Race Sim Central
Rec.Autos.Simulators Archive

NR2 3Dfx Patch question

14 posts by 14 people · 17 Mar 1998 - 30 Mar 1998

P2/333, 128mb RAM, Monster3D (Voodoo1) I already have the patch and have even run it, but I some texture tearing on the track. This is my batch file that runs the game: SET SST_RGAMMA=0.85 SET SST_GGAMMA=0.85 SET SST_BGAMMA=0.85 set N2FXAA=2 set N2FXFOG=0.01 set N2FXLOAD=0x200000 nas3dfx.exe SET SST_RGAMMA=1.70 SET SST_GGAMMA=1.70 SET SST_BGAMMA=1.70 I'm specifying 2mb of text memory (isn't that what the M3d has?). Will specifying a lower number make the tearing go away? Has anyone run this on a Pure 3D? Has anyone run this on a 8mb Voodoo2 card? Has anyone run this on a 12mb Voodoo2 card? Has anyone run this on Voodoo2 SLI configuration?
Jeff Ha 18 Mar 1998#400120
>P2/333, 128mb RAM, Monster3D (Voodoo1) >Has anyone run this on a Pure 3D? I've tried and it locks up my machine HARD. I did move the suggested file to the nascar2 directory but I can't get past the opening screen. Must be the special tweak by Canopus. Jeff I'd love to here from anyone who has it working with a pure3d and would like to know the batch settings used.
I've been running it on a Pure3d, with some difficulty. I've been messing with the N2 environment veriables, but without any noticable effect. I've set anti-aliasing on and off, forced textures high and low, and I can't tell the difference. Are the effects really subtle? Could some kind soul post screenshots comparing the different effects? They would rock! The other strange thing I've noticed is that the 3dfx splash screen (the spinning logo) spins significantly slower before Nascar2 than before any other 3dfx game I've tried. So maybe I'm not configured right. Or maybe it's that glide2x.ovl file required for the Pure3d. Greg Excerpts from netnews.rec.autos.simulators: 18-Mar-98 Re: NR2 3Dfx Patch
Quoted text (13 lines)> >P2/333, 128mb RAM, Monster3D (Voodoo1) > >Has anyone run this on a Pure 3D? > I've tried and it locks up my machine HARD. I did move the suggested > file to the nascar2 directory but I can't get past the opening screen. > Must be the special tweak by Canopus. > Jeff > I'd love to here from anyone who has it working with a pure3d and > would like to know the batch settings used.
It seems to work fine on my Pure 3D. I added the right file (Glide2x.ovl) to my N2 Directory and added SET N2FXAA=1, and SET N2FXLOAD= 0x200000 to Dosstart.bat and everything works fine. BTW I reboot to DOS to play the game. -- Busch Carpentry: "Plans???" "Architects sure can draw nice pictures" Busch Motorsports: "Remember, racecar is racecar spelled backward"
After copying the file as stated in readme3d.txt ran great with my Pure3d. Use the Gns3dfx bat file if you have Grand National Pack or Nas3dfx bat if you dont. I have this in my bat file. SET N2FXAA=2 SET N2FXLOAD=0xffffffff GNS3DFX.EXE -3DFX Havent messed with the fog settings yet.
Quoted text (13 lines)>>P2/333, 128mb RAM, Monster3D (Voodoo1) >>Has anyone run this on a Pure 3D? >I've tried and it locks up my machine HARD. I did move the suggested >file to the nascar2 directory but I can't get past the opening screen. >Must be the special tweak by Canopus. >Jeff >I'd love to here from anyone who has it working with a pure3d and >would like to know the batch settings used.
Da 18 Mar 1998#400124
I run the 3dfx nascar2 on my pure3d with NO problems whatsoever... in win95 AND dos...so it must be your drivers that are not up to date
Quoted text (13 lines)>>P2/333, 128mb RAM, Monster3D (Voodoo1) >>Has anyone run this on a Pure 3D? >I've tried and it locks up my machine HARD. I did move the suggested >file to the nascar2 directory but I can't get past the opening screen. >Must be the special tweak by Canopus. >Jeff >I'd love to here from anyone who has it working with a pure3d and >would like to know the batch settings used.
Just use the recommended settings, except I doubled the memory setting to 200000 from 100000. Works great!
Quoted text (13 lines)>>P2/333, 128mb RAM, Monster3D (Voodoo1) >>Has anyone run this on a Pure 3D? >I've tried and it locks up my machine HARD. I did move the suggested >file to the nascar2 directory but I can't get past the opening screen. >Must be the special tweak by Canopus. >Jeff >I'd love to here from anyone who has it working with a pure3d and >would like to know the batch settings used.
Johnie18 20 Mar 1998#400450
I have a Voodoo2, P233 48MB, any suggestions on making N2 look better? How so I adjust the Bat file? Johnie
Brian Bushe 20 Mar 1998#400451
Edit the nas3dfx.bat file. In it is the line set ***load=0x10000 (can't remember exactly). This sets the high res texture limit to 1 mb change the number to 0x20000 or 0x40000 or upward to get the best result. Play around till you're happy with it. The comments in the readme file explain this better. Brian -- remove 'bye' from address to reply
Greg Cisko 21 Mar 1998#400612
>for me. Anyone with any ideas about how I can get this to perform >better please don't be shy. Use a rendition card :-) -- Header address intentionally scrambled to ward off the spamming hordes.
Devo 21 Mar 1998#400613
> >for me. Anyone with any ideas about how I can get this to perform > >better please don't be shy. > Use a rendition card :-) After reading all these posts, I'm going out to buy one right now (Stealth II S220). It will run right next to my Monster 3D. Diamond will now have a monopoly on my video. Devon
I went out and bought a Stealth II over the weekend and rebooted at least sixty times between Sat and Sunday. That card which worked with everything didn't like N2 or Indy II which is primarily the reason I bought it. I wanted to see the rendition versions of these sims and needed a new 2D card. ( I have a monster 3 D) I tried various fixes (dosfix) but nothing worked and it was*** other things as well. I am running the 98 beta maybe that was it, or maybe the Monster Sound card that sits along side a Sound blaster Pro, whatever I don't know. But as soon as I pulled that card and put in the old one everything went back to normal. Just my little rant. I really wanted this to work but I guess I am looking for another card to go with my M3D Any suggestions? Regards Michael
Max Donogh 26 Mar 1998#401412
On Mon, 23 Mar 1998 10:03:00 -0500, "Michael Richard"
Quoted text (15 lines)>I went out and bought a Stealth II over the weekend and rebooted at least >sixty times between Sat and Sunday. That card which worked with everything >didn't like N2 or Indy II which is primarily the reason I bought it. I >wanted to see the rendition versions of these sims and needed a new 2D card. >( I have a monster 3 D) >I tried various fixes (dosfix) but nothing worked and it was*** other >things as well. >I am running the 98 beta maybe that was it, or maybe the Monster Sound card >that sits along side a Sound blaster Pro, whatever I don't know. But as soon >as I pulled that card and put in the old one everything went back to normal. >Just my little rant. I really wanted this to work but I guess I am looking >for another card to go with my M3D >Any suggestions?
I use an ATI 3D Expression with 2 meg on board, with the Monster 3D of course. On my P166 with 64 megs ram I can run all graphics on with no jerkiness whatsoever. Gotta be at least 30 fps. Running 3DFX patch too!
says... I just recently bought a Stealth 2 as well. Rendition runs a news server at news.rendition.com, you should check it out. The problems with Win98 are well known and affect all Rendition chips, the drivers just aren't ready for prime time it seems. Heck, the Win95 drivers still have problems too. This card would have been great had it come out a year or two ago, but the slow 2D and so-so 3D performance are sending this card back to the store for a refund.

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy