Re: System won't recognize V2-1000

Thanks for the reply. I checked device manager and the only listings under sound, video, and game controllers are for my sound card, game port, and voice modem. I have installed the drivers that came with the disk using the installation routine on the disk as well as the routine in the "add hardware" section. Dumb question......do I need to delete the 3-D drivers for my basic video card? (Sierra Screamin 3-D Rendition 1000) I wouldn't think so, but who knows? George George Adams "From the rockin' of the cradle to the rollin' of the hearse, the goin' up was worth the comin' down." ___Kris Kristofferson "The Pilgrim/Chapter 33"

I installed a 3Dfx V2-1000 PCI today, and I can't get my (antique) system to recognize it. The computer performs fine with the original card operating via the passthrough, so it would seem that the card, connections, and PCI slot are OK, but the card never shows up in my device manager. It's like its not even there. I installed the drivers supplied with the card. System specs as follows: AMD K-6 200 Win 95 DirectX 7.0A Sierra Screamin' 3D video card ( Rendition 1000) 32 meg ram GMB-P57IPS Motherboard with Intel TX Chipset I only paid $50.00 for the card (new), but I hate to waste the money. Thanks very much in advance for any help. George George Adams "From the rockin' of the cradle to the rollin' of the hearse, the goin' up was worth the comin' down." ___Kris Kristofferson "The Pilgrim/Chapter 33"

On Sun 12 Mar 2000 03:59:37a, George Adams wrote:

Quoted text (13 lines)

>I installed a 3Dfx V2-1000 PCI today, and I can't get my (antique) >system to recognize it. The computer performs fine with the original >card operating via the passthrough, so it would seem that the card, >connections, and PCI slot are OK, but the card never shows up in my >device manager. It's like its not even there. I installed the >drivers supplied with the card. System specs as follows: AMD K-6 200 >Win 95 DirectX 7.0A >Sierra Screamin' 3D video card ( Rendition 1000) >32 meg ram >GMB-P57IPS Motherboard with Intel TX Chipset > >I only paid $50.00 for the card (new), but I hate to waste the >money. Thanks very much in advance for any help.

I had a similar problem when transplanting my Diamond Monster Voodoo1 to the Intel 810-based thing that was recently foisted on me. The card was installed OK, the "Add Hardware Wizard" came up as it should, it rebooted OK - but no entry in Device Manager. What I did was to ditch the generic 3dfx drivers and go back to an old set of Diamond Monster drivers. It now works fine. I can't account for this, but something similar may be worth a try. -- David. "The lawyers are destroying inspiration." (Michael Turner, motorsport artist)

>From: "Joe Marques" >No such card. It's either a V"3" 1000 with 16 MB ram or V2 with 8 or 12 MB It's a V2-1000 with 8 meg. It is definitely an add on card. George George Adams "From the rockin' of the cradle to the rollin' of the hearse, the goin' up was worth the comin' down." ___Kris Kristofferson "The Pilgrim/Chapter 33"

On Sun, 12 Mar 2000 04:11:40 GMT, "Joe Marques" <[email hidden]> wrote: >No such card. It's either a V"3" 1000 with 16 MB ram or V2 with 8 or 12 MB >ram. If it's a V3 then it won't work with your other card, it is not an ADD >ON it's a primary vid card both 2D/3D so ditch the rendition and install the >V3 as primary. If it's an old V2 then I don't know what the problem is, >sorry. There is such a Card. The V2 1000 is a 12 Meg <or 8> Voodoo 2 Reference Board... I wish I knew how to help him,But the card is real ;) -Rook

No such card. It's either a V"3" 1000 with 16 MB ram or V2 with 8 or 12 MB ram. If it's a V3 then it won't work with your other card, it is not an ADD ON it's a primary vid card both 2D/3D so ditch the rendition and install the V3 as primary. If it's an old V2 then I don't know what the problem is, sorry. -- Joe Marques George Adams <[email hidden]> wrote in message news:[email hidden]... > I installed a 3Dfx V2-1000 PCI today, and I can't get my (antique) system to > recognize it. The computer performs fine with the original card operating via > the passthrough, so it would seem that the card, connections, and PCI slot are > OK, but the card never shows up in my device manager. It's like its not even > there. I installed the drivers supplied with the card. System specs as follows: > AMD K-6 200 > Win 95 DirectX 7.0A > Sierra Screamin' 3D video card ( Rendition 1000) > 32 meg ram > GMB-P57IPS Motherboard with Intel TX Chipset > > I only paid $50.00 for the card (new), but I hate to waste the money. > Thanks very much in advance for any help. > > George > George Adams > > "From the rockin' of the cradle to the rollin' of the hearse, the goin' up was > worth the comin' down." > ___Kris Kristofferson "The Pilgrim/Chapter 33"

Sorry George, I didn't know the old V2 was called a 1000. My mistake. -- Joe Marques George Adams <[email hidden]> wrote in message news:[email hidden]... > >From: "Joe Marques" > > >No such card. It's either a V"3" 1000 with 16 MB ram or V2 with 8 or 12 MB > > It's a V2-1000 with 8 meg. It is definitely an add on card. > > George > George Adams > > "From the rockin' of the cradle to the rollin' of the hearse, the goin' up was > worth the comin' down." > ___Kris Kristofferson "The Pilgrim/Chapter 33"

go to system( in control panel), then device manager, then look in sound, video and game controllers folder. There should be a device called unknown multimedia device or something like that. Click your right mouse button on it and select properties. Select drive and choose update driver. Make this point to your CD (you did get a CD didn't you?). That should work. I have the latest drivers for this board (Directx7 non-beta) and I'll email them to you if you need them. Regards, Hal9001 * Sent from RemarQ http://www.remarq.com The Internet's Discussion Network * The fastest and easiest way to search and participate in Usenet - Free!

Just a thought... If you previously had a Voodoo 1 card installed in the system, make sure the drivers for it are compleely removed from the system before installing the V2. George Adams wrote:

Quoted text (20 lines)

> I installed a 3Dfx V2-1000 PCI today, and I can't get my (antique) system to > recognize it. The computer performs fine with the original card operating via > the passthrough, so it would seem that the card, connections, and PCI slot are > OK, but the card never shows up in my device manager. It's like its not even > there. I installed the drivers supplied with the card. System specs as follows: > AMD K-6 200 > Win 95 DirectX 7.0A > Sierra Screamin' 3D video card ( Rendition 1000) > 32 meg ram > GMB-P57IPS Motherboard with Intel TX Chipset > > I only paid $50.00 for the card (new), but I hate to waste the money. > Thanks very much in advance for any help. > > George > George Adams > > "From the rockin' of the cradle to the rollin' of the hearse, the goin' up was > worth the comin' down." > ___Kris Kristofferson "The Pilgrim/Chapter 33"

I don't think you need to delete your old drivers. I have a V2 1000 and an ADI 3D card in the same system and they work happily side by side. I have had problems with a soundcard not being recognised and I swapped the cards in the slots and then things sorted themselves out. You could try that. Do you have any ISA cards in your system? Some machines share an ISA port with a PCI port. So you may need to alter your bios and change ISA slots too. I'm sorry I can't be more helpful. I apologise for the delay in my replay. I live in the UK and so there's probably a time lag problem. Good luck with your system. Hal9001 * Sent from RemarQ http://www.remarq.com The Internet's Discussion Network * The fastest and easiest way to search and participate in Usenet - Free!