Race Sim Central
Rec.Autos.Simulators Archive

F1RS with a Pentium 133?

7 posts by 7 people · 17 Feb 1998 - 10 Mar 1998

Hello, I'm using an "old" Pentium-P133-PC. I have no 3D-Graphic. Are there experiences with F1RS on an P133 with a good 3Dfx-Graphic? Greetings, Axel -------------------------------------------------------------- - Axel Schlueter - Fax: (02361) 374058 -
Greg Cisko 19 Feb 1998#396957
>Hi >The CPU that you use does not effect the game when you have a 3dfx card. The >3dfx card will do all the work.!! Actually the CPU does affect the game. If he did have a 3dfx card he would most likely reduce the number of computer cars to get smooth game play. Even users with a P5-166 have reported reducing the number of cars to 14 to get smooth gameplay. I have a P5-200MMX and it is smooth with everything maxed out. No way with a P5-133. -- Header address intentionally scrambled to ward off the spamming hordes. >My advise: Wait to the new voodoo2 chipset hits the road, if you wanna buy a >3dfx card, they should be twice as good or even more.!! And the price will >about the same as a the 3dfx cards that are on the market now. >Jakob Baunsgaard >http://home4.inet.tele.dk/rain/f1rs/ >>Hello, >>I'm using an "old" Pentium-P133-PC. I have no 3D-Graphic. >>Are there experiences with F1RS on an P133 with a good 3Dfx-Graphic? >>Greetings, >>Axel >>-------------------------------------------------------------- >> - Axel Schlueter - Fax: (02361) 374058 -
Hi The CPU that you use does not effect the game when you have a 3dfx card. The 3dfx card will do all the work.!! My advise: Wait to the new voodoo2 chipset hits the road, if you wanna buy a 3dfx card, they should be twice as good or even more.!! And the price will about the same as a the 3dfx cards that are on the market now. Jakob Baunsgaard http://home4.inet.tele.dk/rain/f1rs/
Yes, I also have an ancient P133 and a Canopus Pure3D. F1RS works very well with my system with replay off and the second farthest clip setting. I only get slowdowns at the start of a race with more than 15 cars. Can't wait for the AMD price cut to happen and be a K6'n fool. BTW, anybody hear about that AMD cut? Was supposed to happen no later than the first week of Feb. Bill -------- "NASCAR is the Professional Wrestling of Motorsport." -Me-
From what I've heard, an MMX or P2 has much better floating point performance than a K6, and from what I understand, floating point performance is the most important factor here. I would consult an expert before I went for a K6. Btw, I have an old P133 with a Righteous 3D, and the game works great except for the first corner slow down. I'm definitely going to upgrade to an MMX or P2 very soon. --- Jon Petersson
FYI Intel are planning very extensive price cuts on their PII range. Current models will be cut, the new "Covington" will be introduced at a very competitive price and the PII-100 series will be launched at that time also (PII-350 and PII-400 with 100Mhz bus speeds) - these will be expensive at the time of release. If you scour around there'll probably be some price numbers on the web - try Tom's hardware page (http://sysdoc.pair.com) or Intel's own site (http://www.intel.com) Cheers! John
Quoted text (8 lines)>>get slowdowns at the start of a race with more than 15 cars. Can't wait for >>the AMD price cut to happen and be a K6'n fool. >>BTW, anybody hear about that AMD cut? Was supposed to happen no >>later than the first week of Feb. >From what I've heard, an MMX or P2 has much better floating point >performance than a K6, and from what I understand, floating point >performance is the most important factor here. I would consult an expert >before I went for a K6.
I have a K6 200 MMX and it runs all sim's fine, using a 3dfx accel. FYI: The K6 can exec MMX instructions and FPU instructions in the same bit stream without slowdowns of the Intel chips. AMD provided seperate registers for MMX and FPU, whereas Intel used the same one's and just renamed them. Currnet K6 200 MMX chips may be slower on FPU in some cases ( non MMX ), but AMD is adding more pipeline to the FPU on the next rev ( K6 300 Mzh), and the K6+3D will have some new and powerful 3D instructions of it's own. Whether software vendor's will support these new instructions remains to be seen. bill valentine -----------------------------------

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy