>Any suggestion on a setup there? Right now the best lap I am able to pull is
>156.xxx. In an effort to get more speed I have the Stagger set to 1.5. I am
>trying to maintain something over 120mph in turn 1. In turn 2 I can maintain
>about 145mph and turn 3 about 120's to 130's depending on how I enter the
>turn, but it seems that everytime I touch the break there I break loose.
>Also I can't keep the rear tire temp down.
I'll soon be posting a series of car setups (racing setups) along with
replays of laps and driving style write-ups. I'll post here where the
web site will be.
As for Pocono, you should not drop below 128mph around turn 1, 138mph
should be the low point around turn 2 (the easiest), and turn 3 should
be handled at 134mph or greater. Assuming you brake where you have to
(and my site will give you this info), you will get lap speeds of
162mph.
Can't recall offhand about tire wear, but tighten up your car and
soften the front shocks to reduce eratic weaving whenever you brake.
Also, don't lean on your brakes continuously, but tap and release a
few times as you approach each corner. This reduces significantly the
amount of fishtailing you get.
Hope this helps,
Bill.
