Hello all,
I would like to take this opportunity to thank Thrustmaster. On monday March
the 8, i ordered a set of Nascar Pro pedals springs (mine broke...), today i
received them with a note on how to install them...
Good work, i thought it would be nice to share my experience with you.
Now i can go back to practice GPL, hehe.
Regards,
Christian Giroux.
Thrustmaster has always been good at getting replacement parts out.
--
Don Burnette
Palmetto Racing
Dburn on Ten
> Thrustmaster has always been good at getting replacement parts out.
> Don Burnette
Yes they are very good at it, and they deserve all the good words. Too
easy to forget about good things around and only rave about the bad
things.
Keep up the good work TM!
JoHS
Bullshit!!!. Thrustmaster stinks. I ordered parts on Feb 19th, never got
them. Have spent two hours on the phone listening to music. Have sent 12
e-mails with no response. THRUSTMASTER STINKS!!!
Quoted text (25 lines)
>Thrustmaster has always been good at getting replacement parts out. >-- >Don Burnette >Palmetto Racing >Dburn on Ten >>Hello all, >>I would like to take this opportunity to thank Thrustmaster. On monday >March >>the 8, i ordered a set of Nascar Pro pedals springs (mine broke...), today >i >>received them with a note on how to install them... >>Good work, i thought it would be nice to share my experience with you. >>Now i can go back to practice GPL, hehe. >>Regards, >>Christian Giroux.I can only state my experience with TM for the 2 years I used my T2. I don't
have any motives, as I have a TSW now <g>. In every case when I emailed TM
for springs, pots, and tune up kit, I had the parts in 7-10 days.
--
Don Burnette
Palmetto Racing
Dburn on Ten
>Bullshit!!!. Thrustmaster stinks. I ordered parts on Feb 19th, never got
>them. Have spent two hours on the phone listening to music. Have sent 12
>e-mails with no response. THRUSTMASTER STINKS!!!
>>Thrustmaster has always been good at getting replacement parts out.
Don,
Yes they have. Now I just wish they would get a little better at the practice
of not requiring replacement parts <VBG>
I just rebuilt by NPro last night before my league race. I replaced my bungee
in the wheel because it was starting to be off center on return. You dont
realize how loose the bungee is until you replace it with a fresh one =)
Scott
PA-Scott
--
Scott B. Husted
ICQ# 4395450
Well sorry to hear that, it must be annoying to wait for the parts. I kind
of know since i wasn't able to drive GPL waiting for the springs. Maybe they
ran out of the parts you ordered and they have to get new one ?
As i stated i am very please by the service i recieved.
Regards,
Christian Giroux.
Hello Scott, you do have a good point, hehe. While i waited for my springs,
i changed the wires from the steering. It turned out that my red buttons
weren't working because the wires were cut. I also have a screwdriver (the
tool not the drink hehe) standing by for tightning back the wheel screw.
Christian Giroux.
By now they must be very practiced in the art of getting replacement parts
to customers with broken products.
Keep up the good work thrustmaster, ive been bitten once im not going to
touch your shit again.
Ilmore
Quoted text (9 lines)
>> Thrustmaster has always been good at getting replacement parts out. >> Don Burnette >Yes they are very good at it, and they deserve all the good words. Too >easy to forget about good things around and only rave about the bad >things. >Keep up the good work TM! >JoHSWell one of my springs just broke in my TM2 and I registered on TM website
and ordered new springs.. Now l'll see how good TM is, I cant beleive they
offer this service for free... YOu dont see this nice of a customer service
with many companies!! Im just glad i bought a TM product now....
PassedYa
One of the main reasons I support TM products and will continue to do so is
because they support their customers. They used to monitor this ng fairly
often, not sure if they still do. They don't sell you something and then
forget you as do many manufacturers. You just reminded me that I have one of
my accelerator springs broken (only the second in 2 years) and need to go to
their site and order one. Bungee is starting to get a bit sloppy too, not
bad, but will see if they can send me one of those too just in case. At
least I know that they will take care of me in a very short time, and will
continue that support as long as I own their product. This can't be said by
any manufacturer in their price range that I know of. Keep up the good work,
and thanks if you read this, TM. For price, quality, and most of all,
support you are hard to beat.
--
Regards,
Ed Medlin
www.flyairwest.com
> Well one of my springs just broke in my TM2 and I registered on TM website
> and ordered new springs.. Now l'll see how good TM is, I cant beleive they
> offer this service for free... YOu dont see this nice of a customer
service
> with many companies!! Im just glad i bought a TM product now....
> PassedYa
> > Scott B. Husted a crit dans le message
> > >I just rebuilt by NPro last night before my league race. I replaced my
> > bungee
> > >in the wheel because it was starting to be off center on return. You
> dont
> > >realize how loose the bungee is until you replace it with a fresh one
=)
> > Hello Scott, you do have a good point, hehe. While i waited for my
> springs,
> > i changed the wires from the steering. It turned out that my red buttons
> > weren't working because the wires were cut. I also have a screwdriver
(the
> > tool not the drink hehe) standing by for tightning back the wheel screw.
> > Christian Giroux.
> Bungee is starting to get a bit sloppy too, not
>bad, but will see if they can send me one of those too just in case. At
>least I know that they will take care of me in a very short time, and will
>continue that support as long as I own their product.
Ed, I had a similar problem and ordered a bungee and a new steering pot for
my T2. Not only did they send me these items, but they also sent me two new
pulley/guides for the bungee. As it turned out, one of mine was badly
broken. Adding the fresh bungee, pot, and replacing the pulley made my T2
feel brand new. Thrustmaster really does have great support.
Dave Ewing
Ordered new pots and springs for my 3 year old T2 friday night remembering
when I ordered a spring about a year ago it showed up on my doorstep 5 days
later. I also read this original post a short time later. Realizing just how
happy I have been with Thrustmaster products I decided what the hell I think
it's time for a new wheel setup. Saturday morning I went down and bought a
new Nascar Pro setup. When the T2 parts come in I will rebuild it and pass
it on to my son.
Service and support really do pay off. I never considered any product other
than Thrustmaster.
Joe
I've been trying to contact TM to order new
springs for my Nascar Pro. The result... online it
says the unit is not serviceable. (i've got it
apart waiting). I sent support an e-mail and I've
also faxed them a request... nothing.
% I've been trying to contact TM to order new
% springs for my Nascar Pro. The result... online it
% says the unit is not serviceable. (i've got it
% apart waiting). I sent support an e-mail and I've
% also faxed them a request... nothing.
I am confused, as I just checked Thrustmaster's web site and you can
order springs for this unit. You will need to setup a login and
register your product and then you can order parts. Did you go to the
following link
<http://www.thrustmaster.com/support/cs/customer/login.cfm>?
The NASCAR Pro is still serviceable and if need be you can get an RMA if
the parts you need are not listed in the Order Parts section.
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
I registered on-line and ordered parts at the TM web site. The parts came
only days later (full marks to ThrustMaster).
You can do this too..
=rez=
