My black MOMO accelerator pedal pot is getting a bit jumpy, so I thought
I'll give it a cleaning to see if that fixes it. Took out the 8 screws from
the underside of the pedals and ... ????? How do you get into these things?
Marc
--
****************************************************************************
Marc Collins
[email hidden]
Your mouse has moved. Windows must be restarted for the change
to take effect. Reboot now?
****************************************************************************
Replace the pedals with these http://ecci6000.com/6000_momo_01.htm
Or take out the screws under the rubber feet!
--
Andi.
Remove only one zero to reply
"Marc Collins" <[email hidden]> wrote in message
news:NwIRd.34641$[email hidden]...
> My black MOMO accelerator pedal pot is getting a bit jumpy, so I thought
> I'll give it a cleaning to see if that fixes it. Took out the 8 screws
from
> the underside of the pedals and ... ????? How do you get into these
things?
>
> Marc
>
> --
>
****************************************************************************
> Marc Collins
> [email hidden]
>
> Your mouse has moved. Windows must be restarted for the change
> to take effect. Reboot now?
>
****************************************************************************
>
>
Replace the pedals with these http://ecci6000.com/6000_momo_01.htm
Or take out the screws under the *** feet!
--
Andi.
Remove only one zero to reply
****************************************************************************
> Marc Collins
> Your mouse has moved. Windows must be restarted for the change
> to take effect. Reboot now?
****************************************************************************
I wondered if there were screws under there but didn't want to ruin the
rubber--it wasn't peeling off when I tried to pry it with my screwdriver.
Thanks for the insight, though!
Marc
"Andi Cole" <[email hidden]> wrote in message
news:42177321$0$68461$[email hidden]...
Quoted text (34 lines)
> Replace the pedals with these http://ecci6000.com/6000_momo_01.htm > > Or take out the screws under the rubber feet! > > -- > Andi. > > Remove only one zero to reply > > > "Marc Collins" <[email hidden]> wrote in message > news:NwIRd.34641$[email hidden]... >> My black MOMO accelerator pedal pot is getting a bit jumpy, so I thought >> I'll give it a cleaning to see if that fixes it. Took out the 8 screws > from >> the underside of the pedals and ... ????? How do you get into these > things? >> >> Marc >> >> -- >> > **************************************************************************** >> Marc Collins >> [email hidden] >> >> Your mouse has moved. Windows must be restarted for the change >> to take effect. Reboot now? >> > **************************************************************************** >> >> > >
"Marc Collins" <[email hidden]> wrote in message
news:SD9Sd.2046$[email hidden]...
When you see how pathetically the pots are seated you'll probably find
that that is the issue rather than a failing pot. You can fit the end of a
cheap pen's plastic ink tube (approx 1/2 inch) over the nipple and slide it
back in thus holding the pot nice and firmly in place. Then you have a
perfect set of peddles 'til the secondary brake spring fails! :)
Quoted text (7 lines)
>I wondered if there were screws under there but didn't want to ruin the >rubber--it wasn't peeling off when I tried to pry it with my screwdriver. > > Thanks for the insight, though! > > Marc >JUst BE CAREFUL and GO SLOW as you take it apart!! I took mine apart
to reseat the pot's and it came apart too easily and I had to refigure
how and where everything went to reassemble it...
