Race Sim Central
Rec.Autos.Simulators Archive

GPL - (1.2 fps with i740 videocard ) A shame !!!!

6 posts by 5 people · 09 Dec 1998 - 12 Dec 1998

Can somebody help me to improve the framerate of GPL ? I have an AMD k6-2 333Mhz , 32 mb ram and an intel 740i 8mb agp videocard . I also downloaded the open gl beta patch. I run GPL on 640X480 with min details . Thanks a lot for the tips !!
P Gagg 10 Dec 1998#439329
> Can somebody help me to improve the framerate of GPL ? > I have an AMD k6-2 333Mhz , 32 mb ram and an intel 740i 8mb agp > videocard . > I also downloaded the open gl beta patch. > I run GPL on 640X480 with min details . > Thanks a lot for the tips !! Get more memory, 32Mb just isn't enough any more for serious games/sims. 64Mb is an absolute minimum and 128Mb is even better. If you have a BX m/b (100MHz bus) then get pc100 compliant memory. Get a 12Mb Voodoo2 or Rendition based 3D card, I don't *think* your card is either? Try overclocking your cpu, (you may be able to get 350, or 375, or even 415MHz?) depending on your m/b? No, I'm not gonna tell you how, (I'm not going through all that again!) check out any of the many good overclocking sites on the web. 8-) *Peter* #:-)
Schre 10 Dec 1998#439330
Try playing with the core.ini settings. First value should be set to 1.
Wosco 10 Dec 1998#439331
Get a 3d card such as a vodooo2 card or rendition. You can get a really good one of either for about $100 or if you want to go cheaper you can get a cheap diamond stealth 4MB. Check out pricewatch.com and go to video cards and select voodoo2 cards, you can find some good stuff. Wosco PS i just read peter gagg's message and just a note to him, an AMD is socket 7, a BX mobo i believe is slot 1 (pentium 2) >Can somebody help me to improve the framerate of GPL ? >I have an AMD k6-2 333Mhz , 32 mb ram and an intel 740i 8mb agp videocard . >I also downloaded the open gl beta patch. >I run GPL on 640X480 with min details . >Thanks a lot for the tips !!
Excuse me for commenting on two postings in one - I didn't get the original one. >> Can somebody help me to improve the framerate of GPL ? >> I have an AMD k6-2 333Mhz , 32 mb ram and an intel 740i 8mb agp >> videocard . >> I also downloaded the open gl beta patch. >> I run GPL on 640X480 with min details . >> Thanks a lot for the tips !! You should be getting more FPS (around 12 - 14) in software mode. If you feel confident that the videocard is set up properly, you might want to check the following: - Make sure the L2 cache is enabled. It is possible that your computer vendor disabled it, since some super socket 7 boards don't always run reliably at 100 (or 95) Mhz FSB with L2 cache enabled. If it is disabled, and the system hangs after enabling it, take the whole thing and return it to the place you bought it! - You don't say which version of Windows you have. If it's Win95b (aka OSR 2.x) or Win98, you're fine. The original Win95 doesn not have OpenGL support out of the box, though. In order for the OpenGL patch to work properly, you need a file called opengl95.exe which you can download from www.microsoft.com. Click on support, then search the knowledge base for the exact filename. You also need drivers for the 740i card which support OpenGL. Possibly, the support is included in the standard drivers, but you might want to verify this. While I agree that RAM equals engine displacement (you can never have enough of either), it is not the cause of Fabian's framerate problems. 32MB are enough for GPL to run - I had 32 and upgraded to 96MB, and it didn't make a difference in framerate. He has a K6-2, and therefore uses a motherboard with a socket 7 chipset. The BX is a slot 1 chipset. I'd recommend PC100 memory anyway. It is useful for the K6-2 300 and upwards, since they are designed to run at 100 MHz FSB (the 333 is different, though.) It's only marginally more expensive than "66MHz" memory. The Intel 740 graphics chip is a low cost 2D/3D chip. There are some known problems with VIA MVP3 based mainboards and this chip, so maybe the problem lies there (What chipset is your mainboard using, Fabian?) Getting an inexpensive VooDoo2 as a add-on card seems a good investment anyway. The K6-2 333 by default should run at 3.5 x 95MHz. It would be a good idea to set it to 3.5 x 100 = 350MHz. Much more is unlikely with that chip, unless it's a brand new model with the new core. -- Wolfgang Preiss \ E-mail copies of replies to this posting are welcome.
P Gagg 12 Dec 1998#439702
> PS i just read peter gagg's message and just a note to him, an AMD > is socket > 7, a BX mobo i believe is slot 1 (pentium 2) Hmmm, but he said he had a K6-2 333, isn't that a slot 1 cpu? I didn't think socket 7 went higher than 233? (Not my area of expertise here I freely admit!!!) 8-) *Peter* #:-)

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy