Is it possible to get around the road courses in any kind of decent
time with the
autoshift and autobrake functions. The car slips all the way into
first if any brake
is applied. Same if I let up on the throttle for too long.
>Is it possible to get around the road courses in any kind of decent
>time with the
>autoshift and autobrake functions. The car slips all the way into
>first if any brake
>is applied. Same if I let up on the throttle for too long.
I do quite well on Longbeach with autoshift ON, but only with autobraking OFF.
The autoshifting helps me to keep from blowing the engine on the downshifts,
but if I use autobraking I lose my major advantage, which is being able to
brake late into the corners and outdo the computer drivers. One of these days
I am going to spend some time on learning to do my own shifting but for now I
pretend that I am running with a F1 automatic transmission ;^)
Good Racing,
- Joao
Subject: Re: Road courses and autoshifting and braking
Date: 16 Jun 94 15:18:05 GMT
>I've tried auto-shifting occationally but find it too restrictive. IMO its
>actually easier with manual shifting as you can use the gears for braking
>and apply the brakes later. This way you slide less and go faster. I
>find it very important how you set up the controls. You have to find out
>what suits you best. I use the stick for steering, accelerator and brakes;
>and the two buttons for gear shift. It's a bit difficult to steer and brake
>at the same time, but I guess you can't have everything :-) As a reference
>I do Long Beach in 54.410 (without any tangling).
The only place uI have used manual shifting is in Indianapolis. In LB I
run
consistenly in the 55s and lower range with Autoshift. My best is
somewhere
in the low 53s range, but with some slight wall contact. I don't think it
makes any difference in LB, although in Laguna it would be very
beneficial at
the left turn before it goes uphill - I am always in 5th or 6th, although
3rd
or 2nd would be best. In Indy I use it to have more torque in turn 2 and
4,
especially when traffic slows me down.
Auto-braking? ehhh no way!
Quoted text (11 lines)
>>Is it possible to get around the road courses in any kind of decent >>time with the >>autoshift and autobrake functions. The car slips all the way into >>first if any brake >>is applied. Same if I let up on the throttle for too long. >I do quite well on Longbeach with autoshift ON, but only with autobraking OFF. >The autoshifting helps me to keep from blowing the engine on the downshifts, >but if I use autobraking I lose my major advantage, which is being able to >brake late into the corners and outdo the computer drivers. One of these days >I am going to spend some time on learning to do my own shifting but for now I >pretend that I am running with a F1 automatic transmission ;^)This is a test.
This is only a test.
Had this been an actual emergency
we would have fled in terror
and you would not have been informed
Quoted text (12 lines)
>I've tried auto-shifting occationally but find it too restrictive. IMO its >actually easier with manual shifting as you can use the gears for braking >and apply the brakes later. This way you slide less and go faster. I >find it very important how you set up the controls. You have to find out >what suits you best. I use the stick for steering, accelerator and brakes; >and the two buttons for gear shift. It's a bit difficult to steer and brake >at the same time, but I guess you can't have everything :-) As a reference >I do Long Beach in 54.410 (without any tangling). >Cheers, >KennethWell, I guess auto-shifting works for everyone except me :-) Gotta try it
out some more, *but* its fun to blow your engine sometimes. Anyway I
did not compare my ICR technique to my long experience as a real-life F1
driver (just kiddin'). I just feel the gearing down in ICR has an ABS
effect. Maybe I just don't know how to apply the right amount of brakes.
Its more like on/off.
Out of curiosity. If you don't use the gears for braking (we are talking
milliseconds here) in real-life when *do* you gear down? You have to be
in the right gear when you reach the apex. And with electronic shifting
you don't have a clutch do you?
1:06:941 here.
Kenneth
Quoted text (7 lines)
|> |> Out of curiosity. If you don't use the gears for braking (we are talking |> milliseconds here) in real-life when *do* you gear down? You have to be |> in the right gear when you reach the apex. And with electronic shifting |> you don't have a clutch do you? |> |>New time this weekend...1:05:639
Stephen's response regarding when you do downshift is right on the mark. The way I look
at it is a two step process with clutch in, gear out, clutch out, blip throttle, clutch in,
gear down, clutch out. You can also do it by matching revs which is clutch in, gear out,
blip throttle to match revs, gear down, clutch out. A much quicker downshift results but
it takes much more experience (or luck). I learned race car driving with Skip Barber which
teaches you the first method. I was able to pick up the second method after a day of
driving Skip's Formula Ford cars...I don't know if they are easier to match revs with or
not, but it just came naturally (because it was easier and I am naturally lazy....).
Tom.
------------------------------------------------------------------------
Mayo Clinic | If you don't know where | Voice: (507) 266-4261
200 First Street SW |you're going you'll never| FAX: (507) 284-0796
Mail Stop 751 Siebens | get there. |
Rochester, MN 55905 +------------------------
------------------------------------------------------------------------
One of the tricks to get auto-shifting working for you (as opposed to
working against you), is to CAREFULLY pick your gear ratios. Find the
corners where you would normally shift down (but auto-shift doesn't) and
tweak the gearing for those corners. This way you can force the computer
to shift down for you.
Since I am still learning to drive road courses I need booth hands on the
wheel. After my rookie season is over I'll ask the mechanics to install
a gear shift lever :-)
--
**************************** Michael E. Carver *************************
Upside out, or inside down...False alarm the only game in town.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=<[ /./. [- < ]>=-=-=-=-=-=-=-=-=-=-=-=-=-=
I recently got the Trustmaster T1 driving equipment, with the gearstick.
So now I always do manual gears, and I have to say it really does add a
lot to the game, in fact it's almost like different game.
I love being able to drop it down one gear to charge up the hill at
Laguna Seca, and as a result I peak at 151mph at the top of the hill
before the corkscrew, (previously with autoi gears I was getting 147mph),
and my laptime has gone from 1:09 with auto gearing, to a best lap of
1:05.698.
|>
|> >I've run 1:07.396 at Laguna Seca with auto-shifting. Not having to be
|> >bothered with shifting is worth it for me.
|>
|> 1:06:941 here.
|>
I've gotten down to 1:06:571 at Laguna with auto-shifting. A friend of mine did some
experiments comparing auto-shifting to manual-shifting and he believes that he can get
through the turn at the top of the hill (corkscrew) and the last turn faster with
manual-shifting.
BTW - I am working on a tool to allow superimposing two replay files so that separate laps
can be directly compared. I have a prototype that actually works, and am working on a
version with a user interface that I can stand. I will make it available when it is
finished, probably within the next week or two.
--
Mike Corrigan


































