DOS Reactor Drivers

Is there any chance that there will be any DOS drivers for the Reactor? Is any one else having this problem: In order to run ICR2 with my Reactor, I have to load Win95, then restart the computer in MS-DOS mode, then run ICR2. If I press F8 at the ' Starting Windows 95 ' prompt, then boot to the command prompt, all of the graphics I see in ICR2 is about 2 inches of trash at the top of the screen. The game is running, but the graphics are hosed. I caw / will continue to do this, but it is a real pain. Any fixes for this? Oh yeah, another question: Ok, when ICR2 does run, I see the Rendition Ready Logo in color, then it changes to B/W, then I see the text from the Indyfast batch file, then some garbage is displayed at the top of the screen, and then I get the Papyrus start screen. and the programs loads. What is being displayed on the screen that I am missing? Just curious. Robert.

Quoted text (14 lines)

>Is there any chance that there will be any DOS drivers for the Reactor? >Is any one else having this problem: In order to run ICR2 with my Reactor, >I have to load Win95, then restart the computer in MS-DOS mode, then run >ICR2. If I press F8 at the ' Starting Windows 95 ' prompt, then boot to >the command prompt, all of the graphics I see in ICR2 is about 2 inches of >trash at the top of the screen. The game is running, but the graphics are >hosed. I caw / will continue to do this, but it is a real pain. Any fixes >for this? >Oh yeah, another question: Ok, when ICR2 does run, I see the Rendition >Ready Logo in color, then it changes to B/W, then I see the text from the >Indyfast batch file, then some garbage is displayed at the top of the >screen, and then I get the Papyrus start screen. and the programs loads. >What is being displayed on the screen that I am missing? Just curious. >Robert.

I am also having the same problems. I hope they have a good reply to this problem. It sure is not working right as far as I'm concerned. Barry Clay

><Snip> > I am also having the same problems. I hope they have a good reply to > this problem. It sure is not working right as far as I'm concerned. I hope they don't just write it off as an undocumented feature! :-)

Quoted text (16 lines)

>Subject: DOS Reactor Drivers >Date: 10 Nov 1996 17:50:40 GMT >Is there any chance that there will be any DOS drivers for the Reactor? >Is any one else having this problem: In order to run ICR2 with my Reactor, >I have to load Win95, then restart the computer in MS-DOS mode, then run >ICR2. If I press F8 at the ' Starting Windows 95 ' prompt, then boot to >the command prompt, all of the graphics I see in ICR2 is about 2 inches of >trash at the top of the screen. The game is running, but the graphics are >hosed. I caw / will continue to do this, but it is a real pain. Any fixes >for this? >Oh yeah, another question: Ok, when ICR2 does run, I see the Rendition >Ready Logo in color, then it changes to B/W, then I see the text from the >Indyfast batch file, then some garbage is displayed at the top of the >screen, and then I get the Papyrus start screen. and the programs loads. >What is being displayed on the screen that I am missing? Just curious. >Robert.

Robert, I have the EXACT same problem! I have a case opened with Intergraph, please call them and open another, I haven't yet heard of a fix, I am glad I am not the only one having this problem. Make sure you tell them your CPU/Bios/ and Chipset specs. l8r, Todd

I too have the same problem. I have to load up Win95 first and then restart in MS-DOS mode to get both INDYFAST.BAT and Quake to run properly. I am going to call them tomorrow and see what they say...

Quoted text (31 lines)

> >Subject: DOS Reactor Drivers > >Date: 10 Nov 1996 17:50:40 GMT > >Is there any chance that there will be any DOS drivers for the Reactor? > >Is any one else having this problem: In order to run ICR2 with my Reactor, > >I have to load Win95, then restart the computer in MS-DOS mode, then run > >ICR2. If I press F8 at the ' Starting Windows 95 ' prompt, then boot to > >the command prompt, all of the graphics I see in ICR2 is about 2 inches of > >trash at the top of the screen. The game is running, but the graphics are > >hosed. I caw / will continue to do this, but it is a real pain. Any fixes > >for this? > >Oh yeah, another question: Ok, when ICR2 does run, I see the Rendition > >Ready Logo in color, then it changes to B/W, then I see the text from the > >Indyfast batch file, then some garbage is displayed at the top of the > >screen, and then I get the Papyrus start screen. and the programs loads. > >What is being displayed on the screen that I am missing? Just curious. > >Robert. > Robert, > I have the EXACT same problem! I have a case opened with Intergraph, please > call them and open another, I haven't yet heard of a fix, I am glad I am not > the only one having this problem. Make sure you tell them your CPU/Bios/ and > Chipset specs. > l8r, > Todd

> ><Snip> > > I am also having the same problems. I hope they have a good reply to > > this problem. It sure is not working right as far as I'm concerned. > I hope they don't just write it off as an undocumented feature! :-) Same on my machine. Every time I start ICR2 from Win95(full soft reboot, its own config.sys & autoexec.bat), instead of the Papyrus screen, I get a screen with garbage at the top. The sim runs ok, but I can't see what is happening. If I exit the sim, do a 'hardware' reset, then it works every time. Something is causing problems when only a soft reboot is done from Win95. Still, it's worth it! -- "Feel Lucky, Scubaboy?" - Discovery Channel, Shark Week, 1995

Whew!! And I thought it was just me! I wonder how many others there are out there? Will send the trouble report tomorrow. Actually, David monitors this SIG. So, David, do you have any knowledge of this? Robert

>Same on my machine. Every time I start ICR2 from Win95(full soft reboot, >its own config.sys & autoexec.bat), instead of the Papyrus screen, I get >a screen with garbage at the top. The sim runs ok, but I can't see what >is happening. If I exit the sim, do a 'hardware' reset, then it works >every time. Something is causing problems when only a soft reboot is >done from Win95. Still, it's worth it! Actually, the hard reset is only required for running ICR2. A soft reboot will be sufficient for Quake. Also, you must hard reset the machine if you run Quake first, and then ICR2. /===================================================\ | John Simmons (Redneck Techno-Biker) | | http://www2.connectnet.com/users/jms/index.html | \===================================================/

Quoted text (14 lines)

> I too have the same problem. I have to load up Win95 first and then > restart in MS-DOS mode to get both INDYFAST.BAT and Quake to run > properly. I am going to call them tomorrow and see what they say... > > >Subject: DOS Reactor Drivers > > >Date: 10 Nov 1996 17:50:40 GMT > > >Is there any chance that there will be any DOS drivers for the Reactor? > > >Is any one else having this problem: In order to run ICR2 with my Reactor,

From the content of this thread, I assume everyone who is having trouble with the Reactor running ICR2 and Quake are at least able to use the Reactor in Win95. I haven't even gotten that far yet. When I initially installed the card, it appeared to be working fine, but it wouldn't allow me to change resolution or colors. It complained about a conflict with my com2: port. I disabled the com2: port and it still complained about conflicts. Finally I decided to reinstall Win95 with the card in. It installed fine but doesn't recognize the car as a Rendition card. I have to choose Standand VGA. When I reload the Rendition drivers from the disk, it accepts them, then locks up when I restart Win95. ICR2 does the same thing you've described, but I never tried running it after loading Win95. I figured it was pointless. I'm calling Intergraph today. David Martin

Quoted text (15 lines)

>> I too have the same problem. I have to load up Win95 first and then >> restart in MS-DOS mode to get both INDYFAST.BAT and Quake to run >> properly. I am going to call them tomorrow and see what they say... >> > >Subject: DOS Reactor Drivers >> > >Date: 10 Nov 1996 17:50:40 GMT >> > >Is there any chance that there will be any DOS drivers for the Reactor? >> > >Is any one else having this problem: In order to run ICR2 with my

Reactor,

Quoted text (17 lines)

>From the content of this thread, I assume everyone who is having trouble >with the Reactor running ICR2 and Quake are at least able to use the >Reactor in Win95. I haven't even gotten that far yet. When I initially >installed the card, it appeared to be working fine, but it wouldn't >allow me to change resolution or colors. It complained about a conflict >with my com2: port. I disabled the com2: port and it still complained >about conflicts. Finally I decided to reinstall Win95 with the card >in. It installed fine but doesn't recognize the car as a Rendition >card. I have to choose Standand VGA. When I reload the Rendition >drivers from the disk, it accepts them, then locks up when I restart >Win95. >ICR2 does the same thing you've described, but I never tried running it >after loading Win95. I figured it was pointless. I'm calling >Intergraph today. >David Martin

David, Try running the attached DMADIAG program from your ICR2 directory before running INDYFAST. It solved the problem for me and a couple of other people. Mike Newhall at Papyrus is looking into this. Dave (davids) Sparks Late Night League http://www.sequoia-dev.com/Hawaii/latenite.html begin 644 dmadiag.zip <uuencoded_portion_removed> ` end

Quoted text (14 lines)

> David, > Try running the attached DMADIAG program from your ICR2 directory before > running INDYFAST. It solved the problem for me and a couple of other > people. Mike Newhall at Papyrus is looking into this. > Dave (davids) Sparks > Late Night League > http://www.sequoia-dev.com/Hawaii/latenite.html > Name: dmadiag.zip > Part 1.2 Type: Zip Compressed Data > (application/x-zip-compressed) > Encoding: x-uuencode

Didn't do a thing for me, I'm afraid :-(. Still have to run Win95 before ICR2. Weird thing is that DMADIAG reports transfer rates of 70+ MB/s on my P120 using DMA, and that I can run VQuake just fine directly from DOS without paying a visit to Win95 ... go figure ... -- Henrikki (Hena) Hakkanen Tel. +358-(9)0-345 5538 ------- The best way to accelerate a Mac is 9.81 m/s2 -------- -------------------------------------------------------------- Disclaimer: Opinions expressed here are mine and does not necessarily reflect those of my employer!

Problems with DOS INDY2 games in DOS. Try this. I was having problems with INDY2 also and found out that removing the UNIVBE drivers from DOS got rid of my big 2 inch band at the top of the screen. So try removing UNIVBE driver by going into setup in DOS and see what happens. It worked for me with original INDY2 game Dave Thayer