Had my TM Pro for about 3 wks & yes just had to replace the springs on gas
pedal :). Problem is that when I closed it back up & recalibrated (seperate
axis mode) full throttle caused a *** pull to the right on the steering
input. Steering all the way to the left caused the it to drop down as if
braking had occured. I downloaded TMSCOPE & found that the steering was on
the X1 axis (centred) gas on the Y1 axis (noncentred) but the only way I
could register the brake movement was through the X2 axis. Now this had me
totally confused so I closed it up & thought I would wait for a response to
the request for support from TM and just use the wheel in combo mode which
was working ok. Recalibrated in WIN95 & got a not connected mode when pro
with combo pedals selected. Flick the switch in pedal base, over to seperate
& get an ok mode for connection but of course I can't calibrate brake as it
is physically in seperate mode. So my Pro is toast :( Any ideas would be
greatly appreciated.
Isn't Disney World a people trap operated by a mouse?
Barry Stoch - Warped Racing
[link lost in import: /~bstoch/warpedracing.html]
Dohhhhhh I can't escape you :) Thanks for the tip Phil I'll file it in the
appropriate basket
Should crematoriums give discounts for burn victims?
If you try to fail, and succeed, which have you done?
If most car accidents occur within five miles of home, why doesn't
everyone just move 10 miles away?
Atheism is a nonprophet organization.
Barry Stoch - Warped Racing
[link lost in import: /~bstoch/warpedracing.html]
Quoted text (35 lines)
>>Had my TM Pro for about 3 wks & yes just had to replace the springs on >gas >>pedal :). Problem is that when I closed it back up & recalibrated >(seperate >>axis mode) full throttle caused a *** pull to the right on the >steering >>input. Steering all the way to the left caused the it to drop down as >if >>braking had occured. I downloaded TMSCOPE & found that the steering >was on >>the X1 axis (centred) gas on the Y1 axis (noncentred) but the only way >I >>could register the brake movement was through the X2 axis. Now this >had me >>totally confused so I closed it up & thought I would wait for a >response to >>the request for support from TM and just use the wheel in combo mode >which >>was working ok. Recalibrated in WIN95 & got a not connected mode when >pro >>with combo pedals selected. Flick the switch in pedal base, over to >seperate >>& get an ok mode for connection but of course I can't calibrate brake >as it >>is physically in seperate mode. So my Pro is toast :( Any ideas would >be >>greatly appreciated. >Hello Barry, Its your MAPI Spooler....that's where the problem is....in >your MAPI Spooler...OK? >-- >#33 >Zandvoort >1.28.56>Had my TM Pro for about 3 wks & yes just had to replace the springs on gas
>pedal :). Problem is that when I closed it back up & recalibrated (seperate
>axis mode) full throttle caused a *** pull to the right on the steering
>input. Steering all the way to the left caused the it to drop down as if
>braking had occured. I downloaded TMSCOPE & found that the steering was on
>the X1 axis (centred) gas on the Y1 axis (noncentred) but the only way I
>could register the brake movement was through the X2 axis. Now this had me
>totally confused so I closed it up & thought I would wait for a response to
>the request for support from TM and just use the wheel in combo mode which
>was working ok. Recalibrated in WIN95 & got a not connected mode when pro
>with combo pedals selected. Flick the switch in pedal base, over to seperate
>& get an ok mode for connection but of course I can't calibrate brake as it
>is physically in seperate mode. So my Pro is toast :( Any ideas would be
>greatly appreciated.
Hello Barry, Its your MAPI Spooler....that's where the problem is....in
your MAPI Spooler...OK?
--
#33
Zandvoort
1.28.56
You mean I haven't FILLED that basket yet..?
--
#33
Zandvoort
1.28.56
>Dohhhhhh I can't escape you :) Thanks for the tip Phil I'll file it in
the
>appropriate basket
>Should crematoriums give discounts for burn victims?
>If you try to fail, and succeed, which have you done?
>If most car accidents occur within five miles of home, why doesn't
>everyone just move 10 miles away?
>Atheism is a nonprophet organization.
>Barry Stoch - Warped Racing
>[link lost in import: /~bstoch/warpedracing.html]
>>>Had my TM Pro for about 3 wks & yes just had to replace the springs
on
>>gas
>>>pedal :). Problem is that when I closed it back up & recalibrated
>>(seperate
>>>axis mode) full throttle caused a *** pull to the right on the
>>steering
>>>input. Steering all the way to the left caused the it to drop down
as
>>if
>>>braking had occured. I downloaded TMSCOPE & found that the steering
>>was on
>>>the X1 axis (centred) gas on the Y1 axis (noncentred) but the only
way
>>I
>>>could register the brake movement was through the X2 axis. Now this
>>had me
>>>totally confused so I closed it up & thought I would wait for a
>>response to
>>>the request for support from TM and just use the wheel in combo mode
>>which
>>>was working ok. Recalibrated in WIN95 & got a not connected mode
when
>>pro
>>>with combo pedals selected. Flick the switch in pedal base, over to
>>seperate
>>>& get an ok mode for connection but of course I can't calibrate
brake
>>as it
>>>is physically in seperate mode. So my Pro is toast :( Any ideas
would
>>be
>>>greatly appreciated.
>>Hello Barry, Its your MAPI Spooler....that's where the problem
is....in
>>your MAPI Spooler...OK?
>>--
>>#33
>>Zandvoort
>>1.28.56


































