Hi guys
I just purchased a actlabs' force rs and recived it today.
despite many of your opinon on the pedals they are very sticky and
impossible for me to use them for GPL
Will they losen up? if so how long would it take?
also please post your core.ini setting and gain setting
The Act Labs pedals will losen up. In the mean time, try lubricating the
pedal levers where they rub against the base. Vasoline should work fine.
Slot
>Hi guys
>I just purchased a actlabs' force rs and recived it today.
>despite many of your opinon on the pedals they are very sticky and
>impossible for me to use them for GPL
>Will they losen up? if so how long would it take?
>also please post your core.ini setting and gain setting
Hello,
Yes, the pedals will loosen up. Unfortunately, to 'naturally' do so
took a few weeks on my end. Or the equivalent of 1 lap around the
'ring' for me in GPL <VBG> ;)
You can also try using a very small amount of non-spray lithium grease
if you have access to some.
I don't have access to my core.ini or anything at the moment, but I am
using the setting of 100 for the FF effect and I have my Force RS set
with "40" in the 'spring' setup and the 'always use' box checked.
Just my personal preference.
Good luck.
Scott
PA-Scott
Powersims.com
--
Scott B. Husted
ICQ# 4395450
Hello,
I was going to answer this one, but it looks like the other fellas
have done a good enough job. They should work in tech support here.
:)
My pedals werer fine, but I have heard of people using a bit of white
grease to great success.
Raymond
ACT LABS
On Wed, 22 Dec 1999 22:33:32 -0700, "Song Uk Jang"
>Hi guys
>I just purchased a actlabs' force rs and recived it today.
>despite many of your opinon on the pedals they are very sticky and
>impossible for me to use them for GPL
>Will they losen up? if so how long would it take?
>also please post your core.ini setting and gain setting
Raymond
ACT LABS
Of course a good filing of the slots thremselves will solve it completely ;)
Cheers,
Shumi
http://www.rs2league.com
Quoted text (22 lines)
> Hello, > I was going to answer this one, but it looks like the other fellas > have done a good enough job. They should work in tech support here. > :) > My pedals werer fine, but I have heard of people using a bit of white > grease to great success. > Raymond > ACT LABS > On Wed, 22 Dec 1999 22:33:32 -0700, "Song Uk Jang" > >Hi guys > >I just purchased a actlabs' force rs and recived it today. > >despite many of your opinon on the pedals they are very sticky and > >impossible for me to use them for GPL > >Will they losen up? if so how long would it take? > >also please post your core.ini setting and gain setting > Raymond > ACT LABSI filed the slots down, and they don't rub on the bracket anymore.
However... Act Labs wheel owners should be made VERY aware that to do
this... you will have to remove the *** pads on the bottom of the
controller to access the screws that hold the top in place. When you do
this... you will negate your warrantee on the pedal unit... so before you
run out to the shed like a mad man.... keep the warrantee issue in mind.
Cheers,
Shumi
[link lost in import]
> Of course a good filing of the slots thremselves will solve it completely ;)
