Guys,
I'm probably a bit late, here, but I just read about Richard Burns Rally in
the sunday supplement, and it sounds good.
Can anyone tell me how well it will run with:
AMD 2400+, 512 RAM, Win98SE, NVidia Ti4200, MSFF gameport wheel.
Does it have force feedback?
Will I like it ;-)
R.
Will RBR run on an older Windows 98 PC?
Richard Beckett asked whether Richard Burns Rally would run on his Athlon 2400+, GeForce4 Ti4200 and Windows 98SE with a gameport wheel. Replies said it would be playable at moderate resolution, while Uwe Schurkamp reported crashes on SiS 735 boards fixed by a BIOS update and reversed TSW2 pedal axes. Tony Rickard suggested calibrating pedals with throttle half-on in Windows.
Automated summary.
Quoted text (7 lines)
> I'm probably a bit late, here, but I just read about Richard Burns Rally > in > the sunday supplement, and it sounds good. > Can anyone tell me how well it will run with: > AMD 2400+, 512 RAM, Win98SE, NVidia Ti4200, MSFF gameport wheel.On Mon, 13 Sep 2004 11:24:47 +0100, Richard S Beckett wrote:
Hi Richard, make sure you don't have a SiS 735 based mobo (like the
ECS K7S5A series). It looks like RBR crashes and BURNS on those
components.
cheers,
uwe
--
mail replies to Uwe at schuerkamp dot de ( yahoo address is spambox)
Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/
Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E)
GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61
Quoted text (11 lines)
> Guys, > > I'm probably a bit late, here, but I just read about Richard Burns Rally in > the sunday supplement, and it sounds good. > > Can anyone tell me how well it will run with: > > AMD 2400+, 512 RAM, Win98SE, NVidia Ti4200, MSFF gameport wheel. > > Does it have force feedback? >"Uwe Sch�rkamp" <[email hidden]> wrote in message
news:[email hidden]...
> Hi Richard, make sure you don't have a SiS 735 based mobo (like the
> ECS K7S5A series). It looks like RBR crashes and BURNS on those
> components.
One of my PCs has an ECS K7S5A mobo in it (cheap but still not good
value imo) running Win2k. I'll give it a go & see how it gets on. These
mobos don't like having more than one DIMM installed, with SDRAM at any
rate.
Malc.
"Malc" <[email hidden]> wrote in message
news:414600b9$0$41970$[email hidden]...
These
> mobos don't like having more than one DIMM installed, with SDRAM atany
> rate.
Just tried it & it works fine, although the framerate was pretty poor on
an XP2000 & GF4200 at 1024x768 with full details. I didn't bother to try
different settings to improve the framerate, but it worked fine. This PC
has a SBlive value in it too btw.
Grab yourself a copy of Win2k & dual boot Uwe ;-)
Malc.
Quoted text (9 lines)
> "Uwe Sch�rkamp" <[email hidden]> wrote in message > news:[email hidden]... > > > Hi Richard, make sure you don't have a SiS 735 based mobo (like the > > ECS K7S5A series). It looks like RBR crashes and BURNS on those > > components. > > One of my PCs has an ECS K7S5A mobo in it (cheap but still not good > value imo) running Win2k. I'll give it a go & see how it gets on.> Grab yourself a copy of Win2k & dual boot Uwe ;-)
That's the thing, the MSFF gameport ties me to W98SE. The thing's so damned
reliable!
Also there's nothing else out there with optics on the wheel, which is a
huge plus.
R.
On Mon, 13 Sep 2004 23:22:50 +0100, Malc wrote:
> Grab yourself a copy of Win2k & dual boot Uwe ;-)
Hi Malc, that won't help because even if should get RBR to run on my
rig, it won't recognize the TSW2 pedals (brake reversed, throttle at
half-on all the time). I tested that yesterday on my son's machine
which runs RBR just fine. I had a similar problem with RT early on
until some kind soul mentioned an ini file to hack in order to get RT
to work with TSW pedals.
Also, for some strange reason the idea of giving MS even more money than
they already have does not seem appealing to me *at all* ;-)
Cheers & thanks for testing RBR on your machine!
Uwe
--
mail replies to Uwe at schuerkamp dot de ( yahoo address is spambox)
Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/
Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E)
GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61
"Uwe Sch�rkamp" <[email hidden]> wrote in message
news:[email hidden]...
Bit of an extreme solution for one sim but you could try reversing the
polarity of your pedal pots (swap the wires round). The other sims
/should/ be able to handle the change, although of course that won't
help your combined axis problem. Have you cleared the 'accellerate and
brake' setting in rbr by pressing delete, and just assigning the
'accellerate' and 'brake' controls separately?
> Also, for some strange reason the idea of giving MS even more moneythan
> they already have does not seem appealing to me *at all* ;-)
Unlike XP, Win2k does not need to be activated, which is the main reason
I've not got XP on any of my PC's, but it will do pretty well anything
XP will do but without the baby talk. PM me if decide to go that way,
although win98 /should/ work ;-)
> Cheers & thanks for testing RBR on your machine!
np, Malc.
Quoted text (10 lines)
> On Mon, 13 Sep 2004 23:22:50 +0100, Malc wrote: > > > Grab yourself a copy of Win2k & dual boot Uwe ;-) > > Hi Malc, that won't help because even if should get RBR to run on my > rig, it won't recognize the TSW2 pedals (brake reversed, throttle at > half-on all the time). I tested that yesterday on my son's machine > which runs RBR just fine. I had a similar problem with RT early on > until some kind soul mentioned an ini file to hack in order to get RT > to work with TSW pedals.On Tue, 14 Sep 2004 12:54:01 +0100, Malc wrote:
> Bit of an extreme solution for one sim but you could try reversing the
> polarity of your pedal pots (swap the wires round). The other sims
> /should/ be able to handle the change, although of course that won't
> help your combined axis problem.
I already rewired them back in the f12k days when I was having problems
with *that* sim as you may recall. ;-) Even if I should rewire the
brake axis, that would most likely not solve the "gas is half on"
problem at the slightest touch of the pedal. It's not so bad that it's
half on when I touch the throttle, but it *stays* at half on even if I
take my foot off the pedal. Then again, I did not spend much time with
it at my son's machine last night because I just wanted to check
wether the wheel would work at all.
> Have you cleared the 'accellerate and
> brake' setting in rbr by pressing delete, and just assigning the
> 'accellerate' and 'brake' controls separately?
>
Yep, I did, because I'd read that here before.
> Unlike XP, Win2k does not need to be activated, which is the main reason
> I've not got XP on any of my PC's, but it will do pretty well anything
> XP will do but without the baby talk. PM me if decide to go that way,
> although win98 /should/ work ;-)
Thanks for your support! While I might get a "valid" win2k license
from work at no cost at all, I am a bit hesitant to "upgrade" my
machine just to be able to start RBR, and with the axis problem left I
think I'll shelve the game for now and wait for the patch (any news if
there's even going to be one?), unless Amazon.de agree to take it back
for a refund (haven't from them yet).
Does w2k have gameport support or will I need to upgrade the TSW2 with
a usb converter and new pots?
cheers & all the best,
uwe
--
mail replies to Uwe at schuerkamp dot de ( yahoo address is spambox)
Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/
Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E)
GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61
> Does w2k have gameport support or will I need to upgrade the TSW2 with
> a usb converter and new pots?
>
Upgraded the race PC from win98se to win2k a few months ago and the gameport on
the SBLive actually works better (more resolution). So far no regrets making
the switch.
"Upgrading" to XP on the other hand... ;-)
Ken
PS what bios did you install on the K7S5A? Would be good to know if RBR is ever
released over here.
Well UWE,
I read your above, (where you patched the bios and game now runs in 98,
& assumed you would keep it) so I am trying sendit.com
PS (sting32) & Plowboy is same person (me) just different locations, :P
I went to sendit.com
Uwe Sch�rkamp wrote:
Quoted text (43 lines)
> On Tue, 14 Sep 2004 12:54:01 +0100, Malc wrote: > >> Bit of an extreme solution for one sim but you could try reversing >> the polarity of your pedal pots (swap the wires round). The other >> sims /should/ be able to handle the change, although of course that >> won't help your combined axis problem. > > I already rewired them back in the f12k days when I was having > problems with *that* sim as you may recall. ;-) Even if I should > rewire the brake axis, that would most likely not solve the "gas is > half on" problem at the slightest touch of the pedal. It's not so bad > that it's half on when I touch the throttle, but it *stays* at half > on even if I take my foot off the pedal. Then again, I did not spend > much time with it at my son's machine last night because I just > wanted to check wether the wheel would work at all. > > >> Have you cleared the 'accellerate and >> brake' setting in rbr by pressing delete, and just assigning the >> 'accellerate' and 'brake' controls separately? >> > > Yep, I did, because I'd read that here before. > > >> Unlike XP, Win2k does not need to be activated, which is the main >> reason I've not got XP on any of my PC's, but it will do pretty well >> anything XP will do but without the baby talk. PM me if decide to go >> that way, although win98 /should/ work ;-) > > Thanks for your support! While I might get a "valid" win2k license > from work at no cost at all, I am a bit hesitant to "upgrade" my > machine just to be able to start RBR, and with the axis problem left I > think I'll shelve the game for now and wait for the patch (any news if > there's even going to be one?), unless Amazon.de agree to take it back > for a refund (haven't from them yet). > > Does w2k have gameport support or will I need to upgrade the TSW2 with > a usb converter and new pots? > > cheers & all the best, > > uwe
"Uwe Sch�rkamp" wrote:
The answer for me was to calibrate the wheel in control panel with half gas
on as the centre point. This resolved RBR going to half gas at the slightest
touch.
Seems a bit bizarre but the pedals calibrate perfectly this way.
GPL just works perfectly whatever I do...
Cheers
Tony
Quoted text (8 lines)
> I already rewired them back in the f12k days when I was having problems > with *that* sim as you may recall. ;-) Even if I should rewire the > brake axis, that would most likely not solve the "gas is half on" > problem at the slightest touch of the pedal. It's not so bad that it's > half on when I touch the throttle, but it *stays* at half on even if I > take my foot off the pedal. Then again, I did not spend much time with > it at my son's machine last night because I just wanted to check > wether the wheel would work at all.> Can anyone tell me how well it will run with:
>
> AMD 2400+, 512 RAM, Win98SE, NVidia Ti4200, MSFF gameport wheel.
You'll be running at 1024x768x16 with shadow disabled. Mind you 1024x768
in RBR looks much better than LFS or F1C at the same resolution. I think
the GF4 has finally met it's match for sim-racing.
On Tue, 14 Sep 2004 13:54:05 -0500, Plowboy2 wrote:
Yes, this one is a definite keeper, and I hope it'll run out of the
box on your rig. A more than worthy sucessor to RT plus the added
"mod-a-bility", I think we can expect many fun things to appear for
this one in the future (once I get my brake pedal to work, will try
Tony's suggestion when I get the chance ;-)
Cheers & enjoy RBR,
uwe
--
mail replies to Uwe at schuerkamp dot de ( yahoo address is spambox)
Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/
Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E)
GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61
Quoted text (7 lines)
> Well UWE, > > I read your above, (where you patched the bios and game now runs in 98, > & assumed you would keep it) so I am trying sendit.com > > PS (sting32) & Plowboy is same person (me) just different locations, :P >On Tue, 14 Sep 2004 17:44:19 GMT, Ken MacKay wrote:
> PS what bios did you install on the K7S5A? Would be good to know if RBR is ever
> released over here.
Hi Ken,
version 030811 worked just fine. Cheers, uwe
--
mail replies to Uwe at schuerkamp dot de ( yahoo address is spambox)
Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/
Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E)
GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61
"Plowboy2" <stingre.removethis_@yahoo!.removeit> wrote in message news:<h7H1d.968$iK2.604@lakeread08>...
Win 2000 sees the game port just fine here on my TSW . I have the
rockfire thingy and its a pile of poop IMO . Good Pots are a must with
Win 2k and I would use 100K pots . WinXP ?? Why bother ? its just 2000
with more garbage to slow ya down . I would run 98 before I would run
XP
Quoted text (52 lines)
> Well UWE, > > I read your above, (where you patched the bios and game now runs in 98, > & assumed you would keep it) so I am trying sendit.com > > PS (sting32) & Plowboy is same person (me) just different locations, :P > > I went to sendit.com > Uwe Sch�rkamp wrote: > > On Tue, 14 Sep 2004 12:54:01 +0100, Malc wrote: > > > >> Bit of an extreme solution for one sim but you could try reversing > >> the polarity of your pedal pots (swap the wires round). The other > >> sims /should/ be able to handle the change, although of course that > >> won't help your combined axis problem. > > > > I already rewired them back in the f12k days when I was having > > problems with *that* sim as you may recall. ;-) Even if I should > > rewire the brake axis, that would most likely not solve the "gas is > > half on" problem at the slightest touch of the pedal. It's not so bad > > that it's half on when I touch the throttle, but it *stays* at half > > on even if I take my foot off the pedal. Then again, I did not spend > > much time with it at my son's machine last night because I just > > wanted to check wether the wheel would work at all. > > > > > >> Have you cleared the 'accellerate and > >> brake' setting in rbr by pressing delete, and just assigning the > >> 'accellerate' and 'brake' controls separately? > >> > > > > Yep, I did, because I'd read that here before. > > > > > >> Unlike XP, Win2k does not need to be activated, which is the main > >> reason I've not got XP on any of my PC's, but it will do pretty well > >> anything XP will do but without the baby talk. PM me if decide to go > >> that way, although win98 /should/ work ;-) > > > > Thanks for your support! While I might get a "valid" win2k license > > from work at no cost at all, I am a bit hesitant to "upgrade" my > > machine just to be able to start RBR, and with the axis problem left I > > think I'll shelve the game for now and wait for the patch (any news if > > there's even going to be one?), unless Amazon.de agree to take it back > > for a refund (haven't from them yet). > > > > Does w2k have gameport support or will I need to upgrade the TSW2 with > > a usb converter and new pots? > > > > cheers & all the best, > > > > uwe@63.223.5.254...
That'll do for me! Any idea of frame rate?
R.
Quoted text (7 lines)
> > Can anyone tell me how well it will run with: > > > > AMD 2400+, 512 RAM, Win98SE, NVidia Ti4200, MSFF gameport wheel. > > You'll be running at 1024x768x16 with shadow disabled. Mind you 1024x768 > in RBR looks much better than LFS or F1C at the same resolution. I think > the GF4 has finally met it's match for sim-racing.@63.223.5.254...
That'll do for me! Any idea of frame rate?
R.
>> You'll be running at 1024x768x16 with shadow disabled. Mind you
>> 1024x768 in RBR looks much better than LFS or F1C at the same
>> resolution. I think the GF4 has finally met it's match for
>> sim-racing.
>
> That'll do for me! Any idea of frame rate?
I don't know the exact number, but let's just say stutter free and very
smooth. Going up to 1280x1024x16 causes a jerk every 2-3 seconds, enough
to really screw up your concentration. By all means get the game, it is a
lot of fun.
Johannes Climacus wrote:
www.fraps.com is your frame rate friend.
Quoted text (12 lines)
>>>You'll be running at 1024x768x16 with shadow disabled. Mind you >>>1024x768 in RBR looks much better than LFS or F1C at the same >>>resolution. I think the GF4 has finally met it's match for >>>sim-racing. >> >>That'll do for me! Any idea of frame rate? > > > I don't know the exact number, but let's just say stutter free and very > smooth. Going up to 1280x1024x16 causes a jerk every 2-3 seconds, enough > to really screw up your concentration. By all means get the game, it is a > lot of fun.Hi sim racers
Also I bought the RBR after having read so many good
comments about the program here. And yes, it seems
and feels very good, indeed! I have a new pc, strong
enough for that sim.
But, but, RBR feels very realistic, and I came to think:
Is the rally really so boring a sport; you just drive
too fast in public roads alone! ;-)
Nothing to compare to racing side by side with your fellow
competitors!
Is there any way to "misuse" RBR so that you could drive
also thos "real races"? For example Rally Trophy has an
option for that.
Arto
--


































