Howdy!!
A friend of mine, who doesn't have access to the net, has just bought
himself a 486DX2-50. He also bought ICR V1.01 with it. The game installed
Ok, but when it came to loading the game, it would only run through the
intro at the start (the cars driving down the track) for about a second
before it would crash, and the screen would go up the fritz.
Amongst the jibberish could be read things about granules, and the pathname
for the Toronto track.
We took the computer and the game down to the local computer store, where
the problem replicated itself. We tried it on two other computers (a
486SX-33 and a 486DX2-66, deleting it each time we finished) and on both
these machines it worked perfectly. Neither of these machines were fitted
with sound cards, and my friends DX2-50 doesn't either.
I was just wondering if any of you out there in netland had any idea what
could be wrong.
Thanks,
Cameron..
--
_________ ___ ___
/ / / / / | BAYERISCHE MOTOREN WERKE -
/__/__/__/ /__/|__/|__| ** THE ULTIMATE DRIVING MACHINE **
<<A friend of mine, who doesn't have access to the net, has just bought
himself a 486DX2-50. He also bought ICR V1.01 with it. The game installed
Ok, but when it came to loading the game, it would only run through the
intro at the start (the cars driving down the track) for about a second
before it would crash, and the screen would go up the fritz.
I'm not sure what the problem is exactly, but here are a few suggestion
that may (or may not make it run smoother). By all means get a hold of
the most recent patch (1.05 I think). While IndyCar will run with 4 megs,
it can be a little undependable even on a fast machine [I have the same
kind]. The game positively loves 8 megs and trash your EMS (if you're
using any) and most TSRs. XMS and a fairly clean autoexec.bat and
config.sys have cleared up most problems for me. Hope this is at least a
little help. I'm new in Netland myself.
Myron Estelle
Howdieee!
How much ram do you have? ICR needs atleast 4 megs to run. Also if you
are running DOS 6.0 or later, use the F8 at start up, and load only
Himen, DOS=umb, and DOS=high.
There is a ICR1.04 update, in various versions (e=european, etc) available
from two ftp sites.
ftp.std.com/pub/vendors/papyrus
and
ftp.didnt.doit.wisc.edu
Also if you have access to Mosaic or Lynx you can use the following:
ftp://ftp.std.com/pub/vendors/papyrus
Good luck
Jack
: Howdy!!
: A friend of mine, who doesn't have access to the net, has just bought
: himself a 486DX2-50. He also bought ICR V1.01 with it. The game installed
: Ok, but when it came to loading the game, it would only run through the
: intro at the start (the cars driving down the track) for about a second
: before it would crash, and the screen would go up the fritz.
: Amongst the jibberish could be read things about granules, and the pathname
: for the Toronto track.
: We took the computer and the game down to the local computer store, where
: the problem replicated itself. We tried it on two other computers (a
: 486SX-33 and a 486DX2-66, deleting it each time we finished) and on both
: these machines it worked perfectly. Neither of these machines were fitted
: with sound cards, and my friends DX2-50 doesn't either.
: I was just wondering if any of you out there in netland had any idea what
: could be wrong.
: Thanks,
: Cameron..
: --
: _________ ___ ___
: / / / / / | BAYERISCHE MOTOREN WERKE -
: /__/__/__/ /__/|__/|__| ** THE ULTIMATE DRIVING MACHINE **
--
** ** ** ***** ** ** ***** *** ***** Jack Durbin
** **** ** ** ** ** ** ** ** ** ** ** Tallahassee, Florida
** ** ** ***** ** ***** ** ** ** **
^^^^^^^
DOS=UMB is only relevant if EMM386.EXE is loaded.
Since ICR uses the Rational Systems DOS extender, no memory
manager is required. So just press F5 at start-up.
Regards,
Mike
--
10 Mount Gardens | Voice: +44 532 675893
Leeds LS17 7QN |
United Kingdom | PGP public key available
I have had the exact same problem. I have indy v1.05, and run a 386dx40 w/ 4
megs & SBPro. I had the game running fine on my previous motherboard, also a
386dx40, but after installing the new one, the games randomly crashes, send my
BIOS header to the screen, and dumps a bunch of other info to the screen in
40x25 mode. *shrug* If anyone has been able to _solve_ this problem, I'd like
to know.
Thanks,
Andy.
as far as i know, the memory manager Dos/4gw -runs Indycar,
Doom, etc..- has compatibility problems with Opti chipset boards, these
are the boards that usually have an AMD CPU in them.
When you run Indycar or Doom -depending on the Dos/4gw version-
you may get errors such as the machine freezing, or 'granule'/'internal
stack' errors.
Solution, well as i had a AMD 386dx40 Opti board, i simply
upgraded to a 486/33 board.
cheers John.
> as far as i know, the memory manager Dos/4gw -runs Indycar,
>Doom, etc..- has compatibility problems with Opti chipset boards, these
>are the boards that usually have an AMD CPU in them.
I've run ICR and DOOM, and Rebel *** (it also uses the DOS/4GW extender)
on my computer and my motherboard has an Opti chipset? I'v also run all
but Rebel *** on an AMD CPU at work (shh, don't tell!!). So I don't
think that's it. Just my $.02 from my experience!
Later,
--------
Darrel Cherry
AFM #184
Howdy once again!!
I followed the suggestion of pressing F5 and F8, but the game still crashed.
So, I headed off to ftp.std.com for version 1.04.
After saving it to disk, I drove straight from uni to my friends place to
try it.
WE saved it under the name of indycar4, to differentiate it from the
original exectuable.
On booting the game from the boot disk, we found that the intro of the cars
driving around Toronto worked perfectly, but when it came to the manual
protection, the troubles started.
Words could be typed in fine, but even though we had entered the correct
word, it would tell us to try again. To make matters worse, it would even
ask for pages that had nothing but pictures or captions that don't form
part of the main text.
As before, any help here would be greatly appreciated.
Thanks,
Cameron..
--
_________ ___ ___
/ / / / / | BAYERISCHE MOTOREN WERKE -
/__/__/__/ /__/|__/|__| ** THE ULTIMATE DRIVING MACHINE **
>driving around Toronto worked perfectly, but when it came to the manual
>protection
Since the manual protection is where it craps out, try using the crack
for it. I've never used it yet, but someone who has can probably email
you the one password that it always asks for if you still can't get it
to work. Good Luck, hope it works.
Here is the crack for version 1.04.........
# WARNING!!
#
#This information is only to be used by legal owners of Indycar
#Racing. It should not be used to pirate the program.
#The patch will cause the same word to be requested every time.
#The word is not listed here, since any legal owner has the
#manual and certainly wouldn't mind looking up just one more
#word. Right? Please do not post the word or give it out to
#people not owning the game.
#
#The patch most likely will not work on any other version. And
#all bets are off if the size, date and CRC do not match what's
#listed below.
#
#---------------------------------------------------------
#Papyrus Indycar Racing version 1.04 (Modem Update)
#
#FILE TO SEARCH: INDYCAR.EXE ORIGINAL FILE SIZE: 742377 DATE:
#
#04-05-94 CRC-32: (from PKUNZIP -v icr104.zip) 1FF74829
#
#SEARCH STRING: E8 EA E1 FD FF CHANGE TO: B8 04 04 00 00
#
#SEARCH STRING: E8 5C 5F FE FF CHANGE TO: B8 04 04 00 00
#
#---------------------------------------------------------
#Henrikki T. Hakkanen DISCLAIMER: In no event shall I be liable
#Voice: +358-0-345 5538 my opinions, even if I have been advised of
#Fax: don't have one the possibility of such damages.
--------
Darrel Cherry
AFM #184
andy (and others), see my post 1396 about this problem, it is to do with
incompatibility with the motherboard that uses a Opti chipset.
c-ya... John.
Cameron:
You probably have 1.04e or something. THat'll***up your manual
protection because the manuals are different in different countries. Try
getting another version of 1.04.
Hope this helps!
--
..........................................................................
Tony Johns | Winston Racing Series
FTP: ftp.netcom.com |-------------------------------------------------
/pub/zyllyx | IndyCar Racing Series #38
--------------------------------------------------------------------------
<<On booting the game from the boot disk, we found that the intro of the
cars
driving around Toronto worked perfectly, but when it came to the manual
protection, the troubles started.
Words could be typed in fine, but even though we had entered the correct
word, it would tell us to try again.>>
This is a problem when you obtain the wrong upgrade file. If using the
American version of the original you need to use the 1.04 patch, for
European English version use the 1.04e patch, for the Spanish version use
the 1.04s patch, etc.
Hope this helps,
Rob
Hmm Papyrus have two versions the US and the European, you need the 1.04E
which has the right codes for the Australian release.
* Origin: A.L.I.E.N. BBS * Sydney Australia * +61-2-743-5871 (999:999/2)
