Other than the hardware mode not running any faster, yes. No problem using
2x 12Mb Creative V2 in SLI.
Jan.
=---
Rick Schippers wrote...
> >"The 12mb card works fine" - is that everyone's experience?
>
> Hi!
>
> My 12mb voodoo2 card seems to work fine. Didn't have any problems with
> it.
GP3 hardware mode on Voodoo 2 cards
Tony Whitley posted Hasbro's reply that GP3 works on 12MB Voodoo 2 cards but not properly on 8MB ones, and users compared results. This led to a broader argument over GP3's 3D-accelerated graphics, with Joe McGinn and others saying the engine was poorly architected and Graham Triggs defending it as aimed at newer cards. Complaints about pixellated textures on GeForce 2 cards were also raised.
Automated summary.
>"The 12mb card works fine" - is that everyone's experience?
Hi!
My 12mb voodoo2 card seems to work fine. Didn't have any problems with
it.
On Tue, 8 Aug 2000 10:44:50 +0100, "Tony Whitley" <t o n y . w h i t l e y @ n S t P l A w M o r l d . c o m> wrote:
>"The 12mb card works fine" - is that everyone's experience?
I've had no problems with it on my Creative Labs 12MB V2.
--
Thief In The Night
E-Mail: [email hidden]
ICQ: 84435727
FYI: Just received a reply to my e-mail to Hasbro.
"The 12mb card works fine" - is that everyone's experience?
I thought some people had got the 8mb card to work properly. Mine works,
only with a PO of 300% - 1300%.
Tony Whitley
"Customer Number:<deleted>
Dear Tony
Thank you for your e-mail
The problems you are experiencing are down to the fact that you are using a
Voodoo 2 8mb card.
Although the min specs for GP3 require 8mb the Voodoo 2 doesn't meet this
specification. We have tested this card because of the high number of
customers that have experienced this problem and found that only 4mb of the
8mb is used for video ram the other 4mb is used by windows for texturing.
This is why updating the driver's wont help, we have contacted 3d and this
is being looked into.
The 12mb card works fine.
Regards,
Jamie Flukes
Technical Advisor / Hasbro Interactive
Tel. +44 (0)1454 893900
Fax. +44 (0)1454 894296
Email. [email hidden] <mailto:[email hidden]>
WWW. http://www.hasbro-interactive.com <http://www.hasbro-interactive.com>
----------------------------------------------------------------------------
----"
"Tony Whitley" <t o n y . w h i t l e y @ n S t P l A w M o r l d . c o m>
wrote in message news:BGQj5.9144$[email hidden]...
> I thought some people had got the 8mb card to work properly. Mine works,
> only with a PO of 300% - 1300%.
The best thing you can do is to remove as many objects as possible, and use
the 'Reduced texture detail' thing at the bottom of the advanced options...
Your problems are caused by the texture swapping (the V2 only has 4MB of
texture memory). I suspect that GP3 really wants about 5-6MB of texture
memory (which is why other 8MB cards would work - 2MB for frame / Z buffer,
6MB for textures). You need to get your texture usage down as low as
possible.
G
Graham Triggs <[email hidden]> wrote in message
news:AbTj5.9388$[email hidden]...
> "Tony Whitley" <t o n y . w h i t l e y @ n S t P l A w M o r l d . c o m>
> wrote in messagenews:BGQj5.9144$[email hidden]...
> > I thought some people had got the 8mb card to work properly. Mine works,
> > only with a PO of 300% - 1300%.
>
> The best thing you can do is to remove as many objects as possible, anduse
> the 'Reduced texture detail' thing at the bottom of the advancedoptions...
>
> Your problems are caused by the texture swapping (the V2 only has 4MB of
> texture memory). I suspect that GP3 really wants about 5-6MB of texture
> memory (which is why other 8MB cards would work - 2MB for frame / Zbuffer,
> 6MB for textures). You need to get your texture usage down as low as
> possible.Thanks, I tried all that a long time ago - no joy. Whichever textures I turn
off are replaced by xxx's (I think confirming what you say about the texture
memory) but even with them all off, minimum details, lowest resolution, I
always have at least 300+% on my Celeron 450. Software mode is OK.
Ah well the GeForce2 MX should be available in the UK soon...
Tony Whitley
"Tony Whitley" <t o n y . w h i t l e y @ n S t P l A w M o r l d . c o m>
wrote in message news:roTj5.7030$[email hidden]...
> Ah well the GeForce2 MX should be available in the UK soon...
I wouldn't bother... nVidia often has wierd problems with their drivers,
often breaking as many things as they fix with each upgrade... Also, IIRC,
the memory bandwidth is severely limited, so it's not going to be much
faster than what is out now...
If you want a fast, cheap card, you might want to hold off for the
Kyro/PowerVR S3. It looks to be about as fast as anything out at the moment
(without hardware T&L), and should come in at around �100. Compatability
might be an issue, but from the previews I've seen it looks like they've got
that pretty much sorted now. Check out www.paraknowya.de...
G
See my post earlier on my GP3 settings for my V2-SLI running smooth.
Marc
Tony Whitley <t o n y . w h i t l e y @ n S t P l A w M o r l d . c o m>
wrote in message news:roTj5.7030$[email hidden]...
>
> Graham Triggs <[email hidden]> wrote in message
> news:AbTj5.9388$[email hidden]...
> > "Tony Whitley" <t o n y . w h i t l e y @ n S t P l A w M o r l d . c om>
> > wrote in message
> news:BGQj5.9144$[email hidden]...
> > > I thought some people had got the 8mb card to work properly. Mineworks,
turn
> off are replaced by xxx's (I think confirming what you say about thetexture
Quoted text (14 lines)
> > > only with a PO of 300% - 1300%. > > > > The best thing you can do is to remove as many objects as possible, and > use > > the 'Reduced texture detail' thing at the bottom of the advanced > options... > > > > Your problems are caused by the texture swapping (the V2 only has 4MB of > > texture memory). I suspect that GP3 really wants about 5-6MB of texture > > memory (which is why other 8MB cards would work - 2MB for frame / Z > buffer, > > 6MB for textures). You need to get your texture usage down as low as > > possible. > Thanks, I tried all that a long time ago - no joy. Whichever textures IQuoted text (8 lines)
> memory) but even with them all off, minimum details, lowest resolution, I > always have at least 300+% on my Celeron 450. Software mode is OK. > > Ah well the GeForce2 MX should be available in the UK soon... > > Tony Whitley > >Same here. Asked Hasbro about it, no reply yet.
Marc
Jan Verschueren <[email hidden]> wrote in message
news:[email hidden]...
Quoted text (14 lines)
> Other than the hardware mode not running any faster, yes. No problem using > 2x 12Mb Creative V2 in SLI. > > Jan. > =--- > Rick Schippers wrote... > > >"The 12mb card works fine" - is that everyone's experience? > > > > Hi! > > > > My 12mb voodoo2 card seems to work fine. Didn't have any problems with > > it. > >In article <f98k5.8600$[email hidden]>,
Graham Triggs <[email hidden]> wrote:
Nowhere did you see me complain about the graphics being old, what I did
say is that I am not going to spend $50 on GP3 just to be stuck running it
in Software mode with it's tremendous CPU occupancy at the first corner the
same way that GP2 does. I was looking forward to GP3 as GP2 + 3D +
weather...
If I want to play in Software Mode I already have GP2.
And most games have multiple sizes and options of textures to be able to run
on different RAM sized 3D cards, decent programmers can code this in the
graphics engine so that they can sell their game to as large an
installed user base of 3D card as possible... this is how real
programmers make money, if GP3 can't do this then Hasbro should not
claim that it runs on V2 cards. And they shouldn't be surprised that
people like me are complaining.
Note that *WE* were not the ones that advertised GP3 to have Voodoo2
support, Hasbro was the one who claimed that it ran on V2 cards and they
never even mentioned that it had to be 12Meg V2 cards...
Again GP3 is the first game ever in the last few years that won't run on
a V2 8meg card, what a joke...
--John
--
Quoted text (18 lines)
>"Joe62" <[email hidden]> wrote in message >news:[email hidden]... >> Really, it isn't. EVERY properly programmed 3D game works perfectly >> well on V2 cards. > >Yes it IS ironic. > >Complaining that the graphics are 'old'? If you want 'advanced' graphics, >then you need to use more textures... Most cheap cards now come with 16MB of >'unified' memory - and you don't have to step up much to get 32MB of memory. >On a 16MB card, you get up to 14MB texture memory - and so, whilst you want >'advanced' graphics, you still want designers to be limited by having to >cope with cards that have only 4MB of texture memory - less than a third of >relatively low-end cards nowadays... > >Give me a break. > >GIn article <BGQj5.9144$[email hidden]>,
Tony Whitley <t o n y . w h i t l e y @ n S t P l A w M o r l d . c o m> wrote:
Thanks for that verification from the horse's mouth Tony...
No V2 support for my 8meg V2 means no sale on GP3 when it hits North
America...
What a joke!!!!
I was/am a HUGE GP2 fan, and planning to purchase GP3 just as an update to
GP2, but if Hasbro expects to take a 4 year old game like GP2, just add
weather effects and kludged in 3D graphics that doesn't even support
such a widely used 3D card like the Voodoo2, and expect us to purchase
it for $50 and run it in software mode???
Give me a break!
NO SALE! and I don't blame the people who pirated this piece of crap...
This is the first game ever that hasn't worked on the V2, and yes I see
a Geforce card in my future, but that doesn't excuse the lousy
coding/beta testing by Hasbro that would allow them to release with no
V2 support.
--John
A very disappointed GP2 fan who won't be buying GP3
--
Quoted text (13 lines)
> >The problems you are experiencing are down to the fact that you are using a >Voodoo 2 8mb card. > >Although the min specs for GP3 require 8mb the Voodoo 2 doesn't meet this >specification. We have tested this card because of the high number of >customers that have experienced this problem and found that only 4mb of the >8mb is used for video ram the other 4mb is used by windows for texturing. > >This is why updating the driver's wont help, we have contacted 3d and this >is being looked into. > >The 12mb card works fine.Does anyone else see the irony in this post? Complaining that the game is
"just as an update" and then whining that it won't run on your "old"
card(really, the v2 is quite dated). I guess maybe it's not quite as
"kludged" as you think? And for your information the game does run on the
V2, just not well, but fire up any modern game that swaps allot of textures
on a V2(especially an 8MB card), and I think you'll be less than impressed
with the performance...
Greg
Quoted text (26 lines)
> > Thanks for that verification from the horse's mouth Tony... > > No V2 support for my 8meg V2 means no sale on GP3 when it hits North > America... > > What a joke!!!! > > I was/am a HUGE GP2 fan, and planning to purchase GP3 just as an update to > GP2, but if Hasbro expects to take a 4 year old game like GP2, just add > weather effects and kludged in 3D graphics that doesn't even support > such a widely used 3D card like the Voodoo2, and expect us to purchase > it for $50 and run it in software mode??? > > Give me a break! > > NO SALE! and I don't blame the people who pirated this piece of crap... > > This is the first game ever that hasn't worked on the V2, and yes I see > a Geforce card in my future, but that doesn't excuse the lousy > coding/beta testing by Hasbro that would allow them to release with no > V2 support. > > --John > A very disappointed GP2 fan who won't be buying GP3 > --"Greg Gavelin" <[email hidden]> wrote:
>Does anyone else see the irony in this post? Complaining that the game is
>"just as an update" and then whining that it won't run on your "old"
>card(really, the v2 is quite dated).
Really, it isn't. EVERY properly programmed 3D game works perfectly
well on V2 cards.
Joe McGinn
_____________________
Radical Entertainment
"Joe62" <[email hidden]> wrote in message
news:[email hidden]...
> Really, it isn't. EVERY properly programmed 3D game works perfectly
> well on V2 cards.
Yes it IS ironic.
Complaining that the graphics are 'old'? If you want 'advanced' graphics,
then you need to use more textures... Most cheap cards now come with 16MB of
'unified' memory - and you don't have to step up much to get 32MB of memory.
On a 16MB card, you get up to 14MB texture memory - and so, whilst you want
'advanced' graphics, you still want designers to be limited by having to
cope with cards that have only 4MB of texture memory - less than a third of
relatively low-end cards nowadays...
Give me a break.
G
"Graham Triggs" <[email hidden]> wrote:
>Complaining that the graphics are 'old'? If you want 'advanced' graphics,
>then you need to use more textures...
Nonsense. Look at SBK 2000. It's the best looking racing game out
there, and works perfectly well on "old" 3D cards like the Voodoo2. It
looks better than other games - AND runs faster!
SBK was architected from the ground-up for 3D hardware technology, and
had solid programming and art direction. It has nothing to do with
overloading on textures.
GP3, OTOH, is clealy suffering from design of the graphics engine that
emphasized software-graphics support. That's probably great if you are
one of the few who plays games on a laptop. But it sucks for the other
99% of us.
Joe McGinn
_____________________
Radical Entertainment
"Joe62" <[email hidden]> wrote in message
news:[email hidden]...
> GP3, OTOH, is clealy suffering from design of the graphics engine that
> emphasized software-graphics support. That's probably great if you are
> one of the few who plays games on a laptop. But it sucks for the other
> 99% of us.
Over-emphasized software-graphics support? Because the only cards it can't
run in hardware mode on are the Voodoo 1 and 8MB Voodoo 2's?
G
On Thu, 10 Aug 2000 10:17:58 +0100, "Graham Triggs"
<[email hidden]> wrote:
>Why?
Why is it a problem that 3d acceleration doesn't accelerate the
graphics in the game? Duh, gee, I dunno, you figure it out.
>Face facts - the software engine in GP3 is exceptional...
I never said otherwise.
>...GP3 just goes to
>prove that you don't gain a lot from 3D cards when you do everything else
>very, very well...
I couldn't disagree more.
Joe62 wrote:
"Perfectly" is very relative, did you see it on a "current" 3D card?
Several current games explicitely do not support V2's already.
>
> SBK was architected from the ground-up for 3D hardware technology, and
> had solid programming and art direction. It has nothing to do with
> overloading on textures.
Sure, it won't work great on 8MB V2's but okay on 12MB V2's. Guess, what
that memory is used for.
>
> GP3, OTOH, is clealy suffering from design of the graphics engine that
> emphasized software-graphics support. That's probably great if you are
> one of the few who plays games on a laptop. But it sucks for the other
> 99% of us.
Hmm, it doesn't suck on my V5...or on V3, TNT2, etc. But I'm sure it
sucks
on e.g. a TNT card. Life's f*cking expensive, and gaming even more.
--
l8er
ronny
Your mouse has moved. Windows must be restarted for the change
to take effect. Reboot now?
|\ _,,,---,,_ I want to die like my Grandfather,
ZZZzz /,`.-'`' -. ;-;;,_ in his sleep.
|,4- ) )-,_. ,\ ( `'-' Not like the people in his car,
'---''(_/--' `-'\_) screaming their heads off!
Quoted text (9 lines)
> > "Graham Triggs" <[email hidden]> wrote: > > >Complaining that the graphics are 'old'? If you want 'advanced' graphics, > >then you need to use more textures... > > Nonsense. Look at SBK 2000. It's the best looking racing game out > there, and works perfectly well on "old" 3D cards like the Voodoo2. It > looks better than other games - AND runs faster!Not sure what version of GP3 you've been playing, but I have a P3800,
256MB PC-133 RAM and a 64MB GeForce2 GTS card...all of which makes GP3
looks like shite if FSAA is not turned on. The textures are grainy,
the cars float around and my joystick will not ever work unless they
actually deliver a patch. There is nothing exceptional about the GP3
graphics engine...it's four years old and is still a processor hog on
lower scale systems.
You can be a Geoff Crammond fan, but let's not exaggerate...
In article <nouk5.11052$[email hidden]>,
"Graham Triggs" <[email hidden]> wrote:
> "Joe62" <[email hidden]> wrote in message
> news:[email hidden]...
> > That, and because for many people the 3D acceleration doesn'tactually
> > accelerate the graphics. That's a poor architecture.
>
> Why?
>
> If it ran as well on a Voodoo 1 as it does on a GeForce 2, you would
> probably be saying it is a good architecture, right? Well, if thatwas the
> case, then you would have to do some pretty good hidden surfaceremoval to
> get rid of overdraw so that cards with low fill-rate aren't hampered.And if
> you do that, high-speed software rendering isn't that hard toachieve...
>
> Face facts - the software engine in GP3 is exceptional... GP3 justgoes to
> prove that you don't gain a lot from 3D cards when you do everythingelse
> very, very well (although you do gain - 16bit colour, higherresolutions,
> (selective ;-) filtering, lower PO)
>
> G
>
>
Sent via Deja.com http://www.deja.com/
Before you buy.
Even if it works on your 8MB V2 card i think you wouldn't be impressed with it's
graphics. I have a 12MB V2 card, the graphics in the game looks really
cartoonish. If you played Street Fighter 2 Alpha you'll know what i mean. From
the reply point of view, I actually prefer the software mode's graphics! Looks
more realistic. I don't know, maybe it's just my card, but it's definitely NOT
what I saw from the screenshots posted on the web.
Regards,
Shellfer.
#>The 12mb card works fine.
#
#Thanks for that verification from the horse's mouth Tony...
#
#No V2 support for my 8meg V2 means no sale on GP3 when it hits North
#America...
#
#What a joke!!!!
#
#I was/am a HUGE GP2 fan, and planning to purchase GP3 just as an update to
#GP2, but if Hasbro expects to take a 4 year old game like GP2, just add
#weather effects and kludged in 3D graphics that doesn't even support
#such a widely used 3D card like the Voodoo2, and expect us to purchase
#it for $50 and run it in software mode???
#
#Give me a break!
#
#NO SALE! and I don't blame the people who pirated this piece of crap...
#
#This is the first game ever that hasn't worked on the V2, and yes I see
#a Geforce card in my future, but that doesn't excuse the lousy
#coding/beta testing by Hasbro that would allow them to release with no
#V2 support.
#
#--John
#A very disappointed GP2 fan who won't be buying GP3
"Graham Triggs" <[email hidden]> wrote:
>Over-emphasized software-graphics support? Because the only cards it can't
>run in hardware mode on are the Voodoo 1 and 8MB Voodoo 2's?
That, and because for many people the 3D acceleration doesn't actually
accelerate the graphics. That's a poor architecture.
Joe McGinn
_____________________
Radical Entertainment
"Joao "John" Silva" <[email hidden]> wrote in message
news:8msp7s$73s$[email hidden]...
> Note that *WE* were not the ones that advertised GP3 to have Voodoo2
> support, Hasbro was the one who claimed that it ran on V2 cards and they
> never even mentioned that it had to be 12Meg V2 cards...
Be fair - it's not exactly ADVERTISED that GP3 runs on Voodoo 2's... The box
only says '8Mb 3D card' (although possibly is should list the V2 8Mb as an
exception - but then they aren't the first to not explicitly state what
cards they do and don't run on)...
> Again GP3 is the first game ever in the last few years that won't run on
> a V2 8meg card, what a joke...
Oh dear, what a shame... how old is the Voodoo 2? How long do we have to put
up with games being 'limited' in an attempt to support this card? Sooner or
later game designers have to forget about attempting to support old
hardware... and something had to be first. Get over it.
G
"Joe62" <[email hidden]> wrote in message
news:[email hidden]...
> That, and because for many people the 3D acceleration doesn't actually
> accelerate the graphics. That's a poor architecture.
Why?
If it ran as well on a Voodoo 1 as it does on a GeForce 2, you would
probably be saying it is a good architecture, right? Well, if that was the
case, then you would have to do some pretty good hidden surface removal to
get rid of overdraw so that cards with low fill-rate aren't hampered. And if
you do that, high-speed software rendering isn't that hard to achieve...
Face facts - the software engine in GP3 is exceptional... GP3 just goes to
prove that you don't gain a lot from 3D cards when you do everything else
very, very well (although you do gain - 16bit colour, higher resolutions,
(selective ;-) filtering, lower PO)
G
Hmmm.....I just received GP3 today and I run it on my ATI Rage Fury
Maxx card....However, I still have my Creative Labs 3d Blaster (12mb
Voodoo2) card in stalled and GP3 runs on it. (Nowhere near as good as the
ATI card, nevertheless, it runs) . So I wonder if this is because my card
(Voodoo 2) is Creative Labs?
Regular Racer <[email hidden]> wrote in message
news:I2yk5.222$[email hidden]...
> Hmmm.....I just received GP3 today and I run it on my ATI Rage Fury
> Maxx card....However, I still have my Creative Labs 3d Blaster (12mb
> Voodoo2) card in stalled and GP3 runs on it. (Nowhere near as good as the
> ATI card, nevertheless, it runs) . So I wonder if this is because my card
> (Voodoo 2) is Creative Labs?No, it's because you have a 12mB card. It seems to be OK (just) on that.
Tony Whitley
Quoted text (8 lines)
>> GP3, OTOH, is clealy suffering from design of the graphics engine that >> emphasized software-graphics support. That's probably great if you are >> one of the few who plays games on a laptop. But it sucks for the other >> 99% of us. > >Hmm, it doesn't suck on my V5...or on V3, TNT2, etc. But I'm sure it >sucks >on e.g. a TNT card. Life's f*cking expensive, and gaming even more."Hugh Jass" <[email hidden]> wrote in message
news:18Fk5.2875$[email hidden]...
> Gotta differ w/ya on that. GeForce2 GTS, 32MB DDR, P3 500, what the *&^%'s
> with the pixellation (tyres, for starters) and the squared-bits on the
> shadows and trees?
Oh dear - there is a small amount of pixellation on tyres when stationary (I
don't see any whilst they're moving, do you?). Guess what - this is a RACING
simulation, not a PARKING simulation. Why should it matter that stationary
tyres and barriers are pixellated when up-close? You are supposed to be
speeding round the track, not parked up at the side of it.
G
[email hidden] (Graham Triggs) wrote in
<HUMk5.529$[email hidden]>:
There's no pixellation in GPL (including stationary tyres), none in F1RS,
MGPRS2, and Unreal. So why GP3? Seeing square shadows from trees while
speeding round the track is one of those annoying little things that really
detracts- and it's on the rumble strips too. And that is really odd,
considering that there's none w/billboards, armco, etc. Maybe there's some
half-baked code in the graphics?
Let me add though that the software engine FLIES...at least on a P3...
Anyway, all of those other games are at least two years old. I understand
your point but it sure doesn't justify it.
Quoted text (12 lines)
>"Hugh Jass" <[email hidden]> wrote in message >news:18Fk5.2875$[email hidden]... >> Gotta differ w/ya on that. GeForce2 GTS, 32MB DDR, P3 500, what the >> *&^%'s with the pixellation (tyres, for starters) and the squared-bits >> on the shadows and trees? > >Oh dear - there is a small amount of pixellation on tyres when >stationary (I don't see any whilst they're moving, do you?). Guess what >- this is a RACING simulation, not a PARKING simulation. Why should it >matter that stationary tyres and barriers are pixellated when up-close? >You are supposed to be speeding round the track, not parked up at the >side of it."Hugh Jass" <[email hidden]> wrote in message
news:NcRk5.7093$[email hidden]...
> There's no pixellation in GPL (including stationary tyres), none in F1RS,
> MGPRS2, and Unreal. So why GP3?
Because everything you filter places greater load on the 3D hardware.
Considering the tyres generally aren't stationary, or that you shouldn't
really get that close to the barrier, does filtering those graphics add much
to the gameplay? Not really, but it does place greater load on the 3D
hardware. By reducing the amount of filtering, it means that it works well
on a wider range of hardware than it otherwise would...
Of course, an option to turn on FULL filtering (and even better filtering
methods) would be nice, and would appease certain people round here...
G
"Rick Schippers" <[email hidden]> wrote in message
news:[email hidden]...
> >"The 12mb card works fine" - is that everyone's experience?
>
> Hi!
>
> My 12mb voodoo2 card seems to work fine. Didn't have any problems with
> it.
I seem to be the only person with a 12MB voodoo 2 (creative) that can't get
it to work - I get about 1 FPS.
I have tried Creative's and the latest 3DFX drivers and also tried the
registry fix that's been mentioned in this NG.
Has anyone else got a Creative Voodoo 2 to work and if so what drivers are
you using and is the registry fix needed.
Looks like I'm stuck with software mode for the moment.
Thanks,
Ian
Youe absoltly right! I ran the game on a ( meg Voodoo2) and it did look very
cartoonish...hoever with my geforce2 it looks like advertised. Almost execly
like software only better...not that its that good
Thomas
> Even if it works on your 8MB V2 card i think you wouldn't be impressedwith it's
> graphics. I have a 12MB V2 card, the graphics in the game looks really
> cartoonish. If you played Street Fighter 2 Alpha you'll know what i mean.From
> the reply point of view, I actually prefer the software mode's graphics!Looks
> more realistic. I don't know, maybe it's just my card, but it's definitelyNOT
> what I saw from the screenshots posted on the web.
>
> Regards,
> Shellfer.


































