Re: MSS Force Feedback Pulls Left?

Go to the windows MSFF controller menu, and disable the "map y forces to x axis" option. I had the same problem with an ACT Labs Force RS, until I unchecked that box -- Pat Dotson Ian Dickson wrote: > > Anybody else suffer from this? > > The right hand turns are OK > > But if I turn left it pulls me left!! > > TIA for any suggestions > > Ian

Yep, I have the same problem. "Ian Dickson" <[email hidden]> wrote:

Quoted text (11 lines)

>Anybody else suffer from this? > >The right hand turns are OK > >But if I turn left it pulls me left!! > >TIA for any suggestions > >Ian > >

*************************************************************************************** * Time is an illusion, lunchtime doubly so... * Glenn Davies * * Drink up, the world's about to end ! * [email hidden] * ***************************************************************************************

Anybody else suffer from this? The right hand turns are OK But if I turn left it pulls me left!! TIA for any suggestions Ian

The motors actually yank the wheel left as I turn left.. It's wierd.. When I turn right I get the correct forces simulating resistance.. Any ideas welcome Great game though.. Weather is spectacular.. adds another dimension to the strategy of Sim racing

Mine doesn't pull left, yet ! Try to calibrate your controller with the "control driven calibration" option checked. "Ian Dickson" <[email hidden]> wrote in message news:8lsi0f$2na$[email hidden]...

Quoted text (12 lines)

> Anybody else suffer from this? > > The right hand turns are OK > > But if I turn left it pulls me left!! > > TIA for any suggestions > > Ian > > >

Ian, Check out this Forum, if you haven't done so already. http://forums.simracingnews.com/cgi-bin/Ultimate.cgi?action=intro&BypassCook ie=true Seems you are not alone.

On my ACT Labs wheel, I have to have the "x to y" box unchecked, and turn the default spring on. I set the default spring to a very low level though. I have an MSFF wheel here. I'll try to get it connected and let you know if it works for me. -- Pat Dotson G Evans wrote: > > >Go to the windows MSFF controller menu, and disable > >the "map y forces to x axis" option. > > All this does, on My MSFF is to turn off ff altogether. > Any other suggestions? > > Gordon.

I've got a Saitek R4 that has the same internals as the MSFF and my settings below those and have no probs. Could be drivers ? Regards Mike On Sat, 29 Jul 2000 14:02:06 +0100, "Douglas Ellison" <[email hidden]> wrote:

Quoted text (34 lines)

>Get the same if I have the Steer Help below about 5%, and Speed Sensetivity >below about 30%. Putting both of those above those values seems to solve the >problem > >Doug >Glenn Davies <[email hidden]> wrote in message >news:[email hidden]... >> Yep, I have the same problem. >> >> "Ian Dickson" <[email hidden]> wrote: >> >> >Anybody else suffer from this? >> > >> >The right hand turns are OK >> > >> >But if I turn left it pulls me left!! >> > >> >TIA for any suggestions >> > >> >Ian >> > >> > >> >> >**************************************************************************** >*********** >> * Time is an illusion, lunchtime doubly so... * Glenn Davies >* >> * Drink up, the world's about to end ! * >[email hidden] * >> >**************************************************************************** >*********** >

Ian P wrote: > > Pat, the MSFF wheel doesn't have any force at all in GP3 without that box > checked. Intersting. Are you sure you have the FF scaling in GP3 set to 100%? Do you have the default centering spring enabled? I think I had to enable it to get effects, but i have it set very low (3%). Try that. I have an MSFF wheel setting here - I'll have to hook it up and see how it compares to the ACT Labs. -- Pat Dotson

>Go to the windows MSFF controller menu, and disable >the "map y forces to x axis" option. All this does, on My MSFF is to turn off ff altogether. Any other suggestions? Gordon.

Get the same if I have the Steer Help below about 5%, and Speed Sensetivity below about 30%. Putting both of those above those values seems to solve the problem Doug Glenn Davies <[email hidden]> wrote in message news:[email hidden]...

Quoted text (17 lines)

> Yep, I have the same problem. > > "Ian Dickson" <[email hidden]> wrote: > > >Anybody else suffer from this? > > > >The right hand turns are OK > > > >But if I turn left it pulls me left!! > > > >TIA for any suggestions > > > >Ian > > > > > >

**************************************************************************** *********** > * Time is an illusion, lunchtime doubly so... * Glenn Davies* > * Drink up, the world's about to end ! *[email hidden] * >**************************************************************************** ***********

Doesn't work. What else can I try??? marc

Quoted text (28 lines)

> Hello, > I've the same problem. someone said I have to use the microsoft game > controller software 3.0 and then it should work. i havent tried it but i > will check that! > marc > > Yep, I have the same problem. > > >Anybody else suffer from this? > > >The right hand turns are OK > > >But if I turn left it pulls me left!! > > >TIA for any suggestions > > >Ian

**************************************************************************** > *********** > > * Time is an illusion, lunchtime doubly so... * Glenn Davies > * > > * Drink up, the world's about to end ! * ****************************************************************************

Pat, the MSFF wheel doesn't have any force at all in GP3 without that box checked. -- Ian Parker "Ambition is a poor excuse for not having sense enough to be lazy." <email invalid due to spam> Pat Dotson <[email hidden]> wrote in message news:[email hidden]... > Go to the windows MSFF controller menu, and disable > the "map y forces to x axis" option. > > I had the same problem with an ACT Labs Force RS, > until I unchecked that box > > -- > Pat Dotson > > > Ian Dickson wrote: > > > > Anybody else suffer from this? > > > > The right hand turns are OK > > > > But if I turn left it pulls me left!! > > > > TIA for any suggestions > > > > Ian

Hello, I've the same problem. someone said I have to use the microsoft game controller software 3.0 and then it should work. i havent tried it but i will check that! marc [email hidden] "Glenn Davies" <[email hidden]> schrieb im Newsbeitrag news:[email hidden]...

Quoted text (17 lines)

> Yep, I have the same problem. > > "Ian Dickson" <[email hidden]> wrote: > > >Anybody else suffer from this? > > > >The right hand turns are OK > > > >But if I turn left it pulls me left!! > > > >TIA for any suggestions > > > >Ian > > > > > >

**************************************************************************** *********** > * Time is an illusion, lunchtime doubly so... * Glenn Davies* > * Drink up, the world's about to end ! *[email hidden] * >**************************************************************************** ***********

Doesn't work. What else can I try??? marc [email hidden] "Marc Hugelshofer" <[email hidden]> schrieb im Newsbeitrag news:8lvbvv$2so$[email hidden]...

Quoted text (34 lines)

> Hello, > > I've the same problem. someone said I have to use the microsoft game > controller software 3.0 and then it should work. i havent tried it but i > will check that! > > marc > > [email hidden] > > > > > > "Glenn Davies" <[email hidden]> schrieb im > Newsbeitrag news:[email hidden]... > > Yep, I have the same problem. > > > > "Ian Dickson" <[email hidden]> wrote: > > > > >Anybody else suffer from this? > > > > > >The right hand turns are OK > > > > > >But if I turn left it pulls me left!! > > > > > >TIA for any suggestions > > > > > >Ian > > > > > > > > > > >

****************************************************************************

Quoted text (7 lines)

> *********** > > * Time is an illusion, lunchtime doubly so... * Glenn Davies > * > > * Drink up, the world's about to end ! * > [email hidden] * > > >

**************************************************************************** > *********** > >

Two days later and msff still Pulls left when going left. Tried all suggestions in here. Viper/Nasca4 worked first time. What's wrong with GP3? Gordon.