Quoted text (10 lines)
> =
> I've experienced the exact same problem and have been searching for the=
> answer too... PLEASE... help me...
> =
> > Tonight, a friend and I tried to play GP2, we both have 33.6 USRs and=
> > it was pathetically slow! The frame rates were brutal, it felt as if=
> > we had hooked up at 4800 baud. Has anyone been able to have a
> > successful modem game? We both were in VGA mode, with no objects, an= d
> > all textures off except for track and smoke. I have played GP2 using = a
> > direct link game with a null modem cable and it was great. Any
> > comments on this topic would be appreciated.
> > PI
It's probably a matter of init-strings.
Are you using a standard init-string? Well, it's very simple, don't.
They're probably not fully compatible with one or both modems, or they si=
mply stink.
I don't know the command-sets for your modems, but if they are Rockwell-b=
ased and
Hayes-compatible, then one of the following init-strings might work :
9600 : ATS37=3D9N0S46=3D0&Q0&K0%C0 ..(Zoom 14k4 fax/modem) ............=
modem fixed at 9600
9600 : AT%C0\N0B8 ...............(Tornado 288h 28k8 fax/modem) ....mode=
m fixed at 9600
14k4 : ATS37=3D11N0S46=3D0&Q0&K0%C0 .(Zoom 14k4 fax/modem) ............=
modem fixed at 14k4
28k8 : AT%C0\N0B11 ..............(Tornado 288h 28k8 fax/modem) ....mode=
m fixed at 14k4
28k8 : AT%C0\N0B15 ..............(Tornado 288h 28k8 fax/modem) ....mode=
m fixed at 28k8
28k8 : AT%C0\N0&K0 ..............(Dynalink 1428VQH 28k8 fax/modem) mode=
mspeed determined
by=
negotiation with
th=
e other modem
If you need the strings with B8 or B15, the value sets the speed,
and 10 or 11 will set it to 14k4 (I don't have this modem, so I
don't know the exact value for sure), you should be able to find
this in your modem-manual.
(In all strings the 0's are zero's, not capital o's)
All these init-strings turn off datacompression (%C0) and DTE/DCE-flowcon=
trol (&K0)
and select normal, speed buffering, mode (\N0). () for Dynalink.
Some information about the above init-strings to help you find your way i=
n
your modem-manuals :
Zoom-modem commands :
S37=3D9 : sets 9600 baud
S37=3D11: sets 14k4 baud
N0 : modem will only handshake with other modem if connectionspeed
matches S37 register.
S46=3D0 : disables datacompression.
&Q0 : asynchronous operation in direct mode, DTE (pc) speed must matc=
h
telephoneline-speed.
&K0 : disable flowcontrol (RTS/CTS).
%C0 : disable datacompression.
Tornado modem :
%C0 : disable datacompression.
\N0 : selects normal, speedbuffering, mode.
B8 : selects 9600 baud
B11 : selects 14k4 baud (might be 10)
B15 : selects 28k8
Before I had the Zoom-modem (14k4), and I used the 9600 init-string.
When selecting a baudrate of 19200 in GP2 it slowed down the gameplay,
what probably means that GP2 tried to get rid of it's data at 19200,
while the modem couldn't serve it, so to be on the save side, select 9600=
in GP2.
I don't think GP2 'sees' that the modem is fixed at 9600 by the init-stri=
ng,
so it won't see it beeing set at 14k4 either, if you would select 19200.
In other words : if you use an init-string that sets your modem fixed at =
a
certain baudrate, select a baudrate below or equal in GP2.
When you're using two different PC's, then the slower must be the
leader. The 'follow'-er gets a hard load to pull and probably will let
off steam every now and then.
While in menu's pressing Ctrl-M brings up a chatwindow.
Just to give you an idea of what linking does to me:
The graphics-settings I'm using for other circuits than Monaco are :
(P120, 16MBEDO, DS64_2MBDRAM/S3SPDUP)
While not linking : SVGA, Fences, Track, Hills, Trackside objects
No plot and no texture in mirrors
All trackside objects
Estimated framerate 17.0 , I set it at 13.4
While direct-linking : SVGA, Fences, Hills, Trackside objects
No plot and no texture in mirrors
All trackside objects
Framerate set to 12.8
While modem-linking : Same as with direct, but fps set to 12.1 or 11.8
Hope this helps,
Ren=E9 van Lobberegt, The Netherlands.
-- =
***************************************************************
* If you decide not to choose, you still have made a choice. *
*
http://www1.tip.nl/users/t752096/ *
* Windows :-( .....brings you yesterdays speed today *
* .....the choice of a brainwashed generation *
***************************************************************
