Followup-To:
positive) in "practice" using the F-key, then go into the garage and save it.
John Wehman
jwehman"at"slip.net
--------
If you want to reply, please remove the "*" in my address
--------
Has anyone had the problem with no positive Cross Weight? The slider goes
from -300 down to 0. Also if this does in fact affect everyone, I
personally run both N2 versions, 1.00 &1.02 and I set the car up in ver
1.00 then copy the setup to the particualr tarck in question in N2 ver
1.02, pain in the ass but it works nonetheless.
Regards,
Jeff Euclid
WNA-JR on Kali
Visit World Nascar Association at:
http://gamezone.line-art.com/WNA/menuframe.htm
for Offline Racing and other great info on N1 and N2.
This is what I did to resolve the No pos cross weight problem. I had a
layout.dat file that refused to be patched because I had altered the
dash. I copied the old layout.dat file from the cd and the patch went
through. When I ran N2 after the patch the cross weight was fine. I
overwrote the layout.dat file with the altered dash ver. and got the
cross weight problem. I made a new layout file from the patched ver.
with my dash pcx and everything worked fine after that. BTW -- I did
do a full re-install do to other problems and did the work with the
layout file afterwards.
