Have new Momo Force. Need settings info...

Just picked up a Momo Force. Finally, Pedals from Logitech I can live with :) This thing does force good posture, doesn't it :) Anyway, I know wheel setups in games are a lot different than the MSFFW, so I need some info to get me started. I need basic help with the following: Nascar Racing 2003 EA-NSR Demo GTP rFactor Thanks :) -Larry

"Larry" <[email hidden]> wrote in news:JpgPd.58016$jn.9501@lakeread06:

Quoted text (8 lines)

> EA-NSR Demo > GTP > rFactor > > Thanks :) > > -Larry >

Keep in mind that for the ISI products, you need to set the in-game FF slider to negative values. dh

Larry wrote:

Quoted text (21 lines)

> Just picked up a Momo Force. > > Finally, Pedals from Logitech I can live with :) > > This thing does force good posture, doesn't it :) > > Anyway, I know wheel setups in games are a lot different than the MSFFW, so > I need some info to get me started. > > I need basic help with the following: > > Nascar Racing 2003 > EA-NSR Demo > GTP > rFactor > > Thanks :) > > -Larry > >

NR2003 is the only sim that I have where I run the MOMO Force WITHOUT the Logi Profiler. In other words, right out of the box. In-Game settings are Strength=99; Damping=10; Latency=0. Under Advanced settings, I have Steeering Assist=10; Linearity=80; Everything else is 0. Those are my settings. They may or may not work for you. Can't help with the others that you mentioned.

Good tip. Thanks! -Larry "Dave Henrie" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (15 lines)

> "Larry" <[email hidden]> wrote in news:JpgPd.58016$jn.9501@lakeread06: > >> EA-NSR Demo >> GTP >> rFactor >> >> Thanks :) >> >> -Larry >> > > Keep in mind that for the ISI products, you need to set the in-game FF > slider to negative values. > > dh

What exactly does the Damping slider do in the Logitech Profiler? Also, I am unable to find an overall Sensitivity slider in the Logi Profiler. Am I missing something? -larry "Dave Henrie" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (15 lines)

> "Larry" <[email hidden]> wrote in news:JpgPd.58016$jn.9501@lakeread06: > >> EA-NSR Demo >> GTP >> rFactor >> >> Thanks :) >> >> -Larry >> > > Keep in mind that for the ISI products, you need to set the in-game FF > slider to negative values. > > dh

Folks, I have another problem.... I can't get TeamSpeak to work with the wheel button. I normally use the lower right (button 8) button to trigger teamspeak. Since TeamSpeak doesn't acknowledge wheel buttons, I have it set to trigger using the right control key. Then, in the profiler, I assign button 8 to the right control key. This worked perfectly with my MSFFW, but I cannot get it to trigger with the Logitech. Also, I need this button to work like this in ANY game since I use it consistently for this. Any way to set this in a global manner? -Larry "Larry" <[email hidden]> wrote in message news:JHqPd.58033$jn.16324@lakeread06...

Quoted text (22 lines)

> Good tip. Thanks! > > -Larry > "Dave Henrie" <[email hidden]> wrote in message > news:[email hidden]... >> "Larry" <[email hidden]> wrote in news:JpgPd.58016$jn.9501@lakeread06: >> >>> EA-NSR Demo >>> GTP >>> rFactor >>> >>> Thanks :) >>> >>> -Larry >>> >> >> Keep in mind that for the ISI products, you need to set the in-game FF >> slider to negative values. >> >> dh > >

Larry wrote:

Quoted text (34 lines)

> Folks, I have another problem.... > > I can't get TeamSpeak to work with the wheel button. > > I normally use the lower right (button 8) button to trigger teamspeak. > Since TeamSpeak doesn't acknowledge wheel buttons, I have it set to > trigger using the right control key. > > Then, in the profiler, I assign button 8 to the right control key. > > This worked perfectly with my MSFFW, but I cannot get it to trigger with > the Logitech. > > Also, I need this button to work like this in ANY game since I use it > consistently for this. Any way to set this in a global manner? > > -Larry > > "Larry" <[email hidden]> wrote in message > news:JHqPd.58033$jn.16324@lakeread06... >> Good tip. Thanks! >> >> -Larry >> "Dave Henrie" <[email hidden]> wrote in message >> news:[email hidden]... >>> "Larry" <[email hidden]> wrote in news:JpgPd.58016$jn.9501@lakeread06: >>> >>>> EA-NSR Demo >>>> GTP >>>> rFactor >>>> >>>> Thanks :) >>>> >>>> -Larry

You need a little utility and for the life of me I cant remember the name of it or find it on my network. Joyswitch or something like that. I got tired of having to mess with it so I just mapped a kb button then moved my KB closer for easy reach. Mitch -- Remove "nospam." to reply. SuSE 9.2 Pro KDE 3.3.2a

Larry wrote:

Quoted text (29 lines)

> What exactly does the Damping slider do in the Logitech Profiler? > > Also, I am unable to find an overall Sensitivity slider in the Logi > Profiler. Am I missing something? > > -larry > > "Dave Henrie" <[email hidden]> wrote in message > news:[email hidden]... > >>"Larry" <[email hidden]> wrote in news:JpgPd.58016$jn.9501@lakeread06: >> >> >>>EA-NSR Demo >>>GTP >>>rFactor >>> >>>Thanks :) >>> >>>-Larry >>> >> >> Keep in mind that for the ISI products, you need to set the in-game FF >>slider to negative values. >> >>dh > > >

If, by sensitivity, you mean linearity ---- that's usually set within the sim that you're using at the time.

Larry wrote:

Quoted text (47 lines)

> Folks, I have another problem.... > > I can't get TeamSpeak to work with the wheel button. > > I normally use the lower right (button 8) button to trigger teamspeak. > Since TeamSpeak doesn't acknowledge wheel buttons, I have it set to trigger > using the right control key. > > Then, in the profiler, I assign button 8 to the right control key. > > This worked perfectly with my MSFFW, but I cannot get it to trigger with the > Logitech. > > Also, I need this button to work like this in ANY game since I use it > consistently for this. Any way to set this in a global manner? > > -Larry > > "Larry" <[email hidden]> wrote in message > news:JHqPd.58033$jn.16324@lakeread06... > >>Good tip. Thanks! >> >>-Larry >>"Dave Henrie" <[email hidden]> wrote in message >>news:[email hidden]... >> >>>"Larry" <[email hidden]> wrote in news:JpgPd.58016$jn.9501@lakeread06: >>> >>> >>>>EA-NSR Demo >>>>GTP >>>>rFactor >>>> >>>>Thanks :) >>>> >>>>-Larry >>>> >>> >>> Keep in mind that for the ISI products, you need to set the in-game FF >>>slider to negative values. >>> >>>dh >> >> > >

Larry, Try another button. The #8 button on my MOMO Force is kind of flaky too -- don't know why. I can map things to the other buttons -- just not to #8. Or, Google for a utility called JoytoKey. That's the file that Mitch is referring to in his post. Bert

That's what I had to do yesterday. It cost me two wall hits :( -Larry "Mitch_A" <[email hidden]> wrote in message news:uRsPd.3456$[email hidden]...

Quoted text (47 lines)

> Larry wrote: > >> Folks, I have another problem.... >> >> I can't get TeamSpeak to work with the wheel button. >> >> I normally use the lower right (button 8) button to trigger teamspeak. >> Since TeamSpeak doesn't acknowledge wheel buttons, I have it set to >> trigger using the right control key. >> >> Then, in the profiler, I assign button 8 to the right control key. >> >> This worked perfectly with my MSFFW, but I cannot get it to trigger with >> the Logitech. >> >> Also, I need this button to work like this in ANY game since I use it >> consistently for this. Any way to set this in a global manner? >> >> -Larry >> >> "Larry" <[email hidden]> wrote in message >> news:JHqPd.58033$jn.16324@lakeread06... >>> Good tip. Thanks! >>> >>> -Larry >>> "Dave Henrie" <[email hidden]> wrote in message >>> news:[email hidden]... >>>> "Larry" <[email hidden]> wrote in news:JpgPd.58016$jn.9501@lakeread06: >>>> >>>>> EA-NSR Demo >>>>> GTP >>>>> rFactor >>>>> >>>>> Thanks :) >>>>> >>>>> -Larry > > You need a little utility and for the life of me I cant remember the name > of > it or find it on my network. Joyswitch or something like that. I got > tired of having to mess with it so I just mapped a kb button then moved my > KB closer for easy reach. > > Mitch > -- > Remove "nospam." to reply. > SuSE 9.2 Pro KDE 3.3.2a

No, I do not mean linearity. I mean overall sensitivity. The MSFFW has this setting in it's profiler and I miss it. -Larry <BRH> wrote in message news:[email hidden]...

Quoted text (32 lines)

> Larry wrote: >> What exactly does the Damping slider do in the Logitech Profiler? >> >> Also, I am unable to find an overall Sensitivity slider in the Logi >> Profiler. Am I missing something? >> >> -larry >> >> "Dave Henrie" <[email hidden]> wrote in message >> news:[email hidden]... >> >>>"Larry" <[email hidden]> wrote in news:JpgPd.58016$jn.9501@lakeread06: >>> >>> >>>>EA-NSR Demo >>>>GTP >>>>rFactor >>>> >>>>Thanks :) >>>> >>>>-Larry >>>> >>> >>> Keep in mind that for the ISI products, you need to set the in-game FF >>>slider to negative values. >>> >>>dh >> >> >> > If, by sensitivity, you mean linearity ---- that's usually set within > the sim that you're using at the time.

I tried a few buttons. No joy. I'll go look for Joy2Key now. Thanks! BTW... Isn't it kinda dumb that the profile software can't do this? What's the use of the mapping function if it can't map a button to a keyboard key? -Larry <BRH> wrote in message news:[email hidden]...

Quoted text (61 lines)

> Larry wrote: > >> Folks, I have another problem.... >> >> I can't get TeamSpeak to work with the wheel button. >> >> I normally use the lower right (button 8) button to trigger teamspeak. >> Since TeamSpeak doesn't acknowledge wheel buttons, I have it set to >> trigger using the right control key. >> >> Then, in the profiler, I assign button 8 to the right control key. >> >> This worked perfectly with my MSFFW, but I cannot get it to trigger with >> the Logitech. >> >> Also, I need this button to work like this in ANY game since I use it >> consistently for this. Any way to set this in a global manner? >> >> -Larry >> >> "Larry" <[email hidden]> wrote in message >> news:JHqPd.58033$jn.16324@lakeread06... >> >>>Good tip. Thanks! >>> >>>-Larry >>>"Dave Henrie" <[email hidden]> wrote in message >>>news:[email hidden]... >>> >>>>"Larry" <[email hidden]> wrote in news:JpgPd.58016$jn.9501@lakeread06: >>>> >>>> >>>>>EA-NSR Demo >>>>>GTP >>>>>rFactor >>>>> >>>>>Thanks :) >>>>> >>>>>-Larry >>>>> >>>> >>>> Keep in mind that for the ISI products, you need to set the in-game >>>> FF >>>>slider to negative values. >>>> >>>>dh >>> >>> >> >> > Larry, > > Try another button. The #8 button on my MOMO Force is kind of flaky > too -- don't know why. I can map things to the other buttons -- just not > to #8. > > Or, Google for a utility called JoytoKey. That's the file that Mitch is > referring to in his post. > > Bert >

Larry wrote:

Quoted text (53 lines)

> That's what I had to do yesterday. It cost me two wall hits :( > > -Larry > > "Mitch_A" <[email hidden]> wrote in message > news:uRsPd.3456$[email hidden]... >> Larry wrote: >> >>> Folks, I have another problem.... >>> >>> I can't get TeamSpeak to work with the wheel button. >>> >>> I normally use the lower right (button 8) button to trigger teamspeak. >>> Since TeamSpeak doesn't acknowledge wheel buttons, I have it set to >>> trigger using the right control key. >>> >>> Then, in the profiler, I assign button 8 to the right control key. >>> >>> This worked perfectly with my MSFFW, but I cannot get it to trigger with >>> the Logitech. >>> >>> Also, I need this button to work like this in ANY game since I use it >>> consistently for this. Any way to set this in a global manner? >>> >>> -Larry >>> >>> "Larry" <[email hidden]> wrote in message >>> news:JHqPd.58033$jn.16324@lakeread06... >>>> Good tip. Thanks! >>>> >>>> -Larry >>>> "Dave Henrie" <[email hidden]> wrote in message >>>> news:[email hidden]... >>>>> "Larry" <[email hidden]> wrote in news:JpgPd.58016$jn.9501@lakeread06: >>>>> >>>>>> EA-NSR Demo >>>>>> GTP >>>>>> rFactor >>>>>> >>>>>> Thanks :) >>>>>> >>>>>> -Larry >> >> You need a little utility and for the life of me I cant remember the name >> of >> it or find it on my network. Joyswitch or something like that. I got >> tired of having to mess with it so I just mapped a kb button then moved >> my KB closer for easy reach. >> >> Mitch >> -- >> Remove "nospam." to reply. >> SuSE 9.2 Pro KDE 3.3.2a

LOL, yea I been there :) Distractions are my worst enemy. Half the time Im on the phone or Bonnie is yappin at me about something or Im glancing at the Busch race on TV (yes my TV in directly in my feild of vision so I dont turn my head) always something :) Mitch -- Remove "nospam." to reply. SuSE 9.2 Pro KDE 3.3.2a

"Larry" <[email hidden]> wrote: > >No, I do not mean linearity. > >I mean overall sensitivity. > >The MSFFW has this setting in it's profiler and I miss it. But it's there. :-) When you open the Logitech Profiler, it shows you each and every axis and button the wheel/gamepad/joystick has, right? Now simply click on one of the axes, select "Axis properties" and you can adjust sensitiviy, deadzone and axis range.

Matthias Puch <[email hidden]> wrote in news:[email hidden]:

Quoted text (14 lines)

> "Larry" <[email hidden]> wrote: > >> >>No, I do not mean linearity. >> >>I mean overall sensitivity. >> >>The MSFFW has this setting in it's profiler and I miss it. > > But it's there. :-) > When you open the Logitech Profiler, it shows you each and every axis > and button the wheel/gamepad/joystick has, right? Now simply click on > one of the axes, select "Axis properties" and you can adjust > sensitiviy, deadzone and axis range.

Remember, 50% is full linear in the Logi profiler, just like the ISI in- game sliders. dh

Jeez. Let's not hide it from the user now LOL! Thanks :) -Larry "Matthias Puch" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (14 lines)

> "Larry" <[email hidden]> wrote: > >> >>No, I do not mean linearity. >> >>I mean overall sensitivity. >> >>The MSFFW has this setting in it's profiler and I miss it. > > But it's there. :-) > When you open the Logitech Profiler, it shows you each and every axis > and button the wheel/gamepad/joystick has, right? Now simply click on > one of the axes, select "Axis properties" and you can adjust > sensitiviy, deadzone and axis range.

I'm glad you told me that :) -Larry "Dave Henrie" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (21 lines)

> Matthias Puch <[email hidden]> wrote in > news:[email hidden]: > >> "Larry" <[email hidden]> wrote: >> >>> >>>No, I do not mean linearity. >>> >>>I mean overall sensitivity. >>> >>>The MSFFW has this setting in it's profiler and I miss it. >> >> But it's there. :-) >> When you open the Logitech Profiler, it shows you each and every axis >> and button the wheel/gamepad/joystick has, right? Now simply click on >> one of the axes, select "Axis properties" and you can adjust >> sensitiviy, deadzone and axis range. > > Remember, 50% is full linear in the Logi profiler, just like the ISI in- > game sliders. > dh