Race Sim Central
Rec.Autos.Simulators Archive

Per4mer Turbo Wheel

13 posts by 12 people · 30 Dec 1996 - 07 Jan 1997

asea.. 30 Dec 1996#350877
Having just received NASCAR 2 for Christmas, I was wondering how this steering wheel would work with it. I know the T2 is supposed to be better, but cash is low. Any suggestions would be appreciated. Aaron
Rick Fisk 31 Dec 1996#351078
> Having just received NASCAR 2 for Christmas, I was wondering how this > steering wheel would work with it. I know the T2 is supposed to be > better, but cash is low. Any suggestions would be appreciated. > Aaron Hi Aaron, Don't know about the Per4mer wheel, but the Mad Catz wheel is another less expensive alternative to the T2. The construction is much lighter than the T2 and it has a weird 3/4 wheel with nine buttons and a hat switch. Control response however is very smooth and I prefer the feel of the Mad Catz pedals over those of the T2. I bought mine yesterday at Circuit City - $69.99. Don't know about support - Thrustmaster support is excellent according to other posters here. I used a home built wheel and pedal setup until yesterday when a friend came over and talked me out of it. I went shopping planning to buy a Thrustmaster GP1 or T2, but everyone was sold out and I was going through Nascar withdrawal - so I got the Mad Catz. It's not a T2 but it will do until I can build another setup. Rick
Domin 31 Dec 1996#351079
It really is. I just got off the phone with their service department (Dave helped me) due to a broken throttle spring. He didn't give me the run around or ask me a million questions, but was immediately said he'd get me new springs. I asked if I could drive over (only 40 miles or so from them), and he said it was OK. He even offered to still mail them to me to save me the trip. He gave excellent directions to get to their facility, BTW. --- () http://www.pacifier.com/~dtuso () Dominic Tuso () http://www.nicad.com/ () For you NiCd needs () http://www.teleport.com/~cramark () R/C car racing club () http://www.teleport.com/~lzwz/rcsr.htlml () R/C car racing club
Don't DON'T buy a Per4mer Turbo Wheel .....................DON'T My wife bought me one for my Birthday last year... it lasted a week.. I will be glad to send you mine for free if you pay shipping..... but hurry its on the way to the dumpster!!!!!!!! >Having just received NASCAR 2 for Christmas, I was wondering how this >steering wheel would work with it. I know the T2 is supposed to be >better, but cash is low. Any suggestions would be appreciated. >Aaron
Mikel753 31 Dec 1996#351081
I've had 2 of them. I paid 80 bucks for the first piece of *** and 2 months later it was half the price. EB replaced it for me after about a month and 1/2 after buying it (very nice of them), after I wore it out. The second one, I took apart and greased the moving parts (it's plastic with a metal ball that is used to return the wheel to center). That causes a lot of friction between the ball and the plastic. It has lasted 6 months or so but I recently gave it up for regular analog joystick. I will buy a T2 with my tax return I'm also using CH pedals. They are awesome and have lasted a long time so far. Mike Lewis
Quoted text (15 lines)> Don't DON'T buy a Per4mer Turbo Wheel .....................DON'T > My wife bought me one for my Birthday last year... it lasted a week.. > I will be glad to send you mine for free if you pay shipping..... but > hurry its on the way to the dumpster!!!!!!!! > >Having just received NASCAR 2 for Christmas, I was wondering how this > >steering wheel would work with it. I know the T2 is supposed to be > >better, but cash is low. Any suggestions would be appreciated. > >Aaron
I have had my Per4mer now for over six months...No problems as of yet. It does seem to be getting sloppy though at center. I took it apart to look at it, and the metal ball is starting to wear the plastic retainer pretty good. Also running CH pedals...Love 'em! Jimmy McKinley #12 WilBoo Computers Pontiac Tidewater NASCAR Modem Series
Chuck Stuar 01 Jan 1997#351267
> Having just received NASCAR 2 for Christmas, I was wondering how this > steering wheel would work with it. I know the T2 is supposed to be > better, but cash is low. Any suggestions would be appreciated. > Aaron Even if its free, its over priced. -- Chuck Stuart - Mesquite TX USA RaceTime utility program for Nascar1/Indycar2. http://www.metronet.com/~cstuart/
Mike Radl 01 Jan 1997#351268
> I have had my Per4mer now for over six months...No problems as of yet. >It does seem to be getting sloppy though at center. I took it apart to >look at it, and the metal ball is starting to wear the plastic retainer >pretty good. Also running CH pedals...Love 'em! I'm rough on equipment. I try to rip the wheel off the left side of the table as I'm turning. The Per4mer looks and feels like it would come off in my hands. I've only tried it in the store so I may be underestimating it. I've been using a CH VPPro wheel and pedal combo for a year. Never even a hint of a problem yet. I too love the CH pedals. They forced me to learn to left foot brake, something I had a hard time with in real life. I'm extremely happy with the reliability but...the wheel does have some shortcomings: I had to rig up a wood bracket to mount the CH wheel at the desired angle. I had to seriously beef up the mounting so I wouldn't rip it off the table as I was turning. Since it's really a flight yoke, I had to use a hose clamp to keep it back all of the time so it wouldn't move in and out as I was driving. It has a centering notch that can bother you when your trying to be super smooth at a track like Dega (I think this is more of a mental rather than physical problem). The buttons on the wheel work flawlessly. It also has hat switches within thumbs length. Sure wood be neat if the hat switches could be used to modify pit settings. When I get rich and can afford a better wheel, I think I'll skip the Thrustmaster T2 and go to one of the high end units. I don't want to upset any T2 users but I've seen too many posts that read like..."Thrustmaster is great! Why, they've fixed my T2 five times this year and they are nice guys!". I have no idea how good the CH support is because I've never needed it. Mike Radler
Ed Benson 02 Jan 1997#351444
Quoted text (23 lines)> > Having just received NASCAR 2 for Christmas, I was wondering how this > > steering wheel would work with it. I know the T2 is supposed to be > > better, but cash is low. Any suggestions would be appreciated. > > Aaron > Hi Aaron, > Don't know about the Per4mer wheel, but the Mad Catz wheel is another > less expensive alternative to the T2. The construction is much lighter > than the T2 and it has a weird 3/4 wheel with nine buttons and a hat > switch. Control response however is very smooth and I prefer the feel > of the Mad Catz pedals over those of the T2. I bought mine yesterday at > Circuit City - $69.99. Don't know about support - Thrustmaster support > is excellent according to other posters here. > I used a home built wheel and pedal setup until yesterday when a friend > came over and talked me out of it. I went shopping planning to buy a > Thrustmaster GP1 or T2, but everyone was sold out and I was going > through Nascar withdrawal - so I got the Mad Catz. It's not a T2 but it > will do until I can build another setup. > Rick
I have a MadCatz, and I've been pretty happy with it. It feels cheap and doesn't have a lot of resistance to turning like the T2, but once you get used to the feel it works pretty good. Response is nice and smooth. Not long after I got it the nut came off the mounting***for the gas pedal and I replaced it w/ one that didn't quite fit, so the pedal feels slightly weird but it still works fine. BTW I got mine at EB for $40-45. -- Ed
Chris Hoo 03 Jan 1997#351630
: } Don't know about support - Thrustmaster support : }is excellent according to other posters here. : It really is. I just got off the phone with their service department (Dave : helped me) due to a broken throttle spring. He didn't give me the run I wish I could say the same. My T2 (6 months old) gas pedal spring broke about a week ago and I: - called a number of times (only ever got busy signals or a voice mail box) a left a couple of messages desribing my problem and how to get ahold of me. - e-mailed Thrustmaster's service dept. with a full description of my problem, along with my phone number, e-mial address, and street address. I've not yet been contacted. Did they ( Thrustmaster) get washed out in all the ice, rain and snow in Portland? : around or ask me a million questions, but was immediately said he'd get me : new springs. I asked if I could drive over (only 40 miles or so from : them), and he said it was OK. He even offered to still mail them to me to : save me the trip. He gave excellent directions to get to their facility, : BTW. : --- : () http://www.pacifier.com/~dtuso () Dominic Tuso : () http://www.nicad.com/ () For you NiCd needs : () http://www.teleport.com/~cramark () R/C car racing club : () http://www.teleport.com/~lzwz/rcsr.htlml () R/C car racing club -- Chris Hook
Domin 03 Jan 1997#351631
I am not really sure why they haven't. I went down there on New Year's Eve and the roads looked really bad. On my way back home, there were many mud slides reported as well as roads blocked due to high water. I might have gotten a lot worse out in their neck of the woods. Luckily I live in a higher area without a mountain around to worry about sliding down onto me. --- () http://www.pacifier.com/~dtuso () Dominic Tuso () http://www.nicad.com/ () For you NiCd needs () http://www.teleport.com/~cramark () R/C car racing club () http://www.teleport.com/~lzwz/rcsr.htlml () R/C car racing club
Nope....just a flood of calls from the holiday shopping season!<G> We definitely underestimated the rush this year, and are Very, VERY Busy. We're trying to get everyone taken care of as best we can tho'! The best time to call for the Service Dept. is probably in the morning at 8:00AM Pacific Time, sharp. Their phone # is (503)615-3202...make sure you call them if you just need replacement parts or if you have something physically broken that needs to be sent in, as the tech support que has a much longer wait, and once it's found that you need a replacement part, you'd be transfered over to Service anyway! Gotta Go....phone calls to answer! ;-) Matt ThrustMaster, Inc.
akco.. 07 Jan 1997#352334
Don't buy it, it's a very cheaply made, low quality wheel. I'd advise you to spend a few extra $$$ and get a Thrustmaster GP1. It's very solidly made, feels great to drive with, and it has TM's rock solid customer support behind it. Later on when you have some extra money, you can add a set of CH Pedals for about $40 and have a really nice racing setup. David *** You're only young once, but you can stay immature forever ***

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy