? Current Coppermines work just fine! Remove the stock Fan/Heatsink remove
the Thermal pad and use Thermal compond instead.
Replying to you now on a 550e OC to 733 with no problems at all!
Using the stock Heatsink/Fan and it runs at 36deg Cel.
running 133Mhz bus with PC100 memory. This chip should Overclock to 825
easy!
George Sandman
"Yoshi Minami" <[email hidden]> wrote in message
news:M6qn4.4147$[email hidden]...
> I don't recommend current Coppermine, it's having bugs.
> Intel acknowledges and confirmed to fix it in future (around April). but,
Hi,
I'm currently running a PII 266 Intel with a Micronics LX440 motherboard.
Both of which are about 2 years old, and are due for an upgrade.
I've got 128 megs of SDRAM PC100 (I believe) and would like to move this,
and all of my other components (hard drive, cdrom, soundcard, video, etc)
over to a new system.
Can anyone suggest a top quality motherboard that will support an Intel PIII
processor?
And... If I go Intel PIII, what's the best one for the value/price ?
A 500 mhz? Or ???
Thanks for the help!!!
Jay J
You might be able to put a Celeron 500 or 533 into you motherboard (with an
updated BIOS) using an 370-pin PPGA Socket-370 converter card. See:
http://www.anandtech.com/html/articledisplay.cfm?document=1131&pagenum=9
Brian
"Jay J" <[email hidden]> wrote in message
news:aihn4.4757$[email hidden]...
PIII
Quoted text (10 lines)
> Hi, > > I'm currently running a PII 266 Intel with a Micronics LX440 motherboard. > Both of which are about 2 years old, and are due for an upgrade. > > I've got 128 megs of SDRAM PC100 (I believe) and would like to move this, > and all of my other components (hard drive, cdrom, soundcard, video, etc) > over to a new system. > > Can anyone suggest a top quality motherboard that will support an IntelQuoted text (10 lines)
> processor? > > And... If I go Intel PIII, what's the best one for the value/price ? > > A 500 mhz? Or ??? > > Thanks for the help!!! > Jay J > >(caveat: AMD makes great processors now but I am only familiar with Intel)
As always, YMMV, but I'm very happy with my soyo ba iv+ . I am running a non
coppermine 450 at 600. I've heard that it is very easy to clock a coppermine
550 to 733 (133 bus so make sure your memory can handle it). With the soyo
(and most recent bx boards) you can overclock with a couple painless tweaks
in the bios. I think the 550 can be pretty hard to find. Also make sure you
get a coppermine not a katmai. They are about the same price and the
coppermine is much better. Also make sure you get a 100mhz version not a
133. I think the 133's are marked B and the coppermines are marked E. So a
100mhz coppermine 550 would be marked 550E. Cheers and good luck.
www.pricewatch.com is a good place to look for low prices. www.anandtech.com
is a good site for information. http://www.hardocp.com is a great site if
you like to blow things up :-)
Chris
Jay J wrote in message ...
PIII
Quoted text (10 lines)
>Hi, > >I'm currently running a PII 266 Intel with a Micronics LX440 motherboard. >Both of which are about 2 years old, and are due for an upgrade. > >I've got 128 megs of SDRAM PC100 (I believe) and would like to move this, >and all of my other components (hard drive, cdrom, soundcard, video, etc) >over to a new system. > >Can anyone suggest a top quality motherboard that will support an IntelQuoted text (10 lines)
>processor? > >And... If I go Intel PIII, what's the best one for the value/price ? > >A 500 mhz? Or ??? > >Thanks for the help!!! >Jay J > >I currently run a PIII 500mhz with an ASUS P28-F Motherboard. It
has worked flawlessly.
* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!
I don't recommend current Coppermine, it's having bugs.
Intel acknowledges and confirmed to fix it in future (around April). but ,
currently, they let it go and concentrate mass-producing. They're seem
like having labors getting high frequency chips from old Pentium Pro core.
;^)
Athlon is a good choice. let's see http://www.sysdoc.pair.com/
Y.Minami
Best motherboard EVER for Intel chips is the Abit BE6-II. Allows you
to change the FSB in 1 mhz increments, from 83 all the way to 200 mhz.
Huge range of tweaks, UDMA 66, etc.
Great for O'clocking P3's or Celery's (with an adapter card)
Rafe Mc


































