Race Sim Central
Rec.Autos.Simulators Archive

ICR2/CART blankscreen

6 posts by 3 people · 26 Mar 1998 - 29 Mar 1998

Dave Henrie 26 Mar 1998#401485
Ok here's a new one for me. I was running a 15 lap race at Bullrun. converted from N2 for ICR2. Using the V2k_icr2 fixes I have the 3d version running in dma mode and running pretty smooth. Mirrors are clean etc. I did about 11 laps...spun from the lead to 11th, got back up to 5th and was challenging 4th when the screen just when black. the game was still running as I soon heard my car crash into a wall. I was running from dos7 from a dual boot, everything looked fine for about 45 minutes of testing etc and then blanko! is this that screen refresh thing I've read about or just another gremlin?? dave henrie ps hit reset, rebooted and everything was fine...and this is an old monitor. pre-win95
Quoted text (13 lines)> Ok here's a new one for me. I was running a 15 lap race at Bullrun. > converted from N2 for ICR2. Using the V2k_icr2 fixes I have the 3d > version running in dma mode and running pretty smooth. Mirrors are > clean etc. I did about 11 laps...spun from the lead to 11th, got back > up to 5th and was challenging 4th when the screen just when black. > the game was still running as I soon heard my car crash into a wall. > I was running from dos7 from a dual boot, everything looked fine for > about 45 minutes of testing etc and then blanko! > is this that screen refresh thing I've read about or just another > gremlin?? > dave henrie > ps hit reset, rebooted and everything was fine...and this is an old > monitor. pre-win95
Yes Dave .I too havr has this happen a few times. I assume you are using a Diamond stealth II as I am. I don't have a definite answer but I didn't notice the problem until I installed the newest "release candidate" driver from diamond.(this could just be coincedence) I too am runnung patched exe and a batchfile to swap speedy file for clear mirrrors. I hope someone has a fix as it is most irrritating to blackout in the middle of a race. BTW I did switch back to the older certified driver (10-97 ? ) a few days ago and I haven't had any problems but then I haven't played ICR2 longer than 45 minutes in that time either. Will do more testing this weekend. Steve at RXspeed7 racing
Dave Henrie 27 Mar 1998#401577
Thanks for the reply. Tried again this morning and it happened again. Yes I have a DSII and I got it just after the latest drivers were released so they were the only ones I've used. I do have the old drivers on the installation cd tho. dave henrie
Quoted text (25 lines)> > Ok here's a new one for me. I was running a 15 lap race at Bullrun. > > converted from N2 for ICR2. Using the V2k_icr2 fixes I have the 3d > > version running in dma mode and running pretty smooth. Mirrors are > > clean etc. I did about 11 laps...spun from the lead to 11th, got back > > up to 5th and was challenging 4th when the screen just when black. > > the game was still running as I soon heard my car crash into a wall. > > I was running from dos7 from a dual boot, everything looked fine for > > about 45 minutes of testing etc and then blanko! > > is this that screen refresh thing I've read about or just another > > gremlin?? > > dave henrie > > ps hit reset, rebooted and everything was fine...and this is an old > > monitor. pre-win95 > Yes Dave .I too havr has this happen a few times. I assume you are using a > Diamond stealth II as I am. I don't have a definite answer but I didn't > notice the problem until I installed the newest "release candidate" driver > from diamond.(this could just be coincedence) I too am runnung patched exe > and a batchfile to swap speedy file for clear mirrrors. I hope someone has > a fix as it is most irrritating to blackout in the middle of a race. BTW I > did switch back to the older certified driver (10-97 ? ) a few days ago and > I haven't had any problems but then I haven't played ICR2 longer than 45 > minutes in that time either. Will do more testing this weekend. > Steve at RXspeed7 racing
Doug Reichl 28 Mar 1998#401664
: Thanks for the reply. Tried again this morning and it happened again. If it always happens about 45 mins in, then it could be an overheating problem. Do you overclock? Is this the only thing that does it? -- -------------------------------------
Dave Henrie 28 Mar 1998#401665
nope everything is still pretty normal....A p200mmx and DSII all running at 66mhz thru an Asus mb. At least one person did say it happens kinda regularly to him. One note that may or may not be related. The opening moving and the replays showed plenty of flashing occuring with some of the background images. Trees and smoke etc would change color in a very *** fashion. I messed around with SSutil to change my refresh rate. And the color flashing went away. I have completed one 15 lap race out of 3 tries but I did cut the Qual session short after getting a pole time against 95% compition. So I'm not sure if the Screen refresh helped or if I had a shorter time actually running the car or if I just got lucky and the problem is still there....time will tell....but I have to put the Champ car in the trailer for now...gotta get ready for a Touring car race....and I have this 4x4 that's itching for some action too...I have virtual racers...why not virtual time?? dave henrie > : Thanks for the reply. Tried again this morning and it happened again. > If it always happens about 45 mins in, then it could be an overheating > problem. Do you overclock? Is this the only thing that does it? > -- > -------------------------------------
Doug Reichl 29 Mar 1998#401775
: The opening moving and the replays showed plenty of flashing occuring : with some of the background images. Trees and smoke etc would change : color in a very *** fashion. Does it only go blank while racing? One thing you can do is what I did to fix my similar problem (mine turned out to be a bad jumper which overclocked my computer too fast). This is what I did: 1) Start ICR2, but don't enter the game. Just let the opening music and racing action play. Let it go until it locks up. I used to start mine, turn off the monitor and go to bed. It would either be still going in the morning or locked up. If it was still going I left it run while at work. 2) If ICR2 crashes during the opening sequence, I got a memory dump to the screen. Not sure if yours will or not. 3) I then would start Quake and let it run in demo mode the same way. I found that Quake would run forever, but ICR2 still crashed/locked up. If yours is heat related, then anything should go blank after such a long time. -- -------------------------------------

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy