I'm using GPperf 2.0 and GPanyl 5.0 with F1PC.
When I use the anaylser on a generated perf file, there is no steering
data displayed, it just appears as a straight line.
Has anybody got any ideas on whats wrong.
Barry Evans
---------------------------------------------------------------------
Dr Barry Evans Madge Networks Ltd.
Sefton Park
Phone : +44 1753 661436 Stoke Poges
Fax : +44 1753 661011 Slough SL2 4JS
You've got to use GPperf 4.0, 2.0 doesn't generate steering/... data.
---------------------------------------------------------------------------
http://www.uni-giessen.de/~gcg4
GeekCode v2.1: GM d H s:->s g+(?) p?(1) au- a20 w(++) v(+) C+(++) UA+>++ US
D(-) B? e+(*) u+ h! f(+) r- n+ y? Fnord.
---------------------------------------------------------------------------
>I'm using GPperf 2.0 and GPanyl 5.0 with F1PC.
GPanyl 5.0 does not exist; 4.1 is the latest.
If you play with the keyboard, you won't get much useful data. Three
positions - left, center, right. (Can a keyboard driver confirm that it
works like that?) I've had no problems with a joystick. Perhaps you,
should check the message when you load GPPerf to make sure it really is
2.0 and not 1.1 or 1.2?
-- Gizmo
http://www.mal.com/~dgymer/
--
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Launchpad is an experimental internet BBS. The views of its users do not
necessarily represent those of UNC-Chapel Hill, OIT, or the SysOps.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
You confusing GPPerf and GPAnalyser. GPPerf 2.0 is the latest and DOES
generate steering, gas/brake, and position information.
You also need GPAnalyser 4.0 or 4.1 to handle GPPerf 2.0 logs.
-- Gizmo
http://www.mal.com/~dgymer/
--
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Launchpad is an experimental internet BBS. The views of its users do not
necessarily represent those of UNC-Chapel Hill, OIT, or the SysOps.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
>>You've got to use GPperf 4.0, 2.0 doesn't generate steering/... data.
>You confusing GPPerf and GPAnalyser. GPPerf 2.0 is the latest and DOES
>generate steering, gas/brake, and position information.
>You also need GPAnalyser 4.0 or 4.1 to handle GPPerf 2.0 logs.
I think that's the problem. Earlier versions of GPAnalyser cannot display
steering, gas/brake and position information, just as the latest version
of GPAnalyzer cannot display the information if the .prf files are created
with an earlier version of GPPerf.
As Dave said, both GPPerf 2.0 and GPAnalyzer 4.1 are needed to generate
_and_ display steering, gas/brake and position information.
Another problem could be that you _are_ using these versions, but that
you're comparing old .prf files with new ones, or that you've generated
two .prf files which are equal in steering or gas/brake. I've come
across these situations myself quite a few times.
--
Imar de Vries | 'Those crazy Ferrari fans sure make a lot of noise...
LFRS - Patrim #61 | (dramatic pause)... more than the Peugeot that I drive.'
- Forza Ferrari - | - Hakkinen, Formula One driver
Hello Imar!
i> As Dave said, both GPPerf 2.0 and GPAnalyzer 4.1 are needed to generate
i> _and_ display steering, gas/brake and position information.
i> Another problem could be that you _are_ using these versions, but that
i> you're comparing old .prf files with new ones, or that you've generated
i> two .prf files which are equal in steering or gas/brake. I've come
i> across these situations myself quite a few times.
I have the same problem. I _am_ using GPPerf 2.0 and GPAnalyzer 4.1. And I can
see gas/brakes graphs to compare them, but I cannot see steering - just
straight line. And I am using keyboard to drive. Both perfs are written with
GPPerf 2.0, and I _am_ sure that steering there is different.
Maybe it is really so that GPPerf writes steering log only if you use joystick?
Best regards,
Ervins Reinverts
[Team OS/2]
--- GoldED/2 2.50.Beta5+
I just examined some of Ivanhoe's .prf files and it appears that you
are correct, no steering data is logged if the keyboard is being used.
Gas/brakes are logged. Any mouse drivers know if it logs mouse data?
Chisa
-- Gizmo
http://www.mal.com/~dgymer/
--
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Launchpad is an experimental internet BBS. The views of its users do not
necessarily represent those of UNC-Chapel Hill, OIT, or the SysOps.
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
