Hi, a few weeks ago I bought a Reactor card. I had someone else put it
in because I know nothing about computers. Well, we had problems, so the
guy had to put my old card back in. So instead of returning the card
back I think I found out what might be wrong. So now I want to install
it myself. But...Is it easy? The guy said to just slip off the cover and
put the card in the slot, right below the joystick port. I see were he
is talking about but is it that easy? Just slid it in and put the***
in. I don't even have to take out my old card, I can disable it from
Win'95. If it is easy I'll give it a try. Plus what's this about static?
I heard that it can ruin the card. What can I do so I don't get static.
I really want to use this card. If I still have a problem then I'll send
it back. What I plan on doing is just get the card in and then calling
the tech people. I heard it worth the trouble for this card. Any
suggestions, help, ect, ect, ect, would be of great help.
Thanks,
Matt
Yes it is pretty much that easy, but you really should take out your
old video card and use the Reactor in its place (most systems will not
like detecting two VGA devices). After you get the case open, touch
the metal of the power supply to dissipate any static you may have.
--
The IWCCCARS Project: Q & A Representative
http://www.theuspits.com/iwcccars/index.html
http://userwww.service.emory.edu/~ebusch/
Matt,
It is pretty easy as long as you follow a few steps. I would suggest
going to a good computer book store and looking for a book on building
and/or maintaining a PC. You could probably just browse the book in
the store and pick up everything U needed to know. If not, email me
and I will write something up when I have the time.
Paul
Quoted text (16 lines)
>Hi, a few weeks ago I bought a Reactor card. I had someone else put it >in because I know nothing about computers. Well, we had problems, so the >guy had to put my old card back in. So instead of returning the card >back I think I found out what might be wrong. So now I want to install >it myself. But...Is it easy? The guy said to just slip off the cover and >put the card in the slot, right below the joystick port. I see were he >is talking about but is it that easy? Just slid it in and put the*** >in. I don't even have to take out my old card, I can disable it from >Win'95. If it is easy I'll give it a try. Plus what's this about static? >I heard that it can ruin the card. What can I do so I don't get static. >I really want to use this card. If I still have a problem then I'll send >it back. What I plan on doing is just get the card in and then calling >the tech people. I heard it worth the trouble for this card. Any >suggestions, help, ect, ect, ect, would be of great help. >Thanks, >MattMake sure that the power lead is plugged in BUT TURNED OFF!!
That way any static discharge will be earthed.....if you don't have the
lead plugged in, unless you're in bare feet there is little chance to
dissipate any static charge.
bk
> Make sure that the power lead is plugged in BUT TURNED OFF!!
What, the computer turned off, but the main cord plugged into the wall?
With the plug in the wall, the chassis is still connected to ground.
By touching the case (the metal cage of the power supply for example)
before installing the components, any build-up of static electricity
can be harmlessly removed from your body.
--
The IWCCCARS Project: Q & A Representative
http://www.theuspits.com/iwcccars/index.html
http://userwww.service.emory.edu/~ebusch/
wall?
True, but most people who've never upgraded their computers would
probably not have an electrostatic wristband. Your method is obviously
the preferred way, but for many it is asking too much.
--
The IWCCCARS Project: Q & A Representative
http://www.theuspits.com/iwcccars/index.html
http://userwww.service.emory.edu/~ebusch/
charge.


































