RBR Patch 1.01 released.

Fixes lots of stuff. http://www.bhmotorsports.com/download/7405 -- Remove only one zero to reply

Fixes lots of stuff. http://www.bhmotorsports.com/download/7405 -- Remove only one zero to reply

Wheels move now, in existing replays too. Andi. -- Remove only one zero to reply "Andi Cole" <[email hidden]> wrote in message news:415310a9$0$64088$[email hidden]... > Fixes lots of stuff. > > http://www.bhmotorsports.com/download/7405 > > -- > > Remove only one zero to reply > > >

"Andi Cole" <[email hidden]> wrote in message news:415310a9$0$64088$[email hidden]... > Fixes lots of stuff. > > http://www.bhmotorsports.com/download/7405 Thanks for the link. Just looked on the rbr official site & there's no mention of it though. Malc.

In article <41531cd8$0$94740$[email hidden]>, [email hidden] says...

Quoted text (10 lines)

> "Andi Cole" <[email hidden]> wrote in message > news:415310a9$0$64088$[email hidden]... > > Fixes lots of stuff. > > > > http://www.bhmotorsports.com/download/7405 > > Thanks for the link. Just looked on the rbr official site & there's no > mention of it though. > > Malc.

http://www.sci.co.uk/games/downloads/ -- _________________________ Todd Walker http://www.toddwalker.net _________________________

"Andi Cole" <[email hidden]> schreef in bericht news:415310a9$0$64088$[email hidden]... > Fixes lots of stuff. > > http://www.bhmotorsports.com/download/7405 Still doesn't fix the Radeon 9000/9200 flashing scenery bug :^( --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.766 / Virus Database: 513 - Release Date: 17-9-2004

I think some ATI bugs have been stated will have to be a Catalyst driver update. Andi. -- Remove only one zero to reply "Milan Poll�" <[email hidden]> wrote in message news:civ8pk$kmb$[email hidden]... > > "Andi Cole" <[email hidden]> schreef in bericht > news:415310a9$0$64088$[email hidden]... > > Fixes lots of stuff. > > > > http://www.bhmotorsports.com/download/7405 > > Still doesn't fix the Radeon 9000/9200 flashing scenery bug :^( > > > > --- > Outgoing mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.766 / Virus Database: 513 - Release Date: 17-9-2004 > >

"Andi Cole" <[email hidden]> schreef in bericht news:41532d4f$0$80627$[email hidden]... > I think some ATI bugs have been stated will have to be a Catalyst driver > update. Ah, yes, that could very well be the case. I'll just wait for the Catalyst 5.0 Omega drivers for my laptop then, hopefully that will fix the problem. --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.766 / Virus Database: 513 - Release Date: 17-9-2004

"Todd Walker" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (9 lines)

> In article <41531cd8$0$94740$[email hidden]>, > [email hidden] says... > > "Andi Cole" <[email hidden]> wrote in message > > news:415310a9$0$64088$[email hidden]... > > > Fixes lots of stuff. > > > > > > http://www.bhmotorsports.com/download/7405 > > > > Thanks for the link. Just looked on the rbr official site & there's

no > > mention of it though. > > > > Malc. > > http://www.sci.co.uk/games/downloads/ Thanks Todd, that looks like the same page the bhm link took me to, but I meant this site: http://www.richardburnsrally.com/ Malc.

According to the list, it doesn't look like it addresses the pedal configuration problems with TSW peds and other higher-end controllers. 8-( Andi Cole wrote:

Quoted text (7 lines)

> Fixes lots of stuff. > > http://www.bhmotorsports.com/download/7405 > > -- > > Remove only one zero to reply

According to the list, it doesn't look like it addresses the pedal configuration problems with TSW peds and other higher-end controllers. 8-(

Quoted text (7 lines)

> Fixes lots of stuff. > http://www.bhmotorsports.com/download/7405 > -- > Remove only one zero to reply

well, my sounds better, I feel a bit more of the 'rough road' sensation through the wheel, wheels turn in replay, and nothing is stuffed except the windscreen cracks which I hated in the first place and drive bumper cam anyway... Charlie

Will this patch still require the DVD in the drive? If so, is there a no-cd /dvd patch out there somewhere? Thanks, uwe -- mail replies to Uwe at schuerkamp dot de ( yahoo address is spambox) Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/ Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E) GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61

Uwe Sch�rkamp wrote: > > Will this patch still require the DVD in the drive? If so, is there a > no-cd /dvd patch out there somewhere? it appears sci applied their own nodvd patch to it before shipping the patch ;) no need to worry... Charlie

On Fri, 24 Sep 2004 18:31:33 +1000, Charlie wrote:

Quoted text (10 lines)

> Uwe Schï¿œrkamp wrote: >> >> Will this patch still require the DVD in the drive? If so, is there a >> no-cd /dvd patch out there somewhere? > > it appears sci applied their own nodvd patch to it before shipping the > patch ;) > no need to worry... > > Charlie

Cool, that's great news! Thanks Charlie. All the best, uwe -- mail replies to Uwe at schuerkamp dot de ( yahoo address is spambox) Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/ Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E) GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61

So it does, I didn't notice that. Andi. -- Remove only one zero to reply "Charlie" <[email hidden]> wrote in message news:[email hidden]... > Uwe Sch�rkamp wrote: > > > > Will this patch still require the DVD in the drive? If so, is there a > > no-cd /dvd patch out there somewhere? > > it appears sci applied their own nodvd patch to it before shipping the > patch ;) > no need to worry... > > Charlie

BRH, I noticed at home I see more replies, than I do at work (different isps..) so have you tried any of the 4 methods of fixing this problem? here's what I been keeping notes on, for myself... as I dont have RBR (shipper was out of stock until today)... 1 DXtweak2 some settings in there to change ranges and or axis... 2 make sure you select the correct control options in RBR (seperate) 3 calibrating in WINDOWS with your foot either half pressed on the brakes, or full on (the whole calibrating time) 4 (not sure about TSW, I dont have one) controller's controlpane app, switch axis directions setting 5 swap the 2 wire's positions, on the Brake potentiometer... not so hard.

Quoted text (15 lines)

> According to the list, it doesn't look like it addresses the pedal > configuration problems with TSW peds and other higher-end controllers. > 8-( > > > > Andi Cole wrote: > >> Fixes lots of stuff. >> >> http://www.bhmotorsports.com/download/7405 >> >> -- >> >> Remove only one zero to reply

I tried numbers 1 and 2. The version of DXTweak 2 that I have doesn't allow you to reverse axes. Perhaps there's another version floating around that I can download? I am quite sure that I have selected the correct controller options in RBR, since I _can_ get my MOMO pedals to work. Option #4 is moot as the TSW pedals do not have a control panel app. I tried #3, but didn't keep the ped at halfway down thru the entire calibration, as at some point the calibration routine asks you to depress the pedal. I'll try this though. #5 may well work, but I just haven't had the gumption to do it, as I'm worried that it will screw up my other racing sims. Plowboy2 wrote:

Quoted text (31 lines)

> BRH, > > I noticed at home I see more replies, than I do at work (different isps..) > so have you tried any of the 4 methods of fixing this problem? > > here's what I been keeping notes on, for myself... as I dont have RBR > (shipper was out of stock until today)... > > 1 DXtweak2 some settings in there to change ranges and or axis... > 2 make sure you select the correct control options in RBR (seperate) > 3 calibrating in WINDOWS with your foot either half pressed on the brakes, > or full on (the whole calibrating time) > 4 (not sure about TSW, I dont have one) controller's controlpane app, switch > axis directions setting > 5 swap the 2 wire's positions, on the Brake potentiometer... not so hard. > > > According to the list, it doesn't look like it addresses the pedal > > configuration problems with TSW peds and other higher-end controllers. > > 8-( > > > > > > > > Andi Cole wrote: > > > >> Fixes lots of stuff. > >> > >> http://www.bhmotorsports.com/download/7405 > >> > >> -- > >> > >> Remove only one zero to reply

I tried numbers 1 and 2. The version of DXTweak 2 that I have doesn't allow you to reverse axes. Perhaps there's another version floating around that I can download? I am quite sure that I have selected the correct controller options in RBR, since I _can_ get my MOMO pedals to work. Option #4 is moot as the TSW pedals do not have a control panel app. I tried #3, but didn't keep the ped at halfway down thru the entire calibration, as at some point the calibration routine asks you to depress the pedal. I'll try this though. #5 may well work, but I just haven't had the gumption to do it, as I'm worried that it will***up my other racing sims.

Quoted text (30 lines)

> BRH, > I noticed at home I see more replies, than I do at work (different isps..) > so have you tried any of the 4 methods of fixing this problem? > here's what I been keeping notes on, for myself... as I dont have RBR > (shipper was out of stock until today)... > 1 DXtweak2 some settings in there to change ranges and or axis... > 2 make sure you select the correct control options in RBR (seperate) > 3 calibrating in WINDOWS with your foot either half pressed on the brakes, > or full on (the whole calibrating time) > 4 (not sure about TSW, I dont have one) controller's controlpane app, switch > axis directions setting > 5 swap the 2 wire's positions, on the Brake potentiometer... not so hard. > > According to the list, it doesn't look like it addresses the pedal > > configuration problems with TSW peds and other higher-end controllers. > > 8-( > >> Fixes lots of stuff. > >> http://www.bhmotorsports.com/download/7405 > >> -- > >> Remove only one zero to reply

Option #3 didn't work either. The axes is reversed. BRH wrote:

Quoted text (47 lines)

> I tried numbers 1 and 2. The version of DXTweak 2 that I have doesn't allow you > to reverse axes. Perhaps there's another version floating around that I can > download? I am quite sure that I have selected the correct controller options > in RBR, since I _can_ get my MOMO pedals to work. > > Option #4 is moot as the TSW pedals do not have a control panel app. > > I tried #3, but didn't keep the ped at halfway down thru the entire calibration, > as at some point the calibration routine asks you to depress the pedal. I'll > try this though. > > #5 may well work, but I just haven't had the gumption to do it, as I'm worried > that it will screw up my other racing sims. > > Plowboy2 wrote: > > > BRH, > > > > I noticed at home I see more replies, than I do at work (different isps..) > > so have you tried any of the 4 methods of fixing this problem? > > > > here's what I been keeping notes on, for myself... as I dont have RBR > > (shipper was out of stock until today)... > > > > 1 DXtweak2 some settings in there to change ranges and or axis... > > 2 make sure you select the correct control options in RBR (seperate) > > 3 calibrating in WINDOWS with your foot either half pressed on the brakes, > > or full on (the whole calibrating time) > > 4 (not sure about TSW, I dont have one) controller's controlpane app, switch > > axis directions setting > > 5 swap the 2 wire's positions, on the Brake potentiometer... not so hard. > > > > > According to the list, it doesn't look like it addresses the pedal > > > configuration problems with TSW peds and other higher-end controllers. > > > 8-( > > > > > > > > > > > > Andi Cole wrote: > > > > > >> Fixes lots of stuff. > > >> > > >> http://www.bhmotorsports.com/download/7405 > > >> > > >> -- > > >> > > >> Remove only one zero to reply

Option #3 didn't work either. The axes is reversed.

Quoted text (47 lines)

> I tried numbers 1 and 2. The version of DXTweak 2 that I have doesn't allow you > to reverse axes. Perhaps there's another version floating around that I can > download? I am quite sure that I have selected the correct controller options > in RBR, since I _can_ get my MOMO pedals to work. > Option #4 is moot as the TSW pedals do not have a control panel app. > I tried #3, but didn't keep the ped at halfway down thru the entire calibration, > as at some point the calibration routine asks you to depress the pedal. I'll > try this though. > #5 may well work, but I just haven't had the gumption to do it, as I'm worried > that it will***up my other racing sims. > > BRH, > > I noticed at home I see more replies, than I do at work (different isps..) > > so have you tried any of the 4 methods of fixing this problem? > > here's what I been keeping notes on, for myself... as I dont have RBR > > (shipper was out of stock until today)... > > 1 DXtweak2 some settings in there to change ranges and or axis... > > 2 make sure you select the correct control options in RBR (seperate) > > 3 calibrating in WINDOWS with your foot either half pressed on the brakes, > > or full on (the whole calibrating time) > > 4 (not sure about TSW, I dont have one) controller's controlpane app, switch > > axis directions setting > > 5 swap the 2 wire's positions, on the Brake potentiometer... not so hard. > > > According to the list, it doesn't look like it addresses the pedal > > > configuration problems with TSW peds and other higher-end controllers. > > > 8-( > > >> Fixes lots of stuff. > > >> http://www.bhmotorsports.com/download/7405 > > >> -- > > >> Remove only one zero to reply

"Andi Cole" <[email hidden]> wrote in message news:415310a9$0$64088$[email hidden]...

Quoted text (10 lines)

> Fixes lots of stuff. > > http://www.bhmotorsports.com/download/7405 > > -- > > Remove only one zero to reply > > >

Well it didn't fix my configuration... There was nothing wrong with it in the first place. I could use my ATI Radeon without any problems, sound was ok, my thrustmaster FFB was working ok But I decided to install this patch anyway (my way wheels wern't turning in the replays) Now it has crashed several times... So I decided to upgrade my FFB drivers like they said in the readme of the patch So I removed the old ones, but that was a hard thing to do. It kept automatically reinstalling my wheel. So I decided to remove the drivers manually. And I removed all immersion .dlls from my windows\system32\drivers directory..... (I tought they were part of the drivers) Bad idea !!! I can't install any driver now anymore because it is always asking for immcpl.dll (and probably the rest of the drivers) during the installation progress. Ok, So I went to the immersion site, downloaded the latest Immersion desktop drivers... But still no .dll files... Can someone point me to a place where I can get those files back ???? Any help would be greatly appreciated.... TIA, Jimster

Are the dll's not still in your wastebasket. If you're using XP you could try a system restore. Andi. -- Remove only one zero to reply "Jimster" <[email hidden]> wrote in message news:LW85d.256465$[email hidden]... > > "Andi Cole" <[email hidden]> wrote in message > news:415310a9$0$64088$[email hidden]... > > Fixes lots of stuff. > > > > http://www.bhmotorsports.com/download/7405 > > > > -- > > > > Remove only one zero to reply > > > > > > > > Well it didn't fix my configuration... There was nothing wrong with it in > the first place. > I could use my ATI Radeon without any problems, sound was ok, my > thrustmaster FFB was working ok > But I decided to install this patch anyway (my way wheels wern't turning in > the replays) > > Now it has crashed several times... So I decided to upgrade my FFB drivers > like they said in the readme of > the patch > So I removed the old ones, but that was a hard thing to do. It kept > automatically reinstalling my wheel. > So I decided to remove the drivers manually. And I removed all immersion > .dlls from my windows\system32\drivers directory..... > (I tought they were part of the drivers) Bad idea !!! > > I can't install any driver now anymore because it is always asking for > immcpl.dll (and probably the rest of the drivers) > during the installation progress. > Ok, So I went to the immersion site, downloaded the latest Immersion desktop > drivers... But still no .dll files... > Can someone point me to a place where I can get those files back ???? > > Any help would be greatly appreciated.... > > TIA, > > Jimster > >

done a google for immcpl? try going to run and type "sfc /scannow" then wait while it checks all the 'important' files on your system to see if they're 'correct' and will replace them if needed, and if they came with xp. Charlie

Thanks for the suggestions I did google for, but apparently not much people looking for this file. Apparently it is part of XP, The files were alreadyt from my pc, (bad habit of using shift - del to delete files) Yesterday I found a ftp site of immersion where I found an installation package which used these files. So I'm up and running again. Now how I can verify the version number of my thrustmaster wheel ? It always sees that the driver comes from immersion, and not thrustmaster. Is this normal ? Anyway RBR runs fine again, and doesn't crash anymore. And that's all that matters.... ;-) Thanks for the help, Cheers, Jimster "Charlie" <[email hidden]> wrote in message news:[email hidden]... > done a google for immcpl? > try going to run and type "sfc /scannow" then wait while it checks all > the 'important' files on your system to see if they're 'correct' and > will replace them if needed, and if they came with xp. > > Charlie

Jimster wrote:

Quoted text (8 lines)

> Well it didn't fix my configuration... There was nothing wrong with > it in the first place. I could use my ATI Radeon without any > problems, sound was ok, my thrustmaster FFB was working ok But I > decided to install this patch anyway (my way wheels wern't turning in > the replays) > > Now it has crashed several times... So I decided to upgrade my FFB > drivers

I don't have an answer to your main question, but I ended up in the same boat you were...the game ran just fine for me except for the ATI poly-tearing issue with AF/AA on, so I figured I'd give it an install. Suddenly, started crashing every time I played, usually taking the whole machine with it. Since it has a no-dvd patch already in it, I just left the DVD I was watching earlier in the drive. I took it out and left the drive empty, and now it hasn't crashed at all. If anyone else is having crashes when they didn't before, that might be the culprit...it certainly was in my case.