Race Sim Central
Rec.Autos.Simulators Archive

N2 under Win95 (again)

5 posts by 4 people · 24 Jun 1997 - 26 Jun 1997

CPDRKITEKT 24 Jun 1997#371575
I know it's a tired subject, but I've been trying to get N2 to run under Win95 with no luck, and I'm hoping someone can give me some ideas. I'm running on a Micron P90 w/ 16 mb RAM and Intergraph Reactor (at least it was when I bought it). I've tried configuring using all the default (auto) memory settings and the closest that I've been able to get is the sim starts up but the mouse pointer moves R E A L L Y slow, if at all; and if I do manage to get on the track, everything locks up. If anyone has a similar setup and has got the thing to run I would certainly appreciate any help. Thanks. Chris Patrick
Jay Taylor 24 Jun 1997#371576
Quoted text (11 lines)> I know it's a tired subject, but I've been trying to get N2 to run under > Win95 with no luck, and I'm hoping someone can give me some ideas. I'm > running on a Micron P90 w/ 16 mb RAM and Intergraph Reactor (at least it > was when I bought it). I've tried configuring using all the default > (auto) memory settings and the closest that I've been able to get is the > sim starts up but the mouse pointer moves R E A L L Y > slow, if at all; and if I do manage to get on the track, everything locks > up. If anyone has a similar setup and has got the thing to run I would > certainly appreciate any help. Thanks. > Chris Patrick
Chris, I had a similar problem, and mine was due to memory. I had my bus speed overclocked and the EDO memory I had wasn't fast enough and it would hang the system after a minute or two. When I returned the bus to 66mhz it worked fine. Just needed better memory. You didn't mention if yours was overclocked or not so I'm not sure if this will help, but I thought I'd tell ya anyway Jay Taylor
: I know it's a tired subject, but I've been trying to get N2 to run under : Win95 with no luck, and I'm hoping someone can give me some ideas. I'm : running on a Micron P90 w/ 16 mb RAM and Intergraph Reactor (at least it : was when I bought it). I've tried configuring using all the default : (auto) memory settings and the closest that I've been able to get is the : sim starts up but the mouse pointer moves R E A L L Y : slow, if at all; and if I do manage to get on the track, everything locks : up. If anyone has a similar setup and has got the thing to run I would : certainly appreciate any help. Thanks. You are bordering on not enough memory. While 16meg is suffecient in DOS, I doubt that you have enough to keep it afloat in Win95. Are you running the latest patched version? If so you might want to make sure you are using the -4 switch when running nasrend.exe. Also I found that the only way I could run the dma version in Win95 was to set the MS-DOS protected mode memory (DPMI) to the maximum amount, 16384. This did the trick for me with the patched version of N2. Hope this helps. -- **************************** Michael E. Carver ************************* Upside out, or inside down...False alarm the only game in town. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
Tom J. Ma 25 Jun 1997#371701
Quoted text (25 lines)>: I know it's a tired subject, but I've been trying to get N2 to run under >: Win95 with no luck, and I'm hoping someone can give me some ideas. I'm >: running on a Micron P90 w/ 16 mb RAM and Intergraph Reactor (at least it >: was when I bought it). I've tried configuring using all the default >: (auto) memory settings and the closest that I've been able to get is the >: sim starts up but the mouse pointer moves R E A L L Y >: slow, if at all; and if I do manage to get on the track, everything locks >: up. If anyone has a similar setup and has got the thing to run I would >: certainly appreciate any help. Thanks. >You are bordering on not enough memory. While 16meg is suffecient in >DOS, I doubt that you have enough to keep it afloat in Win95. Are you >running the latest patched version? If so you might want to make sure >you are using the -4 switch when running nasrend.exe. >Also I found that the only way I could run the dma version in Win95 was >to set the MS-DOS protected mode memory (DPMI) to the maximum amount, >16384. This did the trick for me with the patched version of N2. >Hope this helps. >-- >**************************** Michael E. Carver ************************* > Upside out, or inside down...False alarm the only game in town. >=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
Just run it under DOS, it's not going to be smooth if u run under 95
CPDRKITEKT 26 Jun 1997#371795
Thanks for the info. Looks like I'll need to make a trip to da "hardware" store for some more memory. Appreciate the responses. Chris Patrick

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy