In article <XvWG4.1588$[email hidden]>,
"Iain Mackenzie" <[email hidden]> wrote:
> I've just noticed a reference to EAX in that file. does EAX getswitched on
> if set to 1? Why is it not an option in the menus?
> Iain
> Ian Wright <[email hidden]> wrote in message
> news:38ebeb71$[email hidden]...
I seem to remember having the EAX option selection show up during
installation.
Doug Gordon
Sent via Deja.com http://www.deja.com/
Before you buy.
This sounds cool. Does anyone know what the numbers actually
mean?
--
Header address intentionally scrambled to ward off the spamming hordes.
cisko [AT] ix [DOT] netcom [DOT] com
PHendrix27 <[email hidden]> wrote in message
news:[email hidden]...
> Yeah, mine has shown an improvement too. The installed rating for mine
was 3,
> changed it to 5 and got an improvement in FPS as well.
> PIII 500
> 256megs ram
> ATI Rage Fury Maxx 64 megs
there are some reports of ppl getting a good fps increase by going into the
config.ini and changing SystemRating to 4 or 5... see if it helps, might
need a reboot.
found by Eddy109
Ian
Yeah, mine has shown an improvement too. The installed rating for mine was 3,
changed it to 5 and got an improvement in FPS as well.
PIII 500
256megs ram
ATI Rage Fury Maxx 64 megs
"Ian Wright" <[email hidden]> wrote in message
news:38ebeb71$[email hidden]...
> there are some reports of ppl getting a good fps increase by going intothe
> config.ini and changing SystemRating to 4 or 5... see if it helps, might
> need a reboot.
> found by Eddy109
>
> Ian
Certainly helped the fps here, my system rating installed at 2 and after
reading the post in one of the F12k forums i gave it a shot and increased it
to 5 and while i haven't checked it with Fraps yet it's noticeably better
with my system.
Pll 350
128 ram
12MB V2
SB live
DN
I've just noticed a reference to EAX in that file. does EAX get switched on
if set to 1? Why is it not an option in the menus?
Iain
Ian Wright <[email hidden]> wrote in message
news:38ebeb71$[email hidden]...
> there are some reports of ppl getting a good fps increase by going intothe
Quoted text (7 lines)
> config.ini and changing SystemRating to 4 or 5... see if it helps, might > need a reboot. > found by Eddy109 > > Ian > >There's a menu option called "F1 2000 3d setup".
This one is also started during install.
You can check the eax box there.
Arthur.
Doug Gordon <[email hidden]> wrote in message
news:8ci8nn$t87$[email hidden]...
Quoted text (17 lines)
> In article <XvWG4.1588$[email hidden]>, > "Iain Mackenzie" <[email hidden]> wrote: > > I've just noticed a reference to EAX in that file. does EAX get > switched on > > if set to 1? Why is it not an option in the menus? > > Iain > > Ian Wright <[email hidden]> wrote in message > > news:38ebeb71$[email hidden]... > > I seem to remember having the EAX option selection show up during > installation. > > Doug Gordon > > > Sent via Deja.com http://www.deja.com/ > Before you buy.Must not work for everybody... Mine was at a 3 and I tried a 5... Same
framerate as shown with fraps. P2 400, 128meg, Voodoo3 3000, SBlive value
Ian Wright wrote:
> there are some reports of ppl getting a good fps increase by going into the
> config.ini and changing SystemRating to 4 or 5... see if it helps, might
> need a reboot.
> found by Eddy109
>
> Ian
