I'm driving CMR with CH virtual pilot pro
and pedels, anyone know how to get the
pedals switched around? I have got used
to them the wrong way round but I should
like to put them right if there is a way.
Thanks
MB
Hi Mark, I have exactly the same setup as yourself
(Colin McRae Rally,CH vp-pro and pro-pedals) and I can't
even get the pedals working! can you help me? :) Sorry if
you thought I had a solution for your difficulties, but
you've got further than I have here!
B.T.W CMR really does rock, don' it! ;) Its the most fun driving
sim I ever played......
> Hi Mark, I have exactly the same setup as yourself
> (Colin McRae Rally,CH vp-pro and pro-pedals) and I can't
> even get the pedals working! can you help me? :) Sorry if
> you thought I had a solution for your difficulties, but
> you've got further than I have here!
Well, I'm using a setup I found for urace, which goes like this:
can't set foot pedals up . . .CH propilot/rudder . . 12/31/97 . 20:16
I have CH ProPilot with pedals I have configured them in windows and
work properly. How do I get Ultimate Race
provided with Matrox m3d to recognize foot pedals? joystick+
Wheel+kbd does not seem to see pedals
. . .Mike Demers . . 01/01/98 . 05:02
. . .I have been waiting for an answer to the same problem
for a while but i can tell you what to do in the
mean time
Set your CH pedals to the rudder setting and then go into
win 95 joystick panel and configure your
joystick as a "Thrustmaster T1\T2 without adapter"
You will notice that when you calibrate the wheel and stick
that the pedals now use the y axis of joystick
1 but are reversed(ie brake is gas) but dont worry about it
because you can configure the controls in
Ultimate Race
It works fine !
Maybe this is why mine work at all (set pedel switch to plane)
but they are the wrong way round.
MB
> B.T.W CMR really does rock, don' it! ;) Its the most fun driving
> sim I ever played......
I had CH pedals and I installed a switch that would reverse the wires going
to gas and brake.
Lutrell
Quoted text (35 lines)
>> Hi Mark, I have exactly the same setup as yourself >> (Colin McRae Rally,CH vp-pro and pro-pedals) and I can't >> even get the pedals working! can you help me? :) Sorry if >> you thought I had a solution for your difficulties, but >> you've got further than I have here! >Well, I'm using a setup I found for urace, which goes like this: >can't set foot pedals up . . .CH propilot/rudder . . 12/31/97 . 20:16 > I have CH ProPilot with pedals I have configured them in windows and >work properly. How do I get Ultimate Race > provided with Matrox m3d to recognize foot pedals? joystick+ >Wheel+kbd does not seem to see pedals > . . .Mike Demers . . 01/01/98 . 05:02 > . . .I have been waiting for an answer to the same problem >for a while but i can tell you what to do in the > mean time > Set your CH pedals to the rudder setting and then go into >win 95 joystick panel and configure your > joystick as a "Thrustmaster T1\T2 without adapter" > You will notice that when you calibrate the wheel and stick >that the pedals now use the y axis of joystick > 1 but are reversed(ie brake is gas) but dont worry about it >because you can configure the controls in > Ultimate Race > It works fine ! >Maybe this is why mine work at all (set pedel switch to plane) >but they are the wrong way round. >MB >> B.T.W CMR really does rock, don' it! ;) Its the most fun driving >> sim I ever played......Many thanks Mark, this has helped me a lot, I was hoping that
CMR would recognise axis 3 and 4, so I could have my CH pro-
pedals in "car" mode but I have just been on the phone with
codemasters tech support and they say the game is written
to support only the axis 1 and 2, and no futher support is
planned, even in subsqent patches :( So no left foot braking
for me then...... ***!
