Re: GPL: Graphic and FF problem

In article <[email hidden]>, tei <[email hidden]> writes:

Quoted text (12 lines)

> I recently installed GPL on my pc,,,, -- > > K6-2 350 MHz, Voodoo3 2000, W98, DX 6.2 > > I also installed the 1.2 patch. > > Problem no 1: > > The graphics are not right. I don't know how to describe it, but it > doesn't look good. Lots of dots on the tires etc. The frame-rate is ok > 36 fps. >

GPL in it's unpatched state did have a problem with Voodoo3 cards (corrupt textures in higher resolutions), the patch should have fixed this so I can only suggest making sure you have the latest Voodoo drivers.

Quoted text (12 lines)

> > Problem no 2: > > The force-feedback is not working. I have the core.ini file with > > allow_force_feedback = 1 ; 0 = No * 1 = Yes > force_feedback_latency = 0.085 ; Default = 0.085 > force_feedback_damping = 40.0 ; Default = 40.0 > max_steering_torque = 225.0 ; Default = 225.0 > > Please help >

Check the properties of your core.ini file. As windows doesn't show filename extensions by default the chances are that its actual file name is core.ini.sample. You may need to rename it. > -- > Tor Eide, DoD#2178 > > Rick. -- -- R K Mather [email hidden]

I recently installed GPL on my pc,,,, -- K6-2 350 MHz, Voodoo3 2000, W98, DX 6.2 I also installed the 1.2 patch. Problem no 1: The graphics are not right. I don't know how to describe it, but it doesn't look good. Lots of dots on the tires etc. The frame-rate is ok 36 fps. Problem no 2: The force-feedback is not working. I have the core.ini file with allow_force_feedback = 1 ; 0 = No * 1 = Yes force_feedback_latency = 0.085 ; Default = 0.085 force_feedback_damping = 40.0 ; Default = 40.0 max_steering_torque = 225.0 ; Default = 225.0 Please help -- Tor Eide, DoD#2178