Down the drag strip - set your gears up to just shift into 4th as you
approach the start-finish line. This should get you turning 195-197 before
you give the brakes a hard tap going into turn 1. Down shift into 3rd mid
way through turn 1, before you get back on the gas. Accelerate off turn 1
and shift into 4th before you reach the tunnel turn. You should be able to
get through the tunnel turn in 4th gear - keeping the speed at 162-165
minimum. Stay in 4th gear until you get on the brakes for turn 3. Again,
downshift to 3rd mid way through turn 3 and accelerate back down the drag
strip shifting into 4th just as you approach the start-finish line. With a
decent setup you should be able to turn laps at 165+ - sufficient to keep
pace with the AI cars at reasonable strength levels. The AI is pretty
quick here - so you do have to hussle. They are clocked at laps
approaching 167 mph - pretty quick for your car without driving the tires
off the thing. Some folks shift in the tunnel turn - but I find this hurts
my gearing off the other corners and generally does nothing to improve lap
times. In general, if you don't have to shift - don't ! In real life
this is particularly true, since a shift runs the risk of over-revving the
engine and of destroying the gearbox and/or clutch. In the sim it just
takes away from your concentration of hitting the right line through the
turn.
/THansen
> > Can someone explain to me exactly how a good lap would be driven with
> > shifts? I can't seem to get it right . .
I think the best bet is to shift at the s/f line and downshift in middle
one, and stay in 3rd all the way around...
--
--------------------------------------------------------
Brian Motisko
http://members.aol.com/bmotisko/private/index.htm
--------------------------------------------------------
>Hi,
>Ok, I'm influenced by TV, and want to do some driving at Pocono.
>Can someone explain to me exactly how a good lap would be driven with
>shifts? I can't seem to get it right . . .
>-Kolin S. Murray
I too downshift in each corner. My gearing is as follows:
1st-9.00
2nd-5.00
3rd-4.00
4th-3.60
--------------
Michael Kirton
Go to 3rd in turn 1, ideally stay in 3rd until the start-finish line. I go
to 3rd in t1 4th on the long pond staight, 3rd in t3, 4th at start finish


































