I have tried using a T2 with N2 but it's way too touchy. I've calibrated
the wheel properly and chosen wheel as my control device. If I use a
joystick, it works fine. What can I do to make the T2 work with N2?
--
=======================================
Why Not Visit Brian Nash's
Ultimate Grand Prix II Links Page
http://www.geocities.com/motorcity/2653
THE ORIGINAL --- ACCEPT NO SUBSTITUTES!
Brian,
I had the same problem. Select Joystick instead of wheel, it works!
Quoted text (9 lines)
> I have tried using a T2 with N2 but it's way too touchy. I've calibrated > the wheel properly and chosen wheel as my control device. If I use a > joystick, it works fine. What can I do to make the T2 work with N2? > -- > ======================================= > Why Not Visit Brian Nash's > Ultimate Grand Prix II Links Page > http://www.geocities.com/motorcity/2653 > THE ORIGINAL --- ACCEPT NO SUBSTITUTES!Lower your wheel lock. I have mine set to around 6-8 at most tracks in
Nascar 2.
--
-Paul Eigsti
: I have tried using a T2 with N2 but it's way too touchy. I've calibrated
: the wheel properly and chosen wheel as my control device. If I use a
: joystick, it works fine. What can I do to make the T2 work with N2?
Try reducing the steering lock in the car setup.
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
Quoted text (9 lines)
> I have tried using a T2 with N2 but it's way too touchy. I've calibrated > the wheel properly and chosen wheel as my control device. If I use a > joystick, it works fine. What can I do to make the T2 work with N2? > -- > ======================================= > Why Not Visit Brian Nash's > Ultimate Grand Prix II Links Page > http://www.geocities.com/motorcity/2653 > THE ORIGINAL --- ACCEPT NO SUBSTITUTES!writes:
REPLY:
Yeah Dega's the big easy. But go to Martinsville, reducing lock is
proably not a good option. I belive right now I'm at 21 on that track.
All the little tracks, unless I'm doing something wrong requires a
fairly open steering radius.
Q.B.M.
:
: >I also have a T2 with N2. I thought my wheel was screwed with the new
: >sim till I read the manual. Reduce the wheel lock in your setup. For
: >example, Using the ACE setup at Tally, I reduced the wheel lock to 7.
: >Result, not flying across the track when I touch the wheel. Further
: >experiments led me to reduce wheel lock about 30-40% on the other
: setups
: >and tracks tested.
:
:
: REPLY:
:
: Yeah Dega's the big easy. But go to Martinsville, reducing lock is
: proably not a good option. I belive right now I'm at 21 on that track.
: All the little tracks, unless I'm doing something wrong requires a
: fairly open steering radius.
:
I keep the lock down on all tracks. Maybe a max of 12 on a road course,
but usually 9-7 on ovals. I think you need to go back and revisit your
car setup. It sounds like it is WAY too tight. But, then if that's
they way you like it setup no biggie. Just passing on an observation.
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
> I have tried using a T2 with N2 but it's way too touchy. I've calibrated
> the wheel properly and chosen wheel as my control device. If I use a
> joystick, it works fine. What can I do to make the T2 work with N2?
I believe that using the joystick in N2 is the same as using
non-linear in N1. This is what I did with the demo cause there was no way
I could drive the car with the wheel setting, way too squirrly. Keeping
the wheel lock on the low side might help too even with the joystick
option. In N1 I run a wheel lock of 10 at most of the bigger tracks with
the non-linear/joystick option.
tom
_______________________________________________________________________
| |
| HAWAII resident since 9-18-95 / on-line handle: TCEckels |
| |
| All The B.S. Stops When The Green Flag Drops! |
|_______________________________________________________________________|
I had the same question and was told by several very helpful people to select
joystick/keyboard under controls (still using the wheel) and it works great!
-Andy
Quoted text (21 lines)
>Lower your wheel lock. I have mine set to around 6-8 at most tracks in >Nascar 2. >-- >-Paul Eigsti >> I have tried using a T2 with N2 but it's way too touchy. I've calibrated >> the wheel properly and chosen wheel as my control device. If I use a >> joystick, it works fine. What can I do to make the T2 work with N2? >> -- >> ======================================= >> Why Not Visit Brian Nash's >> Ultimate Grand Prix II Links Page >> http://www.geocities.com/motorcity/2653 >> THE ORIGINAL --- ACCEPT NO SUBSTITUTES!Lowering the wheel lock is good, but straight from Papy's mouth, T2
users should choose Joystick for their control option. That gives you
either Linear or Non Linear steering, sorry, I forgot which...
Dave Henrie
Just leave your wheel hooked up and select joystick. Your T2 will still
work but you will have more control over the steering.
Homepage http://user.mc.net/~n9ldx


































