9 posts by 5 people · 06 May 1999 - 10 May 1999

Paul Jone 06 May 1999#465823
I've been trying to get all the old machines in my house GPL "fit" and have acheived remarkable results with a Pentium Pro 200MHz. This is, of course, a far superior beast to the regular Pentium 200 MHz MMX or the Pentium Overdrive 200 MHz, because of the very fast cache, which runs at the same speed as the CPU (the same as a Pentium II 400 MHz's cache). Well, I can only conclude that the cache is used extensively in GPL because, with a single 12MB Voodoo2 card in the old Pro, it delivers 36fps in 1024x768 everywhere but at the start and in incidents provided you select the arcade view. The***pit view requires a bit of tweaking and reduction in graphics detail, but not marked and no reduction in resolution is necessary. In fact it's really not that far short of a Pentium II 400 MHz that also has a single 12MB Voodoo2 - at a guess I say it performs around the speed of a Pentium II 333 MHz. I also tried to get a Pentium Overdrive 200 MHz with an old fashioned Voodoo1 card to run GPL. It's a major task to get 36fps with this one. Basically you have to go for arcade view and turn amost everything off - and that's in 520 resolution. It looks horrible but I guess is just about driveable - in fact it's a bit like old DOS racing games (GP2, Nascar 1, SODA etc). In conclusion, don't turn out that old Pentuim Pro just yet. Instead buy a Voodoo2 for it. Cheers, Paul
G'day :) I also have a Pentium Pro box (a GW2k G6-200) which I have set to run at 233MHz (66 x 3.5). This box also has a 12MB Voodoo II card in it. I only race in***pit mode with cars only in the mirrors, all mirror textures off, detail at ~40-50%, skidmarks off, everything else on. I use the 800x600 resolution (85Hz refresh, sync to refresh off, Voodoo II card clocked at 96MHz) and find that with the glide2 wrapper which allows you to reduce the number of mirrors updates (I use refresh every 3 frames) I can get 30-36fps while racing when all is quiet and I'm only close to one or two cars. When I'm in a larger pack this can drop into the high or even low 20s though. While sitting at the rear of a full AI grid at Kyalami at the start it will even dip to about 12fps. I have a friend with a 300MHz Pentium II. His setup is different in other ways but it seems to me that his machine handles a large field of AI cars better. That task seems to be governed by CPU grunt alone. I can get better framerates that he can when hotlapping (he has a Matrox G200 using the Matrox beta patch for GPL) but I can never match his framerate numbers when sitting in a grid. By the end of the straight at Kyalami though we are roughly even with framerates of around 20 or just over. So in short I wouldn't go as far as to match my machine against fast Pentium II/III or Celeron based machines but much fun can still be had with setup. It is certainly quicker than my Pentium 233MMX (running at 3.5x75~=263MHz) with a Voodoo I card (running at 57MHz) with the rest of the settings as above. Now a question :) I can avoid the cosmetic menu screen bugs by putting the glide 2.53 DLL in my GPL directory. But can I have the latest reference drivers for the Voodoo II, use the glide wrapper program and still get the 2.53 DLL in at the same time? At present I can't think of a way so I've stuck with the latest refence drivers and the glide wrapper program since the cosmetic problems with the menu screen don't worry me and I like the increased framerate (reducing the mirror updates seems to be worth something like 2-3fps in general use). Have fun and happy driving :) - ricky
P Gagg 08 May 1999#466249
Quoted text (22 lines)> I've been trying to get all the old machines in my house GPL "fit" and > have acheived remarkable results with a Pentium Pro 200MHz. This is, of > course, a far superior beast to the regular Pentium 200 MHz MMX or the > Pentium Overdrive 200 MHz, because of the very fast cache, which runs at > the same speed as the CPU (the same as a Pentium II 400 MHz's cache). > Well, I can only conclude that the cache is used extensively in GPL > because, with a single 12MB Voodoo2 card in the old Pro, it delivers > 36fps in 1024x768 everywhere but at the start and in incidents provided > you select the arcade view. The***pit view requires a bit of tweaking > and reduction in graphics detail, but not marked and no reduction in > resolution is necessary. In fact it's really not that far short of a > Pentium II 400 MHz that also has a single 12MB Voodoo2 - at a guess I > say it performs around the speed of a Pentium II 333 MHz. I also tried > to get a Pentium Overdrive 200 MHz with an old fashioned Voodoo1 card to > run GPL. It's a major task to get 36fps with this one. Basically you > have to go for arcade view and turn amost everything off - and that's in > 520 resolution. It looks horrible but I guess is just about driveable - > in fact it's a bit like old DOS racing games (GP2, Nascar 1, SODA etc). > In conclusion, don't turn out that old Pentuim Pro just yet. Instead buy > a Voodoo2 for it. > Cheers, > Paul
Hey, Paul, have you tried running the Ppro at 225 instead of 200? (using 3 x 75 busspeed) as that should speed up everything, not just your cpu!!! 8-) *Peter* 8-)
Paul Jone 08 May 1999#466250
I'm always frightened of overclocking. Can I burn up my CPU or is it safe? Cheers, Paul
Quoted text (29 lines)> > I've been trying to get all the old machines in my house GPL "fit" and > > have acheived remarkable results with a Pentium Pro 200MHz. This is, of > > course, a far superior beast to the regular Pentium 200 MHz MMX or the > > Pentium Overdrive 200 MHz, because of the very fast cache, which runs at > > the same speed as the CPU (the same as a Pentium II 400 MHz's cache). > > Well, I can only conclude that the cache is used extensively in GPL > > because, with a single 12MB Voodoo2 card in the old Pro, it delivers > > 36fps in 1024x768 everywhere but at the start and in incidents provided > > you select the arcade view. The***pit view requires a bit of tweaking > > and reduction in graphics detail, but not marked and no reduction in > > resolution is necessary. In fact it's really not that far short of a > > Pentium II 400 MHz that also has a single 12MB Voodoo2 - at a guess I > > say it performs around the speed of a Pentium II 333 MHz. I also tried > > to get a Pentium Overdrive 200 MHz with an old fashioned Voodoo1 card to > > run GPL. It's a major task to get 36fps with this one. Basically you > > have to go for arcade view and turn amost everything off - and that's in > > 520 resolution. It looks horrible but I guess is just about driveable - > > in fact it's a bit like old DOS racing games (GP2, Nascar 1, SODA etc). > > In conclusion, don't turn out that old Pentuim Pro just yet. Instead buy > > a Voodoo2 for it. > > Cheers, > > Paul > Hey, Paul, have you tried running the Ppro at 225 instead of 200? (using 3 > x 75 busspeed) as that should speed up everything, not just your cpu!!! > 8-) > *Peter* 8-)
I have to disagree about the PPRO for GPL. I ran on a PPRO with 128 mb ram and a V2 12 mb CL card. I would estimate it's speed to that of a hyphotethical PII 200, not a PII333. the PPRO . (Measured at the back of the grid at Monaco with 19 AI opponents). K.S. Br?nnick
P Gagg 09 May 1999#466427
> I'm always frightened of overclocking. Can I burn up my CPU or is it > safe? Burning up your cpu is highly unlikely? (You should of course take the usual static electricity precautions whenever you are working on pc internal components though! EG: grounding yourself before touching anything). The worse that may usually happen is that the pc will just not work. If this happens you merely reset the pc to its previous settings, and it will then work again as normal. Sometimes when overclocking, the pc will not boot, or it will only boot until a certain point then stop, or it may boot but you get error messages, or programs will simply not run, or the pc will not be able to read the hard disk. In extreme cases you may have to reformat the harddisk and re-install your software, but this is pretty rare. Generally, if you overclock, then run the pc, and it starts ok, try using a few different programs straight away, say a win9x utility, a game or two, a word processor, etc. If they run ok, and you can use the pc for say an hour or so, then its usually ok and you shouldn't get any further problems. The main problem with overclocking is the excess heat from the cpu, provided you have good ventilation, maybe add an extra fan? then this should not be a problem. Like I say, if you get past say an hour or twos use with no problems, then this means the cpu is not getting too hot, and all should be ok. Just try one increase at a time and see how it goes, (if there is more than one possibly increase to make?) don't try and set it as fast as possible in one go or it will almost certainly not work. 8-) *Peter* 8-)
Jo 09 May 1999#466428
All you PPro users, just make sure to fix the problem with the data-transfer to the video adapter. improves framerate. Joachim > I have to disagree about the PPRO for GPL. > I ran on a PPRO with 128 mb ram and a V2 12 mb CL card. I would estimate > it's speed to that of a hyphotethical PII 200, not a PII333. as > the PPRO . (Measured at the back of the grid at Monaco with 19 AI > opponents). > K.S. Br?nnick
Paul Jone 10 May 1999#466634
So in your estimation the same speed cache is worth nothing? A PII has a cache at half CPU speed so a hypothetical PII 200MHz would have a cache at 100MHz - whereas the PPro 200MHz has a cache running at 200MHz. I believe that the PII core is essentially the PPro core, so I'm wondering where the hypothetical PII 200MHz is making up the ground. Anyway what ever you maintain I can tell you that it's faster. Cheers, Paul
Quoted text (11 lines)> I have to disagree about the PPRO for GPL. > I ran on a PPRO with 128 mb ram and a V2 12 mb CL card. I would estimate > it's speed to that of a hyphotethical PII 200, not a PII333. > the PPRO . (Measured at the back of the grid at Monaco with 19 AI > opponents). > K.S. Br?nnick
>So in your estimation the same speed cache is worth nothing? A PII has a cache >at half CPU speed so a hypothetical PII 200MHz would have a cache at 100MHz - >whereas the PPro 200MHz has a cache running at 200MHz. I believe that the PII >core is essentially the PPro core, so I'm wondering where the hypothetical PII >200MHz is making up the ground. Anyway what ever you maintain I can tell you >that it's faster. >Cheers, >Paul Well, you forget that the L1 cache is only 8kb+8kb for the PPRO vs 16+16 for the PII. Remember how much a difference this made for the P200MMX over the P200? Also, the FX chipset using EDO ram for the PPRO has slower RAM access than the new SDRAM chipsets for the PII. I don't think a PPRO200 is fast enough for GPL if racing online or against many AI opponents. Regards K.S. Br?nnick

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy