I need some Steering Wheel help

I currently have the ThrustMaster NASCAR SUPER SPORT wheel and pedal set, and don't really have many complaints about it except the following: How the hell can I get DOS-based games to recognize & calibrate this wheel\pedal combo?? I dug out some of the older games I had in my closet in order to try out the new control combo, but the wheel won't calibrate in these DOS-based games! I was trying to play Network Q RAC RALLY, which I used to play without a problem with my older THRUSTMASTER T2 combo. I have COLIN McRAE RALLY now and I'm really impressed with it too. Since it (CMR)is a WINDOWS application, it works without any probs at all. Network Q RAC RALLY on the other hand is a DOS-Based program, and no matter what I try I CANNOT seem to get it to recognize the new controls (TM NASCAR Super Sport)! I used to be able to play it with the older TM T2 combo, so why won't this work with a newer, updated TM wheel? Basically, I want to be able to have a fully calibrated control system that recognizes the controls while in DOS-mode, and allows them to be used in a game which originates from a DOS prompt. Does anyone have any ideas on how to get this wheel to calibrate in DOS games like Network Q RAC RALLY? Thanks in advance for your help! Sincerely Cary Martynuik

I've just got a TM Formula Sprint (called something different out side of the UK I think...) as a FREE replacement for a GP1. The GP1 used to work fine, like your T2, in Windows and DOS games (GP2 in particular). Last night I tried GP2 for the first time with the new wheel, and was having similar problems to you. I tried without the pedals, using the wheel paddles, with no success. However, plugging in the pedals I had more success. I calibrated Joystick A X-axis (steering) and Joystick B Y-axis (pedals) and this worked! In GP2 you can also select "control driven calibration" which worked also. I couldn't get the steering wheel paddles to work with this method, the right paddle is recognised, but not the left one! Hope this might help, any other ideas would be helpful too! Neil ps the wheel works fine in GPL & other Windows based games with either the wheel mounted paddles OR the floor pedals.

Quoted text (28 lines)

> I currently have the ThrustMaster NASCAR SUPER SPORT wheel and pedal > set, and don't really have many complaints about it except the > following: > How the hell can I get DOS-based games to recognize & calibrate this > wheel\pedal combo?? I dug out some of the older games I had in my closet > in order to try out the new control combo, but the wheel won't calibrate > in these DOS-based games! > I was trying to play Network Q RAC RALLY, which I used to play without > a problem with my older THRUSTMASTER T2 combo. I have COLIN McRAE RALLY > now and I'm really impressed with it too. Since it (CMR)is a WINDOWS > application, it works without any probs at all. > Network Q RAC RALLY on the other hand is a DOS-Based program, and no > matter what I try I CANNOT seem to get it to recognize the new controls > (TM NASCAR Super Sport)! I used to be able to play it with the older TM > T2 combo, so why won't this work with a newer, updated TM wheel? > Basically, I want to be able to have a fully calibrated control system > that recognizes the controls while in DOS-mode, and allows them to be > used in a game which originates from a DOS prompt. > Does anyone have any ideas on how to get this wheel to calibrate in DOS > games like Network Q RAC RALLY? > Thanks in advance for your help! > Sincerely > Cary Martynuik

Some tips on getting the Sprint to work fully in GP2: Note: When setting up in GP2, make sure you select "controller driven". It looks like the docs for the Sprint on the CD-ROM are wrong. In DOS the paddles are: Right = Joystick A Vertical (Y1) Left = Joystick B Horizontal (X2) The pedals are: Accelerator = Joystick 2 Vertical (Y2) Brake = Joystick 2 Vertical (Y2) So for GP2: Steering = Joystick A Horizontal Accelerator = Joystick B Vertical (for pedal) or Joystick A Vertical (paddle) Brake = Joystick B Vertical (for pedal) or Joystick B Horizontal (paddle) Clutch = (if using pedals only) Joystick B Horizontal (left paddle) or Joystick A Vertical (right paddle) Gears = Your choice of Joystick A or B (A = top row, B = bottom row) As a side note: I've finally discovered a use for the pedals with the Sprint unit. In DOS (or in GPL as "generic" input), you can have the pedals plugged in and use one of the pedals for an analog clutch (should work with GP2 as well). In DOS with the pedals connected the following are the axes for the Sprint unit: Left paddle = Joystick 2 Horizontal (X2) Right paddle = Joystick 1 Vertical (Y1) Brake pedal = Joystick 2 Vertical (Y2) Gas pedal = Joystick 2 Vertical (Y2) Steering = Joystick 1 Horizontal (X1) Buttons = 4 (Joystick 1 & 2) -- **************************** Michael E. Carver ************************* Upside out, or inside down...False alarm the only game in town. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=

% I currently have the ThrustMaster NASCAR SUPER SPORT wheel and pedal % set, and don't really have many complaints about it except the % following: % How the hell can I get DOS-based games to recognize & calibrate this % wheel\pedal combo?? I dug out some of the older games I had in my closet % in order to try out the new control combo, but the wheel won't calibrate % in these DOS-based games! The SuperSport is hardwired to have the pedals on separate axes. This can be changed via software for Win95/8 programs only. If you DOS program will not support the pedals on separate axes, you are out of luck trying to get the SuperSport wheel to work. % I was trying to play Network Q RAC RALLY, which I used to play without % a problem with my older THRUSTMASTER T2 combo. I have COLIN McRAE RALLY % now and I'm really impressed with it too. Since it (CMR)is a WINDOWS % application, it works without any probs at all. % Network Q RAC RALLY on the other hand is a DOS-Based program, and no % matter what I try I CANNOT seem to get it to recognize the new controls % (TM NASCAR Super Sport)! I used to be able to play it with the older TM % T2 combo, so why won't this work with a newer, updated TM wheel? % Basically, I want to be able to have a fully calibrated control system % that recognizes the controls while in DOS-mode, and allows them to be % used in a game which originates from a DOS prompt. % Does anyone have any ideas on how to get this wheel to calibrate in DOS % games like Network Q RAC RALLY? -- **************************** Michael E. Carver ************************* Upside out, or inside down...False alarm the only game in town. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=