Running Voodo2 at 800x600, after what seems like about 15 to 20 minutes,
the screen freezes up, but I can still here whatever was happening
continuing to happen. If I was driving, I hear the car slow down and
crash, or if I'm watching a replay, the replay keeps playing (I can hear
the sounds), but the csreen just freezes up. Anyone got any clues about
this?
--
=========================================================
John Simmons - Redneck Techno-Biker (Zerex12)
http://www.members.home.net/jms1/index.html
John Simmons - Barbarian Diecast Collector
http://members.home.net/jsimm/diecast_index.html
If you want to send me email, go to either of the URL's
shown above & click "Send Me Mail" in the contents frame.
=========================================================
GPL should be disabling the screen saver, but just to be sure does the
time to lockup reflect the time that the screensaver is set to (i.e.
with the screensaver set to turn on after one minute does it still take
15-20min to lockup or does it occur after only one minute of driving)?
- Eric
>Well, good theory, but I'm not overclocking my Voodoo card, I'm running
>the "Blank Screen" screensaver, and I don't believe in ICQ.
>Running Voodo2 at 800x600, after what seems like about 15 to 20 minutes,
>the screen freezes up, but I can still here whatever was happening
>continuing to happen. If I was driving, I hear the car slow down and
>crash, or if I'm watching a replay, the replay keeps playing (I can hear
>the sounds), but the csreen just freezes up. Anyone got any clues about
>this?
This is overclocking of the Voodoo2. I have a Canopus Pure 3D 2 and
disappointingly suffer the same problem. I'm considering returning it since
it may be a one-off. Canopus tech support assure me I should be safe to
have the speed above the default supplied 93Mhz. I can run at 94Mhz but
more than that I start suffering the problems you describe. If you've got a
room fan, try taking off the computer case and blasting cool air onto the
voodoo 2 card to see if you can run for longer.
The other time I have seen what you describe is when online during the beta
period and somebody paged me with an ICQ message. Once you check the ICQ
configuration to not automatically pop-up messages, this went away. Also
check you're not running any unusual screensavers.
Mike.
>>Running Voodo2 at 800x600, after what seems like about 15 to 20 minutes,
>>the screen freezes up, but I can still here whatever was happening
>>continuing to happen. If I was driving, I hear the car slow down and
>>crash, or if I'm watching a replay, the replay keeps playing (I can hear
>>the sounds), but the csreen just freezes up. Anyone got any clues about
>>this?
>This is overclocking of the Voodoo2. I have a Canopus Pure 3D 2 and
>disappointingly suffer the same problem.
Well, good theory, but I'm not overclocking my Voodoo card, I'm running
the "Blank Screen" screensaver, and I don't believe in ICQ.
--
=========================================================
John Simmons - Redneck Techno-Biker (Zerex12)
http://www.members.home.net/jms1/index.html
John Simmons - Barbarian Diecast Collector
http://members.home.net/jsimm/diecast_index.html
If you want to send me email, go to either of the URL's
shown above & click "Send Me Mail" in the contents frame.
=========================================================
> The other time I have seen what you describe is when online during the beta
> period and somebody paged me with an ICQ message. Once you check the ICQ
> configuration to not automatically pop-up messages, this went away. Also
> check you're not running any unusual screensavers.
i run no screensaver at all otherwise it freezes up the GPL demo. But
the way you describe it makes it sound like only weird screensavers
do that. I was running a standard Win95 Screensaver however.
You leave ICQ running while in GPL? ouch - that's about a 3-5%
performance hit right there. ICQ is pretty lame and uses up a
ridiculous amount of CPU just to sit there. (checked many a time with
the NT4.0 task manager)
Quoted text (10 lines)
>GPL should be disabling the screen saver, but just to be sure does the >time to lockup reflect the time that the screensaver is set to (i.e. >with the screensaver set to turn on after one minute does it still take >15-20min to lockup or does it occur after only one minute of driving)? >>Well, good theory, but I'm not overclocking my Voodoo card, I'm running >>the "Blank Screen" screensaver, and I don't believe in ICQ.There are plenty of Voodoo2 overclocking utilities out there, most of
which you can also use to underclock the cards. Try this, or perhaps a
fan on the card and see if it helps. If it does, you might want to
consider returning the card since it's overheating with the default
clock speed.
- Eric
>I think the Voodoo is heating up or something. It takes about 15 to 20
>minutes for it to freeze up, but it apparently doesn't do it all the
>time.
Already have two fans on it (lasagna fans). I don't know why it would
overheat sometimes and not other times...
Maybe I should just get that Obsidian X24...
--
=========================================================
John Simmons - Redneck Techno-Biker (Zerex12)
http://www.members.home.net/jms1/index.html
John Simmons - Barbarian Diecast Collector
http://members.home.net/jsimm/diecast_index.html
If you want to send me email, go to either of the URL's
shown above & click "Send Me Mail" in the contents frame.
=========================================================
Quoted text (12 lines)
>There are plenty of Voodoo2 overclocking utilities out there, most of >which you can also use to underclock the cards. Try this, or perhaps a >fan on the card and see if it helps. If it does, you might want to >consider returning the card since it's overheating with the default >clock speed. >>I think the Voodoo is heating up or something. It takes about 15 to 20 >>minutes for it to freeze up, but it apparently doesn't do it all the >>time.Quoted text (12 lines)
> This is overclocking of the Voodoo2. I have a Canopus Pure 3D 2 and > disappointingly suffer the same problem. I'm considering returning it since > it may be a one-off. Canopus tech support assure me I should be safe to > have the speed above the default supplied 93Mhz. I can run at 94Mhz but > more than that I start suffering the problems you describe. If you've got a > room fan, try taking off the computer case and blasting cool air onto the > voodoo 2 card to see if you can run for longer. > The other time I have seen what you describe is when online during the beta > period and somebody paged me with an ICQ message. Once you check the ICQ > configuration to not automatically pop-up messages, this went away. Also > check you're not running any unusual screensavers.Glide 3.0????? I installed Glide 3 and had lockups. Went back to older reference
drivers and no probs.
--
Byron Forbes
Captain of Team Lightning Bolt
http://members.tripod.com/~HOSHUMUNGUS
and
http://www.frontiernet.net/~godsoe/bolt/home.htm
Quoted text (18 lines)
> Running Voodo2 at 800x600, after what seems like about 15 to 20 minutes, > the screen freezes up, but I can still here whatever was happening > continuing to happen. If I was driving, I hear the car slow down and > crash, or if I'm watching a replay, the replay keeps playing (I can hear > the sounds), but the csreen just freezes up. Anyone got any clues about > this? > -- > ========================================================= > John Simmons - Redneck Techno-Biker (Zerex12) > http://www.members.home.net/jms1/index.html > John Simmons - Barbarian Diecast Collector > http://members.home.net/jsimm/diecast_index.html > If you want to send me email, go to either of the URL's > shown above & click "Send Me Mail" in the contents frame. > =========================================================I have a Pure3d2 and am experiencing the same thing.
Two things, from the posts in this thread, it seems obvious that its a
Canopus issue. It doesn't even seem to be limited to the Pure 3D2 in that at
least one guy with a regular Pure3d had something similar happen.
I've found a potential workaround: I reduced the clock to 90mhz in the
Pure3d II tab. Before doing this, I would lock up after just a few laps. Now
I can play for over an hour and have yet to experience the lockup again.
Post if it works for you too.
Quoted text (18 lines)
>Running Voodo2 at 800x600, after what seems like about 15 to 20 minutes, >the screen freezes up, but I can still here whatever was happening >continuing to happen. If I was driving, I hear the car slow down and >crash, or if I'm watching a replay, the replay keeps playing (I can hear >the sounds), but the csreen just freezes up. Anyone got any clues about >this? >-- >========================================================= >John Simmons - Redneck Techno-Biker (Zerex12) >http://www.members.home.net/jms1/index.html >John Simmons - Barbarian Diecast Collector >http://members.home.net/jsimm/diecast_index.html >If you want to send me email, go to either of the URL's >shown above & click "Send Me Mail" in the contents frame. >=========================================================% Glide 3.0????? I installed Glide 3 and had lockups. Went back to older reference
% drivers and no probs.
Hmmmm.... I upgraded to the latest "reference" drivers just before
installing GPL and don't have any problems. Though it is interesting
that when I check "system info" I get the following:
WinGlide 2.x Driver Version 2.53
.....
WinGlide 3.x Driver Version 3.00
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
