Race Sim Central
Rec.Autos.Simulators Archive

Camber? Toe In?

8 posts by 7 people · 06 Apr 2000 05:31 UTC - 08 Apr 2000 15:04 UTC

Mike 06 Apr 2000 05:31 UTC#280453
Would someone please explain the effects of 'camber' and 'toe in'?
LL 06 Apr 2000 07:27 UTC#280466
Camber means that when you look at your car from behind, or from the front your tires will look like that /---\ Toe-in means that when you look at your car FROM THE TOP it looks like that /---\ --- - Camber means that when you turn the outside wheel will be on the ground with more contact. Toe helps for straight stability and turn in. "Mike" <[email hidden]> a �crit dans le message news: WiVG4.15413$[email hidden]... > Would someone please explain the effects of 'camber' and 'toe in'? > >
Gregor Veble 06 Apr 2000 10:53 UTC#280341
LL wrote:
Quoted text (21 lines)> > Camber means that when you look at your car from behind, or from the front > your tires will look like that /---\ > > Toe-in means that when you look at your car FROM THE TOP it looks like that > /---\ > > --- > > - > > Camber means that when you turn the outside wheel will be on the ground with > more contact. > > Toe helps for straight stability and turn in. > > "Mike" <[email hidden]> a �crit dans le message news: > WiVG4.15413$[email hidden]... > > Would someone please explain the effects of 'camber' and 'toe in'? > > > >
Camber and toe are really the hardest part too set up well. Luckily, my driving is so bad that small deviations in these really do not do anything for my laptimes :) ! Camber as the setup option in GPL is what LL described, namely the angle between the tire plane and the normal to the road when the car is static. The things get more complicated when the car is cornering and the suspension movements and body roll can also contribute to both camber and toe. Unfortunately, GPL, while taking into account these changes, does not visually depict the changes of wheel attitude due to suspension movement thus making seting the camber and toe by watching what the wheels are doing in corners that much harder. One needs to be aware that a (slightly) cambered wheel produces a higher force into the direction into which it is leaning than does a tyre that is perfectly perpendicular to the road. The effect of camber is thus not only to keep the tyre perpendicular when turning, but to keep it leaned into the corner. Running the inner temperatures of the tires a bit higher than the outer ones (you can do this by setting up the camber) will produce best cornering forces. This can be seen on the front tires of modern F1 cars, that have much more degradation on the inner parts of the tires. The rears are set with less camber as this reduces the traction, though. You might object by saying that the inner tire is actually cambered away from the corner thus reducing the overall cornering force. This is true, but as most weight is on the outer tire during cornering, the effect of the inner tire is much less. On tracks that have mostly corners of a single type (ovals, for example), you can set up the wheels to lean in the same direction, though (one with positive and the other with negative camber) for this reason. -Gregor
Jim Allison 07 Apr 2000 22:07 UTC#280097
Gregor Veble <[email hidden]> wrote in message news:[email hidden]...
Quoted text (11 lines)> <snip> > > You might object by saying that the inner tire is actually cambered away > from the corner thus reducing the overall cornering force. This is true, > but as most weight is on the outer tire during cornering, the effect of > the inner tire is much less. On tracks that have mostly corners of a > single type (ovals, for example), you can set up the wheels to lean in > the same direction, though (one with positive and the other with > negative camber) for this reason. > > -Gregor
On the other hand Giovanni Tifosi has an interesting opposing viewpoint at http://website.lineone.net/~richardn/Guru.html#FlatCamber.(an awesome site !!) He implies that we should be using positive cambers (tops of tires farther out than the bottoms) to keep the inside (unladen) tire flat. That is we should be seeing higher outside temps along the straights and even temps on the inside tire in a turn. Giovanni gives a compelling argument for this. I've been using this philosophy for awhile now but I don't know if I'm alone. I find that I can use lower camber settings then I used to. I'd really be interested to here from someone who has tried both. Perhaps it's better for you to stick with what's popular and stay with negative cambers. I may go back for a "visit" myself and see if I notice more grip.
GTX_SlotCar 07 Apr 2000 22:31 UTC#279752
I think cam - ber is what your valves say when you start your car on a winter morning. Toe-in is used for holding the elevator door. Then again, there might be a better answer a few posts back. Slot "Mike" <[email hidden]> wrote in message news:WiVG4.15413$[email hidden]... > Would someone please explain the effects of 'camber' and 'toe in'? > >
Goy Larsen 08 Apr 2000 09:55 UTC#279718
Jim Allison wrote:
Quoted text (18 lines)> > On the other hand Giovanni Tifosi has an interesting opposing viewpoint > at http://website.lineone.net/~richardn/Guru.html#FlatCamber.(an awesome > site !!) He implies that we should be using positive cambers (tops of tires > farther out than the bottoms) to keep the inside (unladen) tire flat. That > is > we should be seeing higher outside temps along the straights and even temps > on the inside tire in a turn. Giovanni gives a compelling argument for this. > > I've been using this philosophy for awhile now but I don't know if I'm > alone. > I find that I can use lower camber settings then I used to. I'd really be > interested > to here from someone who has tried both. Perhaps it's better for you to > stick > with what's popular and stay with negative cambers. I may go back for a > "visit" > myself and see if I notice more grip.
Interesting theory yes, but if it works, then my admiration for the physics engine in GPL that I love so much is gone, this was used in racing cars up to sometime in the 40's or 50's I believe, and was well gone by 67 and the era portrayed in GPL I could go on for ages and write several pages of why this shouldn't work, but I suggest reading a few books on the subject, although, this is how you set up a car for ovals, inner tires positive camber, so it's not wrong per se, it's just that you need to corner both ways :-), and running positive camber on the outside wheel will give you hardly any grip at all because the grip surface of the tire wouldn't be in contact with the road at all, the combination of tire flex and positive camber would have you running on the side walls of the tires, and they're not actually optimized for corner grip :-), and this on the tires that usually provide 80-100% of the cornering grip... I'm not saying this won't work in GPL, but if it does, it's because there's a flaw in the physics model, not because it's a good idea I'm afraid I don't have the time to test this right now, but would be very interested to hear from those of you that will be testing this Beers and cheers (uncle) Goy "Team Mirage" http://www.teammirage.com/ "The Pits" http://www.theuspits.com/ * Spam is for losers who can't get business any other way * "Spamkiller" http://www.spamkiller.com
Goy Larsen 08 Apr 2000 15:04 UTC#279683
Goy Larsen wrote:
Quoted text (20 lines)> > Interesting theory yes, but if it works, then my admiration for the > physics engine in GPL that I love so much is gone, this was used in > racing cars up to sometime in the 40's or 50's I believe, and was well > gone by 67 and the era portrayed in GPL > > I could go on for ages and write several pages of why this shouldn't > work, but I suggest reading a few books on the subject, although, this > is how you set up a car for ovals, inner tires positive camber, so it's > not wrong per se, it's just that you need to corner both ways :-), and > running positive camber on the outside wheel will give you hardly any > grip at all because the grip surface of the tire wouldn't be in contact > with the road at all, the combination of tire flex and positive camber > would have you running on the side walls of the tires, and they're not > actually optimized for corner grip :-), and this on the tires that > usually provide 80-100% of the cornering grip... > > I'm not saying this won't work in GPL, but if it does, it's because > there's a flaw in the physics model, not because it's a good idea I'm > afraid
And of course I totally missed out on the point that this IS for ovals, as part of my punishment I will now install Nascar Revolution and play it for no less than 3 hours tonight..... Beers and cheers (uncle) Goy "Team Mirage" http://www.teammirage.com/ "The Pits" http://www.theuspits.com/ * Spam is for losers who can't get business any other way * "Spamkiller" http://www.spamkiller.com

Sponsors

Affiliate Links

Sim Gaming Expo MOZA Racing Sim-Lab Fanatec TrakRacer Asetek Internet Privacy From NordVPN Dreamhost Capital One Credit Card Application Fanatical CDKeys Amazon Amazon UK Project Motor Racing iRacing Get your racing gloves, boots and more from Demon Tweeks. Enlist at Roberts Space Industries, developers of Star Citizen and Squadron 42


Back from the ashes since July, 2019. First created in 2001 with the merger of Legends Central (founded 1999) and simracing.dk.

A site by a sort of sim racer, for sim racers, about racing sims. News and information on both modern and historic sim racing software titles.

All products and licenses property of their respective owners.


Facebook Threads Bluesky Twitter Mastodon Instagram YouTube Tiktok Twitch Reddit Google News Apple News Subscribe via WordPress Flipboard eBay

Race Sim Central © 1999-2026 | Some links pay RSC a commission. Advertising does not equal endorsement.Cookie Policy