Race Sim Central
Rec.Autos.Simulators Archive

F1 2000: braking is way too sensitive. Am I the only one?

5 posts by 3 people · 26 Mar 2000 - 27 Mar 2000 02:01 UTC

(unknown) 26 Mar 2000#283640
I'm having a very hard time controlling the braking. I barely touch the brake pedal (about 10% pressed), the wheels lock up and I lose control. I get this problem regardless of the speed. Here is my config: * MS FF wheel * All aids off * separate axis for gas / brake * Game controller sensitivity: 64%, speed sensitivity: 64%. Dead zone = 8%. I tried the following but NOTHING fixed the braking: * Combined axis * Brake repartition ([ / ]). Different garage settings. * Recalibrate my wheel (remove it from the game panel, add it back, then power the wheel) * I even tried utilities like DXTweak and CTFJ from www.stickworks.com but the braking still does not feel right at all. * Changed the controller sensitivity up and down (in F12K setup page). Turning was a lot less sharp and the braking was still way off. That's driving me crazy, because I find the handling of the car fantastic (i.e. way better than MGPR2) but the braking spoils everything. Am I the only one to experience this problem or is the braking way overdone in F1 2000? Please advise..Thx! Sent via Deja.com http://www.deja.com/ Before you buy.
Iain Mackenzie 26 Mar 2000 09:29 UTC#283642
See previous post on this. 'Wheels locking too easily' I think. Iain <[email hidden]> wrote in message news:8bkgj5$hqc$[email hidden]...
Quoted text (28 lines)> I'm having a very hard time controlling the braking. I barely touch > the brake pedal (about 10% pressed), the wheels lock up and I lose > control. I get this problem regardless of the speed. > Here is my config: > * MS FF wheel > * All aids off > * separate axis for gas / brake > * Game controller sensitivity: 64%, speed sensitivity: 64%. Dead zone = > 8%. > I tried the following but NOTHING fixed the braking: > * Combined axis > * Brake repartition ([ / ]). Different garage settings. > * Recalibrate my wheel (remove it from the game panel, add it back, > then power the wheel) > * I even tried utilities like DXTweak and CTFJ from www.stickworks.com > but the braking still does not feel right at all. > * Changed the controller sensitivity up and down (in F12K setup page). > Turning was a lot less sharp and the braking was still way off. > That's driving me crazy, because I find the handling of the car > fantastic (i.e. way better than MGPR2) but the braking spoils > everything. > Am I the only one to experience this problem or is the braking way > overdone in F1 2000? > Please advise..Thx! > > > Sent via Deja.com http://www.deja.com/ > Before you buy.
Iain Mackenzie 26 Mar 2000 17:03 UTC#283634
Also, try a suggestion sent to me recently. 'In your F12K directory go to season00\vehicles you will see a file named default.vhs. Open this with any text editor (notepad) and scroll down till you see Controls header then look for Braking_Ratio=(9220.2) or close to this and reduce to 6000 or so then save. go back into game and try it to see if its to your liking. Adjust as nessasary to suit.' Iain James Pickard <[email hidden]> wrote in message news:n6mD4.4311$[email hidden]... > And btw... > > Yes it is sensitive.. the technique is TOTALLY different to GPL > > You have to hit the brakes as hard as you can at high speed, then slowback
Quoted text (50 lines)> off the pedal as your speed slows down. > > This is due tothe downforce. At high speed is is litterally impossible to > lock the wheel because of the amount of grip being generated by the wings. > As your speed slows, you have less grip there fore you need to use less > brakes. > > you will actually lock the brakes less if you brake harder at the start of > your deceleration... > > try it > > > James Pickard > > > > > James Pickard <[email hidden]> wrote in message > news:sTlD4.4302$[email hidden]... > > Set it to the following > > > > Contoller: 50% > > > > Speed : 10% > > > > Deadzone - 0% > > > > > > Brake bias - 46:54 > > > > > > > > Shoud fix it > > > > > > James > > > > > > > > <[email hidden]> wrote in message > news:8bkgj5$hqc$[email hidden]... > > > I'm having a very hard time controlling the braking. I barely touch > > > the brake pedal (about 10% pressed), the wheels lock up and I lose > > > control. I get this problem regardless of the speed. > > > Here is my config: > > > * MS FF wheel > > > * All aids off > > > * separate axis for gas / brake > > > * Game controller sensitivity: 64%, speed sensitivity: 64%. Dead zone
=
Quoted text (24 lines)> > > 8%. > > > I tried the following but NOTHING fixed the braking: > > > * Combined axis > > > * Brake repartition ([ / ]). Different garage settings. > > > * Recalibrate my wheel (remove it from the game panel, add it back, > > > then power the wheel) > > > * I even tried utilities like DXTweak and CTFJ from www.stickworks.com > > > but the braking still does not feel right at all. > > > * Changed the controller sensitivity up and down (in F12K setup page). > > > Turning was a lot less sharp and the braking was still way off. > > > That's driving me crazy, because I find the handling of the car > > > fantastic (i.e. way better than MGPR2) but the braking spoils > > > everything. > > > Am I the only one to experience this problem or is the braking way > > > overdone in F1 2000? > > > Please advise..Thx! > > > > > > > > > Sent via Deja.com http://www.deja.com/ > > > Before you buy. > > > > > >
James Pickard 27 Mar 2000 01:45 UTC#283656
Set it to the following Contoller: 50% Speed : 10% Deadzone - 0% Brake bias - 46:54 Shoud fix it James <[email hidden]> wrote in message news:8bkgj5$hqc$[email hidden]...
Quoted text (28 lines)> I'm having a very hard time controlling the braking. I barely touch > the brake pedal (about 10% pressed), the wheels lock up and I lose > control. I get this problem regardless of the speed. > Here is my config: > * MS FF wheel > * All aids off > * separate axis for gas / brake > * Game controller sensitivity: 64%, speed sensitivity: 64%. Dead zone = > 8%. > I tried the following but NOTHING fixed the braking: > * Combined axis > * Brake repartition ([ / ]). Different garage settings. > * Recalibrate my wheel (remove it from the game panel, add it back, > then power the wheel) > * I even tried utilities like DXTweak and CTFJ from www.stickworks.com > but the braking still does not feel right at all. > * Changed the controller sensitivity up and down (in F12K setup page). > Turning was a lot less sharp and the braking was still way off. > That's driving me crazy, because I find the handling of the car > fantastic (i.e. way better than MGPR2) but the braking spoils > everything. > Am I the only one to experience this problem or is the braking way > overdone in F1 2000? > Please advise..Thx! > > > Sent via Deja.com http://www.deja.com/ > Before you buy.
James Pickard 27 Mar 2000 02:01 UTC#283660
And btw... Yes it is sensitive.. the technique is TOTALLY different to GPL You have to hit the brakes as hard as you can at high speed, then slow back off the pedal as your speed slows down. This is due tothe downforce. At high speed is is litterally impossible to lock the wheel because of the amount of grip being generated by the wings. As your speed slows, you have less grip there fore you need to use less brakes. you will actually lock the brakes less if you brake harder at the start of your deceleration... try it James Pickard James Pickard <[email hidden]> wrote in message news:sTlD4.4302$[email hidden]...
Quoted text (21 lines)> Set it to the following > > Contoller: 50% > > Speed : 10% > > Deadzone - 0% > > > Brake bias - 46:54 > > > > Shoud fix it > > > James > > > > <[email hidden]> wrote in message
news:8bkgj5$hqc$[email hidden]...
Quoted text (30 lines)> > I'm having a very hard time controlling the braking. I barely touch > > the brake pedal (about 10% pressed), the wheels lock up and I lose > > control. I get this problem regardless of the speed. > > Here is my config: > > * MS FF wheel > > * All aids off > > * separate axis for gas / brake > > * Game controller sensitivity: 64%, speed sensitivity: 64%. Dead zone = > > 8%. > > I tried the following but NOTHING fixed the braking: > > * Combined axis > > * Brake repartition ([ / ]). Different garage settings. > > * Recalibrate my wheel (remove it from the game panel, add it back, > > then power the wheel) > > * I even tried utilities like DXTweak and CTFJ from www.stickworks.com > > but the braking still does not feel right at all. > > * Changed the controller sensitivity up and down (in F12K setup page). > > Turning was a lot less sharp and the braking was still way off. > > That's driving me crazy, because I find the handling of the car > > fantastic (i.e. way better than MGPR2) but the braking spoils > > everything. > > Am I the only one to experience this problem or is the braking way > > overdone in F1 2000? > > Please advise..Thx! > > > > > > Sent via Deja.com http://www.deja.com/ > > Before you buy. > >

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy