I'm soon going to get a new computer and was wondering what kind of
computer I should really buy, I would like to get nothing less than a
PII 350 with at least 64MB of RAM, with a 56K Modom and at least a 8 Gig
HD, but my problem is what brand of computer would be best, I don't want
a computer with build in sounds cards into the motherboard or anything
else biuld into the motherboard for that matter, so if anyone can direct
me to a system that doesn't have that then plese let me know. Also if it
all possible to have the computer with a really good 3D Accerator on
board (1 or 2 boards of this kind if possible), either AGP or PCI it
doesn't matter
I would be using the computer for hard core *** and doing heavy
graphic work.
Dwayne W.
Nascar United - Co-Webmaster
http://come.to/Nascar-United
Advice on buying or building a sim PC
A user asked which brand of PC to buy. Most recommended building your own with an Abit or Asus board, a PII or overclocked Celeron, 128MB RAM and a Voodoo2 or TNT card, and shared parts sources and modem IRQ advice.
hardware: PC/graphics
Automated summary.
Hey Dwayne, ever consider just building your own? It's really the only
way to get exactly what you want in a machine. I was sort of hesitant to
do it myself, but now that I have, I'd never go back! It's also way
cheaper in the long run. If you're worried about difficulty, don't be.
Anyone that's built their own machine will tell you that researching which
components to buy is much harder than actually putting them together.
-Bill
--
Bill Mette | "A person is smart. People are dumb."
MCSNet, Chicago | - K MiB
Dwayne it sounds like you need to build your own system. You'll never get
what you want from the Dell's, and Gateways.
I built my own system, with the latest hardware, the way I wanted and in the
end I saved 50%.
-Rod
Quoted text (17 lines)
>I'm soon going to get a new computer and was wondering what kind of >computer I should really buy, I would like to get nothing less than a >PII 350 with at least 64MB of RAM, with a 56K Modom and at least a 8 Gig >HD, but my problem is what brand of computer would be best, I don't want >a computer with build in sounds cards into the motherboard or anything >else biuld into the motherboard for that matter, so if anyone can direct >me to a system that doesn't have that then plese let me know. Also if it >all possible to have the computer with a really good 3D Accerator on >board (1 or 2 boards of this kind if possible), either AGP or PCI it >doesn't matter >I would be using the computer for hard core *** and doing heavy >graphic work. >Dwayne W. >Nascar United - Co-Webmaster >http://come.to/Nascar-UnitedI bought my system from [link lost in import: /,128MB,ASUS]
P2b-S BX MB with SCSI built in, (SCISI cost more but I had SCSI drives
already) two SCSI hard drives for 9 GB, 32X CD ROM, Sound Blaster Live
Value, Matrox Millenium (my old display card for 2d), two Monster 3d 2 12MB
in SLI, USR 56K modem(Dont get Winmodem), W98, Cambridge Soundworks
Speakers.
As you can see they will build with your old components if you want and they
sell most all the top quality sound, Video cards and other components (they
sell Riva TNT cards also) or you can bring them what you want in it. The
price is good also. I got the ASUS MB for reliability and P2 350 because I
dont feel confident to play with overclocking yet, but if you do then Abit
MB and Celeron 300a is better for overclocking and cost less.
IMO the best video cards are Riva TNT (AGP),Voodoo 2 (PCI)or Banshee (PCI).
Most all brands are the same except for Canopus (more features and hight=er
price)
I was going to get a Riva TNT video card but I already had the V2 so I just
added another V2 for SLI. If I need another PCI slot then I will get the TNT
AGP card.
There are also companies that make systems stricktly for ***, but for a
high price usually:
[link lost in import]
[link lost in import]
For reviews go to [link lost in import]
Other info on hardware [link lost in import]
http://www.gamecopyworld.com/
Good luck
Lutrrell :-)
Quoted text (10 lines)
>I'm soon going to get a new computer and was wondering what kind of >computer I should really buy, I would like to get nothing less than a >PII 350 with at least 64MB of RAM, with a 56K Modom and at least a 8 Gig >I would be using the computer for hard core *** and doing heavy >graphic work. >Dwayne W. >Nascar United - Co-Webmaster >http://come.to/Nascar-UnitedFirst, you can't buy the system you need directly from any retailer. You
can expect to have to build it yourself.
Second, here's the components I'd get:
1) Abit BH6
2) Intel P2/350, 400, or 450 (depends on budget)
3) 64MB PC100 ram (or even 128MB - again depending on budget)
4) Creative Labs Graphics Blaster TNT/AGP
5) Voodoo2/12MB (any manufacturer is pretty much the same)
6) SB-Live "Value" sound card
7) CD-ROM, mouse, keyboard, floppy drive
8) 2gb or 3gb hard drive just for win95/98
9) 8gb (or larger) hard drive for all your apps
10) Get an EXTERNAL U.S.Robotics Sportster 33.6k fax modem.
As far as the modem goes, 56K modems are a scam and are completely
usesless (can't connect at higher than 33.6 speeds) if you're more than
three miles from your telco switch - you may not be able to FIND anything
that's not a 56K modem at this point, but that's okay because it'll work
just fine at the slower speeds too. One last note here - do NOT buy a
winmodem or an internal modem. Winmodems only work under windows and
steal CPU cycles during operation (not a good thing for online ***).
Internal modems are ALWAYS a son0-of-a-*** to configure and keep
working. I've never had an internal modem that worked as advertised or
didn't***with Win95/98. You might even want to consider getting a
USB modem. Alison Hine has had great connections in GPL using one of
these.
Your mileage may vary.
--
=========================================================
John Simmons - Redneck Techno-Biker (Zerex12)
http://www.members.home.net/jms1/index.html
John Simmons - Barbarian Diecast Collector
http://members.home.net/jsimm/diecast_index.html
IGPS Director
http://members.home.net/jms1/igps.html
If you want to send me email, go to either of the URL's
shown above & click "Send Me Mail" in the contents frame.
=========================================================
>Dwayne it sounds like you need to build your own system. You'll never get
>what you want from the Dell's, and Gateways.
Dwayne - you can try Micron - www.micronpc.com. If you
configure and order it off the web, you can get just about
anything you want. Most systems start with onboard sound,
but you can change all that and update your price before
you actually order it... keep in mind that shipping and tax
will probably add nearly $300 to the total that the website
shows you.
Start with their "Millenia Max" configuration if it's power
you want...
Building your own system from scratch is still a good way
to go, but there are alternatives...
- m.
============================================
Mike Holthouse - Indianapolis, IN
Drop the "X" to e-mail me.
============================================
>One last note here - do NOT buy a winmodem
Excellent advice! Spend the extra $20 or $30 for a "real"
modem with jumpers on the board...
I disagree here - I have always had good luck by getting an
internal modem WITH COM AND IRQ JUMPERS so that I can force it to
use COM 3, IRQ 5. Forget plug-and-pray ***for modems. The only
problems I have had with those settings is on a Packard Bell
computer, but I didn't have a lot of time to tinker with it
either...
Yes, you may have to monkey around with Win9x to free
up IRQ 5, but it can be done, and once it's done, it shouldn't
give you any more problems... Plus, if you upgrade your
modem by pulling out the old and sticking in the new (with
the COM3/IRQ5 settings made) without re-booting, the
configuration is easier - nothing has a chance to grab your
IRQ 5 that way...
My $0.02...
- m.
============================================
Mike Holthouse - Indianapolis, IN
Drop the "X" to e-mail me.
============================================
I keep reading about people who build their own systems, and having done some
reconfiguring, I think I could probably do it. My question is what source do
people use for the parts for these systems?
Thanks,
Mike U.
Quoted text (57 lines)
> >I'm soon going to get a new computer and was wondering what > >kind of computer I should really buy, I would like to get > >nothing less than a PII 350 with at least 64MB of RAM, > >with a 56K Modom and at least a 8 Gig HD, but my problem is > >what brand of computer would be best, I don't want a > >computer with build in sounds cards into the motherboard... > >...snip... > >I would be using the computer for hard core *** and doing heavy > >graphic work. > First, you can't buy the system you need directly from any retailer. You > can expect to have to build it yourself. > Second, here's the components I'd get: > 1) Abit BH6 > 2) Intel P2/350, 400, or 450 (depends on budget) > 3) 64MB PC100 ram (or even 128MB - again depending on budget) > 4) Creative Labs Graphics Blaster TNT/AGP > 5) Voodoo2/12MB (any manufacturer is pretty much the same) > 6) SB-Live "Value" sound card > 7) CD-ROM, mouse, keyboard, floppy drive > 8) 2gb or 3gb hard drive just for win95/98 > 9) 8gb (or larger) hard drive for all your apps > 10) Get an EXTERNAL U.S.Robotics Sportster 33.6k fax modem. > As far as the modem goes, 56K modems are a scam and are completely > usesless (can't connect at higher than 33.6 speeds) if you're more than > three miles from your telco switch - you may not be able to FIND anything > that's not a 56K modem at this point, but that's okay because it'll work > just fine at the slower speeds too. One last note here - do NOT buy a > winmodem or an internal modem. Winmodems only work under windows and > steal CPU cycles during operation (not a good thing for online ***). > Internal modems are ALWAYS a son0-of-a-*** to configure and keep > working. I've never had an internal modem that worked as advertised or > didn't***with Win95/98. You might even want to consider getting a > USB modem. Alison Hine has had great connections in GPL using one of > these. > Your mileage may vary. > -- > ========================================================= > John Simmons - Redneck Techno-Biker (Zerex12) > http://www.members.home.net/jms1/index.html > John Simmons - Barbarian Diecast Collector > http://members.home.net/jsimm/diecast_index.html > IGPS Director > [link lost in import] > If you want to send me email, go to either of the URL's > shown above & click "Send Me Mail" in the contents frame. > =========================================================I think it would be a shame not to go for the Celeron 300a overclocked
to 450, on an ABIT motherboard. It's possible that it won't work right
at 450, but then you'd have a 374, still very cheap.
rob.
Quoted text (17 lines)
>I'm soon going to get a new computer and was wondering what kind of >computer I should really buy, I would like to get nothing less than a >PII 350 with at least 64MB of RAM, with a 56K Modom and at least a 8 Gig >HD, but my problem is what brand of computer would be best, I don't want >a computer with build in sounds cards into the motherboard or anything >else biuld into the motherboard for that matter, so if anyone can direct >me to a system that doesn't have that then plese let me know. Also if it >all possible to have the computer with a really good 3D Accerator on >board (1 or 2 boards of this kind if possible), either AGP or PCI it >doesn't matter >I would be using the computer for hard core *** and doing heavy >graphic work. >Dwayne W. >Nascar United - Co-Webmaster >http://come.to/Nascar-United>>I would be using the computer for hard core *** and doing heavy
>>graphic work.
>Second, here's the components I'd get: [SNIP]
>3) 64MB PC100 ram (or even 128MB - again depending on budget)
If you're doing "heavy graphic work" and you want full race replays in
GPL, you need 128MB.
[SNIP]
For ***, this is the best combo you can get. But again noting the
"hevy graphic work" you mention, you may want to get a Matrox or Number
Nine card for thier 2D image quality. You would, of course, be stuck
solely with the Voodoo for your 3D acceleration. Only you can decide if
this is something you're willing to do.
[SNIP]
True in principle, but not necessarily in number. 56k modems have a
hard time if your ISP's dial-up is outside of your "local call" band.
This is usually 7-10 miles for most US residential carriers.
Also, your "local" switch is not necessarily the one that is
geographically closest to you. My "local" switch is actually 5+ miles
further away from my house than the one that is physically closest. It
all depends on how the phone system is laid out in your area.
BTW - Are you starting to see why I said choosing the pieces is harder
than putting them together? :o)
--
Bill Mette | "A person is smart. People are dumb."
MCSNet, Chicago | - K MiB
Only you can decide who is a "good" vendor. But in terms of popularity,
two of the more famous sites are:
http://www.tccomputers.com and
http://www.memory-man.com
--
Bill Mette | "A person is smart. People are dumb."
MCSNet, Chicago | - K MiB
>I think it would be a shame not to go for the Celeron 300a overclocked
>to 450, on an ABIT motherboard. It's possible that it won't work right
>at 450, but then you'd have a 374, still very cheap.
No no no. Overclocking a 300a to 450 MHz and 374 MHz are two different
things. 450 only changes the FSB (CPU and memory) speed to 100MHz.
Setting an 83MHz bus to obtain 374 changes everything (including your PCI
slots) to using the 83MHz speed. Some older/crappier PCI cards can run
into problems with this setting.
-Bill
--
Bill Mette | "A person is smart. People are dumb."
MCSNet, Chicago | - K MiB
> I keep reading about people who build their own systems, and having done some
> reconfiguring, I think I could probably do it. My question is what source do
> people use for the parts for these systems?
Mike,
I go with whoever has the best pricing for the parts I want. Once I know
what I'm after, I look it up on http://www.pricewatch.com
Trips
says...
I mainly shop locally. San Diego has a LARGE concentration of computer
stores - you literally cannot drive one block without seeing one. Lots
of competition, lots of good prices.
--
=========================================================
John Simmons - Redneck Techno-Biker (Zerex12)
http://www.members.home.net/jms1/index.html
John Simmons - Barbarian Diecast Collector
http://members.home.net/jsimm/diecast_index.html
IGPS Director
http://members.home.net/jms1/igps.html
If you want to send me email, go to either of the URL's
shown above & click "Send Me Mail" in the contents frame.
=========================================================
I found a NG for build-your-own computers or for any computer question at
alt.comp.hardware.pc-homebuilt
Lutrell :-)
>-Bill
>--
>Bill Mette | "A person is smart. People are dumb."
>MCSNet, Chicago | - K MiB
I had no idea that this topic would be so played out. Thanks everyone for the
info, I'll take it into conseration as far as possibly building my own
system. You guys and/or girls are a big help.
Dwayne W.
Nascar United - Co-Webmaster
http://come.to/Nascar-United
Quoted text (13 lines)
> I found a NG for build-your-own computers or for any computer question at > alt.comp.hardware.pc-homebuilt > Lutrell :-) > >-Bill > >-- > >Bill Mette | "A person is smart. People are dumb." > >MCSNet, Chicago | - K MiBDitto Dwayne. This is the system I built and the cost.
Mid-tower-350w PS
Asus P2B mb-P2-400 128megs PC-100
WD 6gig and WD 4gig(One for me and one for Mama....:-)
Iomega Zip
Floppy
40X Asus cdrom
STB V4400 TNT/AGP (Still using my old Voodoo-1 for a little while for
3dfx-only apps)
SB-PCI128 sound card with Cambridge surround system and sub-woofer
56k Rockwell fax/voice modem
AOC Spectrum 17in monitor
Total cost of system-$1350 and change. This would cost over $2000 easy if
bought assembled. The thing I like the best is that I got what "I" wanted in
the system, at a much lower cost than an over-the-counter system that may
not have the top quality components I wanted. I cut a little on the monitor,
but it works great until I can afford the 21" Trinitron........:-). Note:
Make sure you buy from reputable suppliers. Re-marked P2 chips are showing
up fairly often. I bought the MB and processor from a local dealer who I
know and trust. He also matched or beat prices that I got over the internet
at some of the mail-order companies on some of the other components, so shop
around, and don't forget about the local dealers. They can give you the best
deals sometimes and you always know where they are.....Good luck.
Regards,
Ed Medlin
www.flyairwest.com
Reach me by ICQ. My ICQ# is 191942
Page me online through my Personal Communication Center:
http://wwp.mirabilis.com/191942
Send me E-mail Express directly to my computer screen
>> I keep reading about people who build their own systems, and having done some
>> reconfiguring, I think I could probably do it. My question is what source do
Then I print them out and take them to a local dealer and see if they will
meet or beat the prices.....then I have local support, and usually better
warranties. JMHO.......
Regards,
Ed Medlin
www.flyairwest.com
Reach me by ICQ. My ICQ# is 191942
Page me online through my Personal Communication Center:
http://wwp.mirabilis.com/191942
Send me E-mail Express directly to my computer screen
Quoted text (8 lines)
>> people use for the parts for these systems? >Mike, >I go with whoever has the best pricing for the parts I want. Once I know >what I'm after, I look it up on http://www.pricewatch.com >TripsQuoted text (17 lines)
> >> I keep reading about people who build their own systems, and having done > some > >> reconfiguring, I think I could probably do it. My question is what > source do > >> people use for the parts for these systems? > >Mike, > >I go with whoever has the best pricing for the parts I want. Once I know > >what I'm after, I look it up on http://www.pricewatch.com > >Trips > Then I print them out and take them to a local dealer and see if they will > meet or beat the prices.....then I have local support, and usually better > warranties. JMHO....... > Regards, > Ed MedlinSpeaking of San Diego...
Is West Coast Hobbies still in business out there?
-Larry
> I mainly shop locally. San Diego has a LARGE concentration of computer
> stores - you literally cannot drive one block without seeing one. Lots
> of competition, lots of good prices.
Hmmm, have to disagree here I'm afraid, my 56k modem (Pace56k internal
voice/data/fax) was one of the best buys I ever made, especially for
on-line ***? If they are configured correctly, and your ISP can
handle it (mine can) they *can* use 56k, but only in one direction,
the other direction uses 33.6k.
Have you patched your modem to v90?
Correct, winmodems are not a good idea for on-line ***, buy
otherwise work fine.
Erm, have to disagree with you again here.....
I've always used internal modems (from my very first 2400!!!!!)
mainly cos they don't take up any extra room or an extra power source.
If you set it up right, an internal modem will work just as good as an
external one. All mine have worked great, and I've never really had
any problems with them?
8-)
*Peter* #:-)
Yes - they'r up on Convoy Ct...
--
=========================================================
John Simmons - Redneck Techno-Biker (Zerex12)
http://www.members.home.net/jms1/index.html
John Simmons - Barbarian Diecast Collector
http://members.home.net/jsimm/diecast_index.html
IGPS Director
http://members.home.net/jms1/igps.html
If you want to send me email, go to either of the URL's
shown above & click "Send Me Mail" in the contents frame.
=========================================================
Quoted text (10 lines)
>Speaking of San Diego... >Is West Coast Hobbies still in business out there? >>I mainly shop locally. San Diego has a LARGE concentration of computer >>stores - you literally cannot drive one block without seeing one. Lots >>of competition, lots of good prices.Man, I sure spent a huge chunk of my Navy Salary in that place. I
wonder if John still owns it...
-Larry
Quoted text (30 lines)
> Yes - they'r up on Convoy Ct... > >Speaking of San Diego... > >Is West Coast Hobbies still in business out there? > >>I mainly shop locally. San Diego has a LARGE concentration of computer > >>stores - you literally cannot drive one block without seeing one. Lots > >>of competition, lots of good prices. > -- > ========================================================= > John Simmons - Redneck Techno-Biker (Zerex12) > http://www.members.home.net/jms1/index.html > John Simmons - Barbarian Diecast Collector > http://members.home.net/jsimm/diecast_index.html > IGPS Director > http://members.home.net/jms1/igps.html > If you want to send me email, go to either of the URL's > shown above & click "Send Me Mail" in the contents frame. > =========================================================why IRQ 5 ?
What does that do for you ?
I am using IRQ 3 and so far so good.
Quoted text (34 lines)
> >One last note here - do NOT buy a winmodem > Excellent advice! Spend the extra $20 or $30 for a "real" > modem with jumpers on the board... > > or an internal modem. Winmodems only work under windows and > >steal CPU cycles during operation (not a good thing for online ***). > >Internal modems are ALWAYS a son0-of-a-*** to configure and keep > >working. I've never had an internal modem that worked as advertised or > >didn't***with Win95/98. > I disagree here - I have always had good luck by getting an > internal modem WITH COM AND IRQ JUMPERS so that I can force it to > use COM 3, IRQ 5. Forget plug-and-pray ***for modems. The only > problems I have had with those settings is on a Packard Bell > computer, but I didn't have a lot of time to tinker with it > either... > Yes, you may have to monkey around with Win9x to free > up IRQ 5, but it can be done, and once it's done, it shouldn't > give you any more problems... Plus, if you upgrade your > modem by pulling out the old and sticking in the new (with > the COM3/IRQ5 settings made) without re-booting, the > configuration is easier - nothing has a chance to grab your > IRQ 5 that way... > My $0.02... > - m. > ============================================ > Mike Holthouse - Indianapolis, IN > Drop the "X" to e-mail me. > ============================================I use com 3 and IRQ 5 because nothing else usually does...
(well, in the past, anyway...) IRQ 3 and 4 are shared between
coms 2 and 4 and coms 1 and 3, which never really made
sense to me... a lot of sound cards default to irq 5, and I
usually end up changing them to 7 or 10 to avoid conflicts...
If you were ever to add a serial mouse to com 1 or 2, you
may have a conflict... I have 2 mice hooked up all the time -
my regular ps2 mouse as well as a trackball, so it always
has been and continues to be easiest for me to stick the
modem on com 3, irq 5 and forget about it... ymmv...
- m.
============================================
Mike Holthouse - Indianapolis, IN
Drop the "X" to e-mail me.
============================================
>Hey Dwayne, ever consider just building your own? It's really the only
>way to get exactly what you want in a machine. I was sort of hesitant to
>do it myself, but now that I have, I'd never go back!
It's true. Surprisingly easy to do, but can be nervewracking the first
time. I've done 3 PCs in total, as well as swapped 2 of these around
between cases after getting them running and don't worry about it now.
I guess a prepackaged product is good because you know it will, or
ought to, work straight from the box. Any problems you have with a
homebuilt system you'll need to investigate yourself to fix. It helps
having known working spare parts you can swap in when id-ing the bit
that won't work.
Stuart
--
Stuart Booth
Somewhere in Buckinghamshire, England, UK
Note: My email address is in disguise! Remove trailing Z
What I am wondering is how the hell do you pull a modem out and
install a new one without rebooting?! The below sounds like some
seriously bad advice to me....
Why not just use the serial port defaults? I've never found it to be
problem, and modems are the least problematic things I've had to set
up.
Cheers!
John


































