F1 2K TSW problems

Ok, I give up. I couldn't find a decent answer in the 100's of messages on deja... I have a TSW2mod w/ split-axis setting. I finally got F12K from Ebay. I've installed the program, and it doesn't seem to see my wheel and pedals. I can use the default config if I set the pedals back to single axis, but if I change anything, it will never see it. I've already had to delete my player twice. :( I found the 'unsupported options' screen, and changed the setting to split-axis. No good. I even tried holding the pedals down while starting the game. I couldn't find ANY calibration screen, and I haven't been able to get this program to work satisfactorily. All of my other games work great...and the wheel/pedals calibrate just FINE in the control panel I'm going to assume that I just have some settings incorrect before I call it a piece of crap... It reminds me a lot of the F1 game by Psygnosis - both look and feel. I also need suggestions on display options. I'm running a K63/400 with 128K ram and a V3 3000. The standard graphics settings cause frame hits with a full field. What have people had success changing options to with this type of system? Can anyone help me out? Thanks. Eldred p.s. yes, I *do* have the 1.09 patch. I was hoping that would solve my problems...<sigh> -- Tiger Stadium R.I.P. 1912-1999 Homepage - http://www.umich.edu/~epickett GPL hcp. +70.45 Never argue with an idiot. He brings you down to his level, then beats you with experience... Remove SPAM-OFF to reply.

eldredp wrote; >I've installed the program, and it doesn't seem to see my wheel and pedals. >I >can use the default config if I set the pedals back to single axis, but if I >change anything, it will never see it. This from the f1_2000_faq.txt at bhmotorsports.com: I cannot configure my steering wheel, joystick or gamepad to go left or right in the Controls Menu. What can I do? Start the game and choose either Test Day, Quick Race, Grand Prix or Championship mode from the F1 2000 Main Menu. Once a team, driver and track have been selected enter the game by clicking on the drive icon in the Session Status Display. Once the car is on track press Escape and then Return on the keyboard to go back into the Session Status Display. From here click back on the icon for Main Menu and then click the Controls icon to access the Controls Menu. You will now be able to configure the left and right axis on your steering wheel, joystick, gamepad successfully. >I also need suggestions on display options There is a lot of talk about this in r.a.c. Some of the biggies: Turn off mirrors. Fewer AI opponents. Reduce texture quality. Tom

In article <VVWd5.36107$[email hidden]>, "Greg Cisko" <[email hidden]> writes: >What joystick ID# is your TWS on in the control panel joystick >applet? It's set for ID#1. I discovered that not only did I have to go 'to the track' (as Tom suggested) before I could configure the pedals, I also had to hold down the brake pedal. In other words, press the pedal, hold it down, select Test Day, click to go to the track. Once the car was actually on the track, I could release the pedal. Even after doing the config, I have to follow that procedure every time I do a session. Once I'm there, it works for the rest of that session. If I exit to change tracks, or do a Gran Prix, or different race, etc - I have to hold down the pedal until I get to the track the first time... If I jump into a race, and forget to do it, I'm screwed. Unbelievable...poor programming... Eldred -- Tiger Stadium R.I.P. 1912-1999 Homepage - http://www.umich.edu/~epickett GPL hcp. +70.45 Never argue with an idiot. He brings you down to his level, then beats you with experience... Remove SPAM-OFF to reply.

In article <[email hidden]>, [email hidden] (TToommLL) writes:

Quoted text (22 lines)

>eldredp wrote; >>I've installed the program, and it doesn't seem to see my wheel and pedals. >>I >>can use the default config if I set the pedals back to single axis, but if I >>change anything, it will never see it. > >This from the f1_2000_faq.txt at bhmotorsports.com: >I cannot configure my steering wheel, joystick or gamepad to go left or right >in >the Controls Menu. What can I do? > >Start the game and choose either Test Day, Quick Race, Grand Prix or >Championship mode from the F1 2000 Main Menu. Once a team, driver and track >have been selected enter the game by clicking on the drive icon in the >Session >Status Display. Once the car is on track press Escape and then Return on the >keyboard to go back into the Session Status Display. From here click back on >the icon for Main Menu and then click the >Controls icon to access the Controls Menu. You will now be able to configure >the left >and right axis on your steering wheel, joystick, gamepad successfully. >

Geez, so many hoops to jump through with *production*(not Beta) software??? Now I see why so many people were pissed off... Although, I think I did that the first time accidentally. I went to the track(not even THINKING about calibrating), and none of the controls worked, so I had to backtrack...

Quoted text (9 lines)

>>I also need suggestions on display options > >There is a lot of talk about this in r.a.c. Some of the biggies: >Turn off mirrors. >Fewer AI opponents. >Reduce texture quality. > >Tom >

Thanks, Tom. I'll try your suggestions when I get home. Eldred -- Tiger Stadium R.I.P. 1912-1999 Homepage - http://www.umich.edu/~epickett GPL hcp. +70.45 Never argue with an idiot. He brings you down to his level, then beats you with experience... Remove SPAM-OFF to reply.

What joystick ID# is your TWS on in the control panel joystick applet? -- [email hidden] "EldredP" <[email hidden]> wrote in message news:[email hidden]... > Ok, I give up. I couldn't find a decent answer in the 100's of messages on > deja... I have a TSW2mod w/ split-axis setting. I finally got F12K from Ebay. > I've installed the program, and it doesn't seem to see my wheel and pedals. I > can use the default config if I set the pedals back to single axis, but if I > change anything, it will never see it. I've already had to delete my player > twice. :( I found the 'unsupported options' screen, and changed the setting > to split-axis. No good. I even tried holding the pedals down while starting > the game. I couldn't find ANY calibration screen, and I haven't been able to > get this program to work satisfactorily. All of my other games work > great...and the wheel/pedals calibrate just FINE in the control panel I'm > going to assume that I just have some settings incorrect before I call it a > piece of crap... It reminds me a lot of the F1 game by Psygnosis - both look > and feel. > > I also need suggestions on display options. I'm running a K63/400 with 128K > ram and a V3 3000. The standard graphics settings cause frame hits with a full > field. What have people had success changing options to with this type of > system? > Can anyone help me out? Thanks. > > Eldred > p.s. yes, I *do* have the 1.09 patch. I was hoping that would solve my > problems...<sigh> > -- > Tiger Stadium R.I.P. 1912-1999 > Homepage - http://www.umich.edu/~epickett > GPL hcp. +70.45 > > Never argue with an idiot. He brings you down to his level, then beats you > with experience... > Remove SPAM-OFF to reply.