I am wanting to upgrade my system mainly getting ready for all the Racing
sims coming out N3, GPL, and others. What we be a good motherboard to use. I
would like it to at least be able to except P2 chips up over 450 for future
upgrades. I plan to start with a 400mhz chip, and I would like a 100mhz bx
board
Thanks
Mj
There's some very good info on motherboards and chips at
http://www.tomshardware.com/
--
Don Burnette
Palmetto Racing
Dburn on Ten
AOLL Iroc Series Administrator
http://pages.southtech.net/palmetto/aoll.htm
>I am wanting to upgrade my system mainly getting ready for all the Racing
>sims coming out N3, GPL, and others. What we be a good motherboard to use.
I
>would like it to at least be able to except P2 chips up over 450 for future
>upgrades. I plan to start with a 400mhz chip, and I would like a 100mhz bx
>board
>Thanks
>Mj
Go to the following link to see what Tom says. I went with the P2B from
ASUS. It costs about 170 bucks. His top 10 are all very good. Stay away
from Gigabyte.
http://www.tomshardware.com/mainboard.html
>I am wanting to upgrade my system mainly getting ready for all the Racing
>sims coming out N3, GPL, and others. What we be a good motherboard to use. I
>would like it to at least be able to except P2 chips up over 450 for future
>upgrades. I plan to start with a 400mhz chip, and I would like a 100mhz bx
>board
>Thanks
>Mj
Just make sure it has AGP for awesome graphics.
Get an Abit BH6, all the features of the BX6 but with 5 PCI slots and a
price of $100-110. This is the best price/performace of any MB.
Its also a great overclocking MB.
Also any chip above 450Mhz from Intel will probably need a chipset other
then a BX, Intel's next chip will be the Katami and will probably use a
different chipset, probably JX. So dont expect to get anything higher then a
450 on a BX, unless you overclock.
Arthur
s t e a l t h
r a c i n g
http://www.***sys.com/stealthracing.html
>I am wanting to upgrade my system mainly getting ready for all the Racing
>sims coming out N3, GPL, and others. What we be a good motherboard to use. I
>would like it to at least be able to except P2 chips up over 450 for future
>upgrades. I plan to start with a 400mhz chip, and I would like a 100mhz bx
>board
>Thanks
>Mj
Just curious. Whats wrong with Gigabyte boards?
Jeff
