I know it has been said before but GPL is really hard. At novice setting
I have a tough time staying on the track. Never mid even trying to keep
up with the other cars. I find that even on the straights I can at best
only keep up with them. I would have assumed that at novice setting I
might have a little more power. Any suggestions? I like the fact that it
is hard but I think it may be so hard that I'm not sure I'll ever get
good enough to even be competitive.
Vamp
GPL is hard: tips and the throttle-brake axis debate
A player found GPL very hard even on novice. Jim Sokolov said smooth inputs and less throttle were key, and others advised practice, starting slowly, lighter fuel loads and Alison Hine's tip of starting in the 200hp trainer cars. A long side debate covered why separate throttle and brake axes matter, since a combined axis cannot register both pedals at once.
Automated summary.
Agreed . I am even thinking about getting a wheel for this
sim. Never needed one with the Indycar , Narcar for f1rs series. I
wonder if it would make this any easier?
Quoted text (9 lines)
>I know it has been said before but GPL is really hard. At novice setting >I have a tough time staying on the track. Never mid even trying to keep >up with the other cars. I find that even on the straights I can at best >only keep up with them. I would have assumed that at novice setting I >might have a little more power. Any suggestions? I like the fact that it >is hard but I think it may be so hard that I'm not sure I'll ever get >good enough to even be competitive. >Vamp> I know it has been said before but GPL is really hard. At novice
> setting I have a tough time staying on the track. Never mid even
> trying to keep up with the other cars. I find that even on the
> straights I can at best only keep up with them. I would have assumed
> that at novice setting I might have a little more power. Any
> suggestions?
What you probably need is LESS power. :-) This is not a
full-throttle/no-throttle game; smooth control inputs (and often,
using less than full power) is the order of the day.
---Jim
> I know it has been said before but GPL is really hard. At novice
> setting I have a tough time staying on the track. Never mid even
> trying to keep up with the other cars. I find that even on the
> straights I can at best only keep up with them. I would have
> assumed that at novice setting I might have a little more power.
> Any suggestions?
1) Practice.
2) If you don't already have one get a wheel and pedal set-up.
3) Practice some more.
4) Memorise the circuits by heart so you know whats coming
(anticipation).
5) Practice some more.
6) Start off slowly and gradually build up your speed, not the other
way around.
7) Practice some more.
8) Memorise how the car reacts, so you know what to expect when you
brake, turn, etc.
9) Practice some more.
10) Watch other peoples replays, you can learn a lot from these?
11) Practice some more.
12) Read the manual, this can usually help, its surprising how many
people don't bother to read this important document!
13) Finally, did I mention practice?
8-)
*Peter* 8-)
(NB: remove asterix to e-mail)
That's an interesting one. I've wondered sometimes if it's better
to start off fast and work on consistency, or start consistent and
work on speed. Would you mind explaining the advantage of the
latter?
rob.
<snip>
Quoted text (9 lines)
>I know it has been said before but GPL is really hard. At novice setting >I have a tough time staying on the track. Never mid even trying to keep >up with the other cars. I find that even on the straights I can at best >only keep up with them. I would have assumed that at novice setting I >might have a little more power. Any suggestions? I like the fact that it >is hard but I think it may be so hard that I'm not sure I'll ever get >good enough to even be competitive. >Vamp><snip>
er, you didn't emphasise practice enough! So i'll continue the list
for you :)
14) Practice!
15) Practice!
16) Practice!
.
.
.
22843) Practice!
.
.
.
ad infinitum
Yeah, it's hard!! That's what I like about it! I don't have the final yet
(heading to Elbo tomorrow) but I've been playing the CGW demo for a while now.
The thing to remember is the game simulates technology that's 30+ years old.
No wings, no aerodynamics, no ground-effects packages to keep you stuck to the
track in the curves. Plus you're racing on narrow, high-profile treaded tires
that have more in common with the tires on your family car than those on a
modern race car.
From what I've found running practice laps in the demo, you gotta pretend
you've got eggs strapped on the pedals. Smooth & easy does it. Just a little
too much throttle coming out of a turn & I'm doing 360's down the track! Same
thing if I'm braking too long into a turn, I'll spin off every time.
So, learn the tracks inside out, have all your moves thought out before you
make them, and do everything SMOOTHLY. Jerkiness or suddenness will get you in
trouble. Don't worry if you lose. You'll lose a lot. Then, if you keep at it
you'll start winning. And winning. And winning.
Lee
Umm, you don't spend as much time admiring the track from the sandtraps?
> That's an interesting one. I've wondered sometimes if it's better
> to start off fast and work on consistency, or start consistent and
> work on speed. Would you mind explaining the advantage of the
> latter?
> rob.
You all forgot the most impotant issue, HAVE FUN!!!!!!
Don't be bothered by the fact that you can't win the first 5, 10, 50,
etc.(?) races. Just be proud if you break your personal record. Even if
that just means you made it to the second lap.
// Johan
Quoted text (16 lines)
> ><snip> > er, you didn't emphasise practice enough! So i'll continue the list > for you :) > 14) Practice! > 15) Practice! > 16) Practice! > . > . > . > 22843) Practice! > . > . > . > ad infinitum>You all forgot the most impotant issue, HAVE FUN!!!!!!
Hmmmmm.......:-\ What's wrong here?
Remco
heheh, talk about a BAD typo :-)
>>You all forgot the most impotant issue, HAVE FUN!!!!!!
>Hmmmmm.......:-\ What's wrong here?
>Remco
% Agreed . I am even thinking about getting a wheel for this
% sim. Never needed one with the Indycar , Narcar for f1rs series. I
% wonder if it would make this any easier?
Actually what is more important than the "wheel" are analog pedals. If
you are trying to "drive" GPL with digital (on/off) breake and
accelerator, you are indeed in for a long haul. While you are at it
look for pedal setup that will allow for the brake and accelerater to be
on separate axes.
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
Quoted text (15 lines)
>% Agreed . I am even thinking about getting a wheel for this >% sim. Never needed one with the Indycar , Narcar for f1rs series. I >% wonder if it would make this any easier? >Actually what is more important than the "wheel" are analog pedals. If >you are trying to "drive" GPL with digital (on/off) breake and >accelerator, you are indeed in for a long haul. While you are at it >look for pedal setup that will allow for the brake and accelerater to be >on separate axes. >-- >**************************** Michael E. Carver ************************* > Upside out, or inside down...False alarm the only game in town. >=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=Most people get a new racing game/sim and jump straight in with both
feet and immediately try to break all known lap records at the first
attempt without even glancing at the manual!!!!
This usually results in lots of unscheduled *off-road* driving
admiring the scenery when you should in fact be on the track
practicing. This is caused because the drivers have not learnt how to
control the car, not learnt the circuits, and they are driving *TOO
FAST* and end up continually crashing. This in turn dents confidence,
and can get very annoying? and you do not learn that much from
continually crashing (apart from where the barriers are situated?
and how slow it is to get out of the gravel trap?)
The more conservative approach (driving slower and gradually building
up speed) will ultimately be more beneficial (IMHO?) because of many
reasons...
1) Driving slower gives you more time to react.
2) You can see & learn the correct racing line easier at lower
speeds.
3) Car control is easier at lower speeds.
4) You will crash less at lower speeds.
5) If you crash less your confidence will rise.
6) Remembering circuits is easier at lower speeds.
My method for a new game/sim is to take a few laps to just drive
around the circuit, not fast at all, to familiarise myself with the
general layout. (Also check out any maps or diagrams in the manual,
etc).
Then try some faster laps, but the object is to just try and stay on
the track without spinning/crashing off. Once I can do this
consistently (I have learnt to anticipate the corners and bends) I
start to gradually increase speed and try to lower my laptimes, but
the emphasis is on gradually.
As you gradually drive more laps, you get more familiar with the
circuit, and can anticipate better, try to go faster on the straights
on each lap by accelerating out of corners earlier. also try to brake
into corners a little bit later on each lap. Each lap you are only
trying to improve on the last one (even if it is only by 1/100th of a
second) and not trying for an out and out record. Although,
obviously, if you drive an outstanding lap, then that is a bonus!
As the laps count off, you will find the best braking points, the
best gear change points, and the correct line for the circuit. You
will also be learning about the car, how it brakes, how it
accelerates, how it slides, how the wheels lock up, etc. Because you
are doing it gradually, you are learning that little bit extra on
each lap, feeling for the limit of the car, the braking limits, the
traction limits, etc.
I find using this method, after about 20 - 25 laps of pretty much any
circuit, in any game/sim, that I have learnt enough about the car and
circuit to drive a fairly competitive lap? This means after say about
half an hour to an hour I can be pretty quick and fairly consistent.
Whereas, the guy that just jumps in feet first and drives hell for
leather (unless he is *very* talented?) ends up spending the first
half an hour to an hour spinning all over the place, crashing out,
smashing into things, *AND* at the end of it all, he knows *** all
about the cars limit or the layout of the circuit, cos he has spent
more time off the circuit than the marshals!!!
8-)
*Peter* 8-)
(NB: remove asterix to e-mail)
>From what I've found running practice laps in the demo, you gotta pretend
>you've got eggs strapped on the pedals. Smooth & easy does it. Just a little
>too much throttle coming out of a turn & I'm doing 360's down the track! Same
>thing if I'm braking too long into a turn, I'll spin off every time.
Get back on the power into the corner after, or even perhaps during
braking. Hence the need for separate axis pedals so that you can
balance the car more. It feels, to me at least, that the car is under
far greater control under power than braking into the corner.
Unfortunately I've only got the demo so far...
Stuart
--
Stuart Booth
Somewhere in Buckinghamshire, England, UK
Note: My email address is in disguise! Remove trailing Z
This advice from Peter Gagg is terrific. The only thing I would add is
to start out in the Advanced Trainer, rather than the Grand Prix car.
The AT cars all have 200 hp, vs about 400 hp for most of the GP cars.
This makes it much easier to learn to control the cars; they are not
quite so ready to leap at the scenery at the slightest touch of
throttle. Also, in terms of overall lap times, the Advanced Trainers
are not too much slower than the GP cars; I've done a few laps in the
1:32 range at Zandvoort, for example. I found that when I was learning
to drive in GPL, if I did a few laps (maybe 50 or so) in an AT, then I
did much better in the GP car.
Don't feel like a wimp if you choose to race the AT's for a while. With
their size and weight, the ATs are roughly comparable to the full-house
1.5 liter GP cars of 1961 through 1965, and not much different from the
cars derived from the 1.5 liter cars which many of the teams used as
interim cars in 1966 and early 1967.
It is possible to race against the AI with the Trainers if you change a
single character in your player.ini file. See the general FAQ on my GPL
site for details:
http://www.simracing.com/~alison/gpl/ [address restored]
One other point which may not have been emphasized in this thread quite
enough: you need to practice a lot. <Very Big Grin>
I drove more than 500 laps at Monza before I felt I really was
competitive there, and Monza is the simplest track. And I'm still
learning. Although I know all the tracks fairly well by now, I find
that I need about 200 laps at most circuits to get down to reasonable
times, if I've been away from that circuit for more than a week or two.
Yeah, I guess I agree with the title of this thread. :-)
Alison
Alison
Remove the spam blocker NOSPAM to email me.
[link lost in import: /,ultranet.com/~alison]
Quoted text (77 lines)
>> That's an interesting one. I've wondered sometimes if it's better >> to start off fast and work on consistency, or start consistent and >> work on speed. Would you mind explaining the advantage of the >> latter? >> >6) Start off slowly and gradually build up your speed, not the >> other >> >way around. >Most people get a new racing game/sim and jump straight in with both >feet and immediately try to break all known lap records at the first >attempt without even glancing at the manual!!!! >This usually results in lots of unscheduled *off-road* driving >admiring the scenery when you should in fact be on the track >practicing. This is caused because the drivers have not learnt how to >control the car, not learnt the circuits, and they are driving *TOO >FAST* and end up continually crashing. This in turn dents confidence, >and can get very annoying? and you do not learn that much from >continually crashing (apart from where the barriers are situated? >and how slow it is to get out of the gravel trap?) >The more conservative approach (driving slower and gradually building >up speed) will ultimately be more beneficial (IMHO?) because of many >reasons... >1) Driving slower gives you more time to react. >2) You can see & learn the correct racing line easier at lower >speeds. >3) Car control is easier at lower speeds. >4) You will crash less at lower speeds. >5) If you crash less your confidence will rise. >6) Remembering circuits is easier at lower speeds. >My method for a new game/sim is to take a few laps to just drive >around the circuit, not fast at all, to familiarise myself with the >general layout. (Also check out any maps or diagrams in the manual, >etc). >Then try some faster laps, but the object is to just try and stay on >the track without spinning/crashing off. Once I can do this >consistently (I have learnt to anticipate the corners and bends) I >start to gradually increase speed and try to lower my laptimes, but >the emphasis is on gradually. >As you gradually drive more laps, you get more familiar with the >circuit, and can anticipate better, try to go faster on the straights >on each lap by accelerating out of corners earlier. also try to brake >into corners a little bit later on each lap. Each lap you are only >trying to improve on the last one (even if it is only by 1/100th of a >second) and not trying for an out and out record. Although, >obviously, if you drive an outstanding lap, then that is a bonus! >As the laps count off, you will find the best braking points, the >best gear change points, and the correct line for the circuit. You >will also be learning about the car, how it brakes, how it >accelerates, how it slides, how the wheels lock up, etc. Because you >are doing it gradually, you are learning that little bit extra on >each lap, feeling for the limit of the car, the braking limits, the >traction limits, etc. >I find using this method, after about 20 - 25 laps of pretty much any >circuit, in any game/sim, that I have learnt enough about the car and >circuit to drive a fairly competitive lap? This means after say about >half an hour to an hour I can be pretty quick and fairly consistent. >Whereas, the guy that just jumps in feet first and drives hell for >leather (unless he is *very* talented?) ends up spending the first >half an hour to an hour spinning all over the place, crashing out, >smashing into things, *AND* at the end of it all, he knows *** all >about the cars limit or the layout of the circuit, cos he has spent >more time off the circuit than the marshals!!! >8-) >*Peter* 8-) >(NB: remove asterix to e-mail)% >% Agreed . I am even thinking about getting a wheel for this
% >% sim. Never needed one with the Indycar , Narcar for f1rs series. I
% >% wonder if it would make this any easier?
% >
% >Actually what is more important than the "wheel" are analog pedals. If
% >you are trying to "drive" GPL with digital (on/off) breake and
Did I actually type this ^^^^^ ? ECCK!
% >accelerator, you are indeed in for a long haul. While you are at it
% >look for pedal setup that will allow for the brake and accelerater to be
% >on separate axes.
% >
% You mean gas & breaks via keyboard? <gasp> I'm using my Thrustmaster Elite
% rudder pedals (I'm also a flightsim freak) which are digital I believe,
% they do
% quite nicely. And the Thrustmaster joystick for steering tho I'm a *little*
% less satisfied with that.
% I've got an ancient Thrustmaster Formula T1 wheel & pedals but I haven't
% use it
% yet, I hate the pedals. They're too stiff for me, they've got these big
% rollers your feet go on which I don't like, & they're too close together. With
% a foot on the gas & one over the brakes my knees bang together :(
% What I'd *like* to do is hook up my Thrustmaster wheel to my Thrustmaster
% rudder pedals. But I bet that won't work. Anyone know if that could be made to
% work?
First you can move the brake pedal/roller over to the far left hand slot
with no problem. Second, I found that wearing heavy soled shoes helped
alot with the T1 roller/pedals (Marcis wing-tips?).
What axes are the rudder pedals on? If they aren't on X1, they should
work with the T1 wheel.
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
Passing in this game is often best accomplished at the turns, not in the
straights. Just watch F1 on TV .. you'll get the idea
Quoted text (9 lines)
>I know it has been said before but GPL is really hard. At novice setting >I have a tough time staying on the track. Never mid even trying to keep >up with the other cars. I find that even on the straights I can at best >only keep up with them. I would have assumed that at novice setting I >might have a little more power. Any suggestions? I like the fact that it >is hard but I think it may be so hard that I'm not sure I'll ever get >good enough to even be competitive. >VampQuoted text (11 lines)
> The more conservative approach (driving slower and gradually building > up speed) will ultimately be more beneficial (IMHO?) because of many > reasons... > 1) Driving slower gives you more time to react. > 2) You can see & learn the correct racing line easier at lower > speeds. > 3) Car control is easier at lower speeds. > 4) You will crash less at lower speeds. > 5) If you crash less your confidence will rise. > 6) Remembering circuits is easier at lower speeds.% > The more conservative approach (driving slower and gradually building
% > up speed) will ultimately be more beneficial (IMHO?) because of many
% > reasons...
% >
% > 1) Driving slower gives you more time to react.
% > 2) You can see & learn the correct racing line easier at lower
% > speeds.
% > 3) Car control is easier at lower speeds.
% > 4) You will crash less at lower speeds.
% > 5) If you crash less your confidence will rise.
% > 6) Remembering circuits is easier at lower speeds.
% 7) Starting slow keeps you on the track so you can string together
% consecutive laps which leads to a rhythm and the necessary timing to
% drive consistently near the limits of the car and your ability.
% Oh, and practice, practice, practice.
8) Starting off slow and smooth vs. fast and wreakless also helps
prevent learning "bad habits" which may get in the way of really being
fast further down your career.
And yes, practice, practice, practice. While I am on this important
aspect... It's best to take your learning "curve" one turn at a time.
Concentrate on attacking one turn until you get it down and then work
on the next turn. Sorta like putting a puzzle together, when the last
piece locks into place!
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
Quoted text (12 lines)
>First you can move the brake pedal/roller over to the far left hand slot >with no problem. Second, I found that wearing heavy soled shoes helped >alot with the T1 roller/pedals (Marcis wing-tips?). >What axes are the rudder pedals on? If they aren't on X1, they should >work with the T1 wheel. >-- >**************************** Michael E. Carver ************************* > Upside out, or inside down...False alarm the only game in town. >=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=[This followup was posted to rec.autos.simulators and a copy was sent to
the cited author.]
So have you got any recommendations to what wheel to buy? Keeping in
mind value for money.
The other problem I've got is justifying the purchase of a wheel to my
wife. She is not a petrol head like me.
--
Rob Yates
Found in the Land of OZ
http://users.netcon.net.au/ryates/index.htm
% So have you got any recommendations to what wheel to buy? Keeping in
% mind value for money.
I think the main criteria should be pedals on a separate axes. For
starters (and probabily the cheapest -- unless you make your own), the
NASCAR Pro by Thrustmaster is the entry level that I am aware of for
separate axes pedals. And this IS needed for controlling the car in
GPL. When the pedals are on the same axis, letting off the gas is the
same as touching the brake. For more information check
http://www.thrustmaster.com
Thrustmaster is selling the NASCAR Pro for $99.95
<http://st1.yahoo.com/thrust>, so you may find it out there in the
discount stores for even less.
If you think you might need to build your own check out Wally's World
<http://www.oz.net/~wottenad/wheel.htm>
% The other problem I've got is justifying the purchase of a wheel to my
% wife. She is not a petrol head like me.
Well, we may just have to do the "honey, look how much I would be
saving" routine (they love to do it, so turn about is fair play <G>).
Show her the top of the line goodies and tell her how they cost:
o Thomas Enterprises ($220-725)
http://soli.inav.net/~thomas/index.html
o Virtual Vehicles from Interactive I/O ($695-1295)
http://www.interactiveio.com
o Extreme Competition Controls ($995-1299)
http://ourworld.compuserve.com/homepages/extreme
Then promise to buy her something special with the money you save!
% > Actually what is more important than the "wheel" are analog pedals. If
% > you are trying to "drive" GPL with digital (on/off) breake and
% > accelerator, you are indeed in for a long haul. While you are at it
% > look for pedal setup that will allow for the brake and accelerater to be
% > on separate axes.
% >
% --
% Rob Yates
% Found in the Land of OZ
% http://users.netcon.net.au/ryates/index.htm
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
BZZZZT! Wrong answer. Letting off the gas is letting off the gas, not
pressing the brake. Pressing on the gas and brake simultaneously is
where the problem is...holding the gas then pressing the brake reduces
the amount of gas, and the reverse is true. To get full throttle,
you cannot have any brake input, and vice versa.
I just added a 2/3 axis switch to my TSW, and I have to learn to drive
GPL all over again.
--
Neil Yeatman
Ajax, Ontario, CANADA
On Tue, 06 Oct 1998 06:30:09 -0400, Neil Yeatman
>BZZZZT! Wrong answer. Letting off the gas is letting off the gas, not
>pressing the brake. Pressing on the gas and brake simultaneously is
>where the problem is...holding the gas then pressing the brake reduces
>the amount of gas, and the reverse is true. To get full throttle,
>you cannot have any brake input, and vice versa.
AFAI understand Michael is/was right.
As long as gas/brake are on one axis then while on half throttle you
get exactly the same effect if by the sae amount you lift the throttle
or depress the brake. Essentially you just change the level of
throttle reported to the sim by that axis.
If the gas/brake are separated onto different axes then it becomes a
different picture.
Cheers!
John
Quoted text (7 lines)
>As long as gas/brake are on one axis then while on half throttle you >get exactly the same effect if by the sae amount you lift the throttle >or depress the brake. Essentially you just change the level of >throttle reported to the sim by that axis. >If the gas/brake are separated onto different axes then it becomes a >different picture.You could point out much *** you'll be saving on the family grocery
getter by doing your four-wheel-drifts on the computer. :-)
Marty
Yes, and the point here is that with separate gas/brake you can use both
at once for car control in certain situations.
Marty
Quoted text (24 lines)
> On Tue, 06 Oct 1998 06:30:09 -0400, Neil Yeatman > >BZZZZT! Wrong answer. Letting off the gas is letting off the gas, > not > >pressing the brake. Pressing on the gas and brake simultaneously is > >where the problem is...holding the gas then pressing the brake > reduces > >the amount of gas, and the reverse is true. To get full throttle, > >you cannot have any brake input, and vice versa. > AFAI understand Michael is/was right. > As long as gas/brake are on one axis then while on half throttle you > get exactly the same effect if by the sae amount you lift the throttle > or depress the brake. Essentially you just change the level of > throttle reported to the sim by that axis. > If the gas/brake are separated onto different axes then it becomes a > different picture. > Cheers! > JohnHow you can separate gas/brake?
Quoted text (8 lines)
> On Tue, 06 Oct 1998 06:30:09 -0400, Neil Yeatman > AFAI understand Michael is/was right. > As long as gas/brake are on one axis then while on half throttle you > get exactly the same effect if by the sae amount you lift the throttle > or depress the brake. Essentially you just change the level of > throttle reported to the sim by that axis.Does the T2 have seperate axes?
Joe
It's pretty simple really since there's nothing GPL can do. Let's say
you have gas at "10" (to pick an arbitrary number). That is the _only_
piece of information your gameport can give since it is simply a
measure of the changing resistance delivered from the gas and brake
pots. If that number now changes to "8", GPL has no idea if I lifted
off the gas by "2" or I depressed the brake by "2". Whichever I do the
effect is the same within GPL or indeed any sim.
Only with separated gas and brake will you get added benefits (where
the game models and supports it).
Cheers!
John
>Under that logic then a joystick works by everything being either left or
>down and the right or up motions just dampen the that input.
>Wrong.
It's not wrong - please tell me how you can apply a left AND a right
force simultaneously on a joystick? That is what we are discussing....
Cheers!
John
Quoted text (18 lines)
>> I would assume that with a single axis set-up in GPL, the sim does >>not allow simultaneous inputs on both controls: so long as you are on >>the gas, you can't apply the brake, and vice versa. I doubt that the >>game compensates and "dumbs down" the inputs (mixing gas/brake) if you >>are on a single axis. (So I'd tend to agree with Neil on that point.) >>Using a single axis would put you at a great disadvantage, I would >>think. >It's pretty simple really since there's nothing GPL can do. Let's say >you have gas at "10" (to pick an arbitrary number). That is the _only_ >piece of information your gameport can give since it is simply a >measure of the changing resistance delivered from the gas and brake >pots. If that number now changes to "8", GPL has no idea if I lifted >off the gas by "2" or I depressed the brake by "2". Whichever I do the >effect is the same within GPL or indeed any sim. >Only with separated gas and brake will you get added benefits (where >the game models and supports it).(some irrelevant/inaccurate information snipped)
Not true. It is different in that, while on separate joystick axes,
throttle and brake inputs can be made at the same time - which is
almost a necessity in GPL.
--
Pat Dotson
IMPACT Motorsports
http://www.impactmotorsports.com/pd.html
% Does the T2 have seperate axes?
No it doesn't, but it shouldn't be too hard to rewire it so that it does
(assuming that TM has all of the wires available in their cable). The
hard part would be to make it switchable (though not that much harder).
This was discussed awhile back by a few folks. Did anyone ever do it
successfully and would you be so kind as to share your method?
Also one of the TM support people offered to see if he could dig up a
wiring diagram for us. I'll see if I can dig up their address and
"pester" him again.
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
> Yep! I agree...Neil reacted without thinking.
Nope...I responded from experience.
What we are discussing is Michael's original comment, "letting off the
gas is the same as touching the brake", which I disagree with. When you
let off the gas halfway, you are *not* applying the brakes...you're
applying 50% gas.
In any joystick calibration routine on a 2-axis setup, pushing the gas
all the way down shows 100% on the "gas" side of centre. Pushing the
brake halfway in at the same time reduces the gas by 50%, and the net
result is 50% gas..no brakes. Pushing the brake all the way zeroes it
out.
So...100% gas + 100% brake = Zero. The reverse is true if you push the
brake fully and then apply gas pedal.
Not until the pointer crosses over to the braking side of centre is
brake being applied - unless GPL is interpreting this differently, which
I don't believe it does. Whichever input goes in first is the one that
then is counteracted by the other pedal.
All of the above assumes that your pots apply the same amount of
resistance, of course.
--
Neil Yeatman
Ajax, Ontario, CANADA
> Does the T2 have seperate axes?
It depends on how old your T2 is. The original T2's came wired as a 3
axis joystick. They supplied an adapter to make it a 2 axis stick. At
some point however they changed it to work as a 2 axis stick only, and
stopped shipping the adapter.
--
Neil Yeatman
Ajax, Ontario, CANADA
says...
Why not quote the part I was quoting, so you don't take my comments out
of context...
Let's back up a bit and get the -whole- picture
---
The person I was quoting was under the impression that on a single axes
pedal system the only input being sent to the sim is throttle. This isn't
true. The sim "sees" separate brake and gas inputs. Brake force is -256
to -1 and gas is 1 to 256. 0 is neutral.
Yes, a two axes system allows for separate brake and gas inputs
simultaneously. I didn't really clarify that in my original post. I was
more concentrated on the fact that dual axes gives finer control
But, from my own experiences I don't see dual axes pedals as an absolute
necessity for GPL. It's probably slightly advantagous, but you can drive
the sim perfectly well with a single axis pedal system. I do just fine
with my CH Products EXL-500.
>Does the T2 have seperate axes?
No. The Thrustmaster "Nascar" (or "F1") wheel does, however. It is
possible to rewire the T2 pedals. Unfortunately, Thrustmaster choose
not to have spare wires in the cable that leads to the gameport, so
you have to either add a wire or replace the cable. That's why I
haven't done this yet.
--
Wolfgang Preiss \ E-mail copies of replies to this posting are welcome.
%
% > Yep! I agree...Neil reacted without thinking.
% Nope...I responded from experience.
% What we are discussing is Michael's original comment, "letting off the
% gas is the same as touching the brake", which I disagree with. When you
% let off the gas halfway, you are *not* applying the brakes...you're
% applying 50% gas.
% In any joystick calibration routine on a 2-axis setup, pushing the gas
% all the way down shows 100% on the "gas" side of centre. Pushing the
% brake halfway in at the same time reduces the gas by 50%, and the net
% result is 50% gas..no brakes. Pushing the brake all the way zeroes it
% out.
Yes, looking at the "calibration" screen or TMScope, but I don't think
that the sim makers actually model it this way. I know that in Papyrus
sims, the car handles differently with separate axes than an single
axis. It is evident in the way the car noses down when there is a
sudden lift of the accelerator (ICRII & N2). It acts the same way when
the brake is being applied. When I switched to pedals on seperate axes
this behavior was greatly lessened. While the nose still dipped (as it
should, since sudden deceleration will transfer the weight to the front
wheels), it wasn't as pronounced. I also experienced greater control
over subtle throttle changes.
But, you are correct in saying that separate axes are more prominent
while applying both brake and throttle (e.g., trail-braking). Which I
haven't spent too much time playing with in GPL. I mainly either brake
or accelerate. Maybe it's just my imagination, but I sense a finer
control when they are on a separate axix.
% So...100% gas + 100% brake = Zero. The reverse is true if you push the
% brake fully and then apply gas pedal.
% Not until the pointer crosses over to the braking side of centre is
% brake being applied - unless GPL is interpreting this differently, which
% I don't believe it does. Whichever input goes in first is the one that
% then is counteracted by the other pedal.
% All of the above assumes that your pots apply the same amount of
% resistance, of course.
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
% > Does the T2 have seperate axes?
% It depends on how old your T2 is. The original T2's came wired as a 3
% axis joystick. They supplied an adapter to make it a 2 axis stick. At
% some point however they changed it to work as a 2 axis stick only, and
% stopped shipping the adapter.
Well sorta. . . The T1's and early T2's had the wheel on one joystick
1 and both pedals on joystick 2. Many Windows games couldn't cope with
this and thus the adapter/converter to put both devices on the same
joystick. The pedals were always on the same axis (be it joystick1 or
joystick2).
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
> > Does the T2 have seperate axes?
> It depends on how old your T2 is. The original T2's came wired as a 3
> axis joystick. They supplied an adapter to make it a 2 axis stick. At
> some point however they changed it to work as a 2 axis stick only, and
> stopped shipping the adapter.
Well...this is incorrect. It was a 2-axis 2 joytick setup without the
adapter. My apologies...it's been too long since I had that T2.
--
Neil Yeatman
Ajax, Ontario, CANADA
On Tue, 06 Oct 1998 23:46:24 -0400, Neil Yeatman
>What we are discussing is Michael's original comment, "letting off the
>gas is the same as touching the brake", which I disagree with. When you
>let off the gas halfway, you are *not* applying the brakes...you're
>applying 50% gas.
Yes, but it is the _same_ as applying the brake given that you are
using a single axis for both brake and gas. Psychologically it may be
considered different but in terms of information passed from the pots
to the joystick port to the sim there is no difference.
Taking the example above, if I am at 100% throttle and want 50%
throttle I can either lift the throttle halfway or I can depress the
brake halfway - on a single axis this brings the same result and
agrees with what Michael originally stated.
As far as I can see we are arguing the same thing, only you think
Michael was wrong and I don't! Spooky :-)
Cheers!
John
>The person I was quoting was under the impression that on a single axes
>pedal system the only input being sent to the sim is throttle. This isn't
>true. The sim "sees" separate brake and gas inputs. Brake force is -256
>to -1 and gas is 1 to 256. 0 is neutral.
I think we are talking about the same thing from a different
perspective. The point I was making was related to what the original
post said - reducing throttle is the same as applying brake. It is,
provided you still have the throttle depressed and are on the same
axis.
Agreed.
To drive fast and consistently you need to be smooth. The problem with
sing axis is that in order to get fully on the brakes you have to jump
fully _off_ the gas - instantaneously. So you get weight massively
pitched forward, huge engine braking, AND full braking force the same
time. In a real racecar setup to be driven on the limit that would set
up massive forces on the car that smoothly decreasing throttle and
applying brake does not do. The comment was made about Schumacher that
he often _sounds_ like he takes corners flat but is actually braking
against full throttle - often massively so. That plays hell with brake
wear of course, but his laptimes show what it does for car stability
and finesse of control. The question then becomes how well are these
effects modelled? Of course sims don't model the increased downforce
from hot exhaust gas venting under the car, but the improved pitch
control will help.
Cheers!
John
Thanks, but I'll probably just get a Nascar Pro. My T2 is getting
pretty old anyway (the calibration seems to "slip", even though I have
fairly new pots).
Joe
Thanks for answering my question before I posted it! I have a T2
with the adapter. When GPL came out, I thought, "hey! I'll just
remove the adapter and have the gas and brake on separate axes!" This
did not work even remotely as planned and now I know why.
Poop. Maybe if someone knows exactly how to rewire this thing and
could explain it to non-electrical-heads like myself...
--Keith
"Coming in 2nd place just means that you are the first to lose!"
% >Well sorta. . . The T1's and early T2's had the wheel on one joystick
% >1 and both pedals on joystick 2. Many Windows games couldn't cope with
% >this and thus the adapter/converter to put both devices on the same
% >joystick. The pedals were always on the same axis (be it joystick1 or
% >joystick2).
% Thanks for answering my question before I posted it! I have a T2
% with the adapter. When GPL came out, I thought, "hey! I'll just
% remove the adapter and have the gas and brake on separate axes!" This
% did not work even remotely as planned and now I know why.
% Poop. Maybe if someone knows exactly how to rewire this thing and
% could explain it to non-electrical-heads like myself...
You can find a wiring schematic at
http://www.monmouth.com/~lw4750/home.htm
Look of the thread "Seperate axis on a T2? (long)" here in r.a.s. and
read the reply by jsilva (LavaBoy) for information on how to...
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
Really? I do MUCH better with just socks...
________
Eldred Pickett
e-mail address altered to deter spammers - remove the '*' to reply
Put your message in a modem - and throw it into the ***-sea...


































