Am I missing something? I flip the switch over on the brake unit and change
the device in the control panel to Nascar Pro w/separate axis. Everything
seems fine during the calibration process, but when I'm done and Test it, my
accelerator axis is bouncing all over the place.
Any help or suggestions would be greatly appreciated.
Tim
During the wheel and gas pedal portion of the calibration, move the gas pedal
fully through its range, but hold it at mid travel with your foot when you
"click the button on your controller"
As long as you're holding the gas pedal partially down when you leave that
screen, the calibration will work fine.
Trips
> Am I missing something? I flip the switch over on the brake unit and change
> the device in the control panel to Nascar Pro w/separate axis. Everything
> seems fine during the calibration process, but when I'm done and Test it, my
> accelerator axis is bouncing all over the place.
> Any help or suggestions would be greatly appreciated.
> Tim
I've had that problem too. Here is a copy of the post that I found that
fixed it for me.
I hope this helps : )
"ZZ"
--
Official member IGPS (Internet Grand Prix Series)
And Sim Racing Mag Ferrari Challenge
-----------------
Busch Carpentry
"Plans?"
----------------
Busch Motorsports
"Remember racecar is racecar spelled backward"
Thanks for the help guys. Trips original advise worked great.
Tim
Glad I could help...
Trips
> Thanks for the help guys. Trips original advise worked great.
> Tim
