Race Sim Central
Rec.Autos.Simulators Archive

GPL, Gameport / USB converter problems

6 posts by 4 people · 07 Dec 2004 17:38 UTC - 07 Dec 2004 22:28 UTC

Uwe Schuerkamp 07 Dec 2004 17:38 UTC#28448
Hi folks, I just installed the Rockfire R-203 gameport to usb converter on my machine. Most sims work reasonably well, but GPL refuses to recognize the joystick axis (I have the rockfire set to 4 axes, 4 buttons). The control panel calibration tool looks ok, but once I click on a control function to assign in GPL's option screen, I don't get the red text indicating to move the axis that the control is going to be assigned to, it just goes sits there and does nothing. Any ideas on this one? All the best & thanks in advance, uwe -- Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/ Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E) GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61
"Uwe Sch�rkamp" <[email hidden]> wrote in message news:[email hidden]...
Quoted text (12 lines)> Hi folks, > > I just installed the Rockfire R-203 gameport to usb converter on my > machine. Most sims work reasonably well, but GPL refuses to recognize > the joystick axis (I have the rockfire set to 4 axes, 4 buttons). > > The control panel calibration tool looks ok, but once I click on a > control function to assign in GPL's option screen, I don't get the red > text indicating to move the axis that the control is going to be > assigned to, it just goes sits there and does nothing. > > Any ideas on this one? All the best & thanks in advance,
Try installing gplshift (not the alshift util). I believe the standard gpl only recognises the first & last controller & may be restricted to 3 axis per controller. The gplshift util /may/ allow you to get around that. Malc.
7471000 07 Dec 2004 19:48 UTC↳ reply to Malc#28450
GPLshift+ v0.592: http://home.tiscali.dk/7471000/ JSJ "Malc" <[email hidden]> skrev i en meddelelse news:41b5fb33$0$29746$[email hidden]...
Quoted text (22 lines)> "Uwe Sch�rkamp" <[email hidden]> wrote in message > news:[email hidden]... > > Hi folks, > > > > I just installed the Rockfire R-203 gameport to usb converter on my > > machine. Most sims work reasonably well, but GPL refuses to recognize > > the joystick axis (I have the rockfire set to 4 axes, 4 buttons). > > > > The control panel calibration tool looks ok, but once I click on a > > control function to assign in GPL's option screen, I don't get the red > > text indicating to move the axis that the control is going to be > > assigned to, it just goes sits there and does nothing. > > > > Any ideas on this one? All the best & thanks in advance, > > Try installing gplshift (not the alshift util). I believe the standard gpl > only recognises the first & last controller & may be restricted to 3 axis > per controller. The gplshift util /may/ allow you to get around that. > > Malc. > >
Ive gotten GPL to work with a rockfire adapter before. Just asking a stupid question: When you calibrate the controller inside of GPL which I assume you also are doing, does it calibrate properly there as well? My GPL calibration screen splits the controller into two different screens. One for one axis, and then you click an arrow in the bottom right corner and it lets you calibrate axis two. Do you see the same thing and does it calibrate correctly there? "Uwe Sch�rkamp" <[email hidden]> wrote in message news:[email hidden]...
Quoted text (21 lines)> Hi folks, > > I just installed the Rockfire R-203 gameport to usb converter on my > machine. Most sims work reasonably well, but GPL refuses to recognize > the joystick axis (I have the rockfire set to 4 axes, 4 buttons). > > The control panel calibration tool looks ok, but once I click on a > control function to assign in GPL's option screen, I don't get the red > text indicating to move the axis that the control is going to be > assigned to, it just goes sits there and does nothing. > > Any ideas on this one? All the best & thanks in advance, > > uwe > > > > -- > Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/ > Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E) > GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61
Hi Malc, thanks for your answer. I tracked down the problem to having to run gem2+ again, somehow it "updated" my ini files so that I could assign controllers again as usual. Somehow, this didn't work when I started gpl via the desktop icon; I had to do it through gem2+. All the best, uwe -- Uwe Schuerkamp //////////////////////////// http://www.schuerkamp.de/ Herford, Germany \\\\\\\\\\\\\\\\\\\\\\\\\\ (52.0N/8.5E) GPG Fingerprint: 2E 13 20 22 9A 3F 63 7F 67 6F E9 B1 A8 36 A4 61
"Uwe Sch�rkamp" <[email hidden]> wrote in message news:[email hidden]... > Hi Malc, > > thanks for your answer. I tracked down the problem to having to run > gem2+ again, somehow it "updated" my ini files so that I could assign > controllers again as usual. Somehow, this didn't work when I started > gpl via the desktop icon; I had to do it through gem2+. Odd, but at least you got it sorted ;-) Malc.

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy