% Is it possible to add paddle switches to a T2? I have heard that it was.
% If so, does anyone have the procedure?
I am not sure that "paddle switches" are discussed at Wally'sWorld of
Driving Simulators ([link lost in import: /~wottenad/wheel.htm] but I am
sure this site will walk you through adding "buttons". You might have
to come up with your own "mounting" device for paddles, but you should
well be on the way by stopping by this site.
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
I added a "paddle switch" to my t2 and it works great. I formed a 1/16" brass
plate into a gull-wing shape ( like a 1990 Tyrell), drilled a hole big enough
for it to fit over the wheel shaft, an fastened it to the front of the
steering wheel with some small screws. this plate is further shaped to feel
comfortable (all 4 fingers in contact with the paddles) and is cut down more
toward the center (to give it the proper sensitivity). The brass piece acts as
it's own spring. Radio shack has some momentary switch buttons that fit into
the middle holes on the steering wheel spokes. A set of wires from an old
gamepad goes from the switches, through the hole below the shaft (pop the
plug), and is wired in place of the original buttons. Although it took a
little while to fine tune it has been well worth it, and works great with Gp2,
N2 or Icr2.


































