My Logitech FF wheel is not centering properly. Its like it has moved over
to the right a bit, which is really frustrating. Is there any fixes or what
is the problem to fix it?
Why don�t you try the dxtweaker (something like that?).
Download it from wingmanteam.com If you can�t find it post
mail address and I�ll submit it. BTW I�m waiting for a new
wheel don�t even have one, but read about it in a previous
post and downloaded. It helps you resetting the device, set
a new center and fix the deadzone of any joystick. Godd luck
lito
* Sent from AltaVista http://www.altavista.com Where you can also find related Web Pages, Images, Audios, Videos, News, and Shopping. Smart is Beautiful
It feels like its the wheel tho. Nothing to do with calibration, but the
hardware itself. i can move it a bit to the left and it centers ok. but too
the right it stays there for a bit.. asif the internals have moved around to
the right or something.
Regards, Luke
lito <[email hidden]> wrote in message
news:[email hidden]...
related Web Pages, Images, Audios, Videos, News, and Shopping. Smart is
Beautiful
Quoted text (12 lines)
> Why don�t you try the dxtweaker (something like that?). > Download it from wingmanteam.com If you can�t find it post > mail address and I�ll submit it. BTW I�m waiting for a new > wheel don�t even have one, but read about it in a previous > post and downloaded. It helps you resetting the device, set > a new center and fix the deadzone of any joystick. Godd luck > > lito > > > > * Sent from AltaVista http://www.altavista.com Where you can also find
"Luke" <[email hidden]> wrote in message
news:39b07bb7$0$26540$[email hidden]...
> It feels like its the wheel tho. Nothing to do with calibration, but the
> hardware itself. i can move it a bit to the left and it centers ok. buttoo
> the right it stays there for a bit.. asif the internals have moved aroundto
> the right or something.
>
> Regards, Luke
That sounds like the pot may have come loose in its mount. If the hot-glue
holding the pot in place lets go, the pot will twist in it's mount slightly
as you turn the wheel. Pop the wheel off and remove the cover and make sure
the pots not moving on you.
Another common occurance with the LWFF is that the nut holding the wheel on
the steering shaft can work loose resulting in a tiny bit of slop in the
steering. Use a thin blade to remove the center cover and check the large
retaining nut. Do not tighten it too tight though, there is a circuit board
under the nut which you don't want to crack.
--
don
New GPL Programs for the Converted Tracks:
http://www.ianparker1.plus.com/gpl/bapom/
You have the right to remain silent. Anything you say will be
misquoted, then used against you.
On Fri, 1 Sep 2000 22:30:21 -0700, "don hodgdon"
<[email hidden]> wrote:
Don, sounds like my LWFF can use this too. But I read a couple of
posts here from peolpe who openend their LWFF and had bigtime problems
getting the cable back in the right place or something like that.
When I open the cover to tighten the nut and check the pots, will the
cable come loose or can other problems occure?
I'm not really handy when it comes to these technical things :)
Andre
Quoted text (10 lines)
>That sounds like the pot may have come loose in its mount. If the hot-glue >holding the pot in place lets go, the pot will twist in it's mount slightly >as you turn the wheel. Pop the wheel off and remove the cover and make sure >the pots not moving on you. > >Another common occurance with the LWFF is that the nut holding the wheel on >the steering shaft can work loose resulting in a tiny bit of slop in the >steering. Use a thin blade to remove the center cover and check the large >retaining nut. Do not tighten it too tight though, there is a circuit board >under the nut which you don't want to crack.Can�t help there, I�m just waiting to get my hands on one,
hope it�s next week. Luck for everybody
lito
* Sent from AltaVista http://www.altavista.com Where you can also find related Web Pages, Images, Audios, Videos, News, and Shopping. Smart is Beautiful
"Andre Warringa" <[email hidden]> wrote in message
news:[email hidden]...
Andre, The cable should not be an issue at all. I've had the covers off both
my wheels with no trouble. Although it has never happened to me, it is
possible for the cables to come off the pully if you turn the wheel spindle
while the cover is off. Jens Schumacher, the gentleman who developed the
ball bearing conversion kit, has a site which explains in detail how to
disassemble the LWFF with a minimum of grief:
http://members.xoom.com/JensSchu/LogiCorner.htm click on the Conversion
Manual. You are not going to tear the wheel down as far as he does for the
conversion, but this will give you an idea of what's inside the unit and
what to look out for.
Also, on Alison's GPL site, Steve Blankenship has a Reader Report on the
LWFF which has some valuable tips for LWFF owners:
http://www.simracing.com/~alison/gpl/controls-readers.htm
Finally, GTX_Slotcar has an interesting article on his site showing how to
use the Act-Labs shifter with the LWFF, something I may be trying soon with
one of my wheels: http://www.slottweak.com/
Good Luck,
--
don
New GPL Programs for the Converted Tracks:
http://www.ianparker1.plus.com/gpl/bapom/
You have the right to remain silent. Anything you say will be
misquoted, then used against you.
Quoted text (11 lines)
> On Fri, 1 Sep 2000 22:30:21 -0700, "don hodgdon" > <[email hidden]> wrote: > > Don, sounds like my LWFF can use this too. But I read a couple of > posts here from peolpe who openend their LWFF and had bigtime problems > getting the cable back in the right place or something like that. > When I open the cover to tighten the nut and check the pots, will the > cable come loose or can other problems occure? > I'm not really handy when it comes to these technical things :) > > AndreOn Sat, 2 Sep 2000 08:22:45 -0700, "don hodgdon"
<[email hidden]> wrote:
<snip>
>Finally, GTX_Slotcar has an interesting article on his site showing how to
>use the Act-Labs shifter with the LWFF, something I may be trying soon with
>one of my wheels: http://www.slottweak.com/
Thanks Don, I'll give it a try!
Andre
>Good Luck,
On Sat, 2 Sep 2000 08:22:45 -0700, "don hodgdon"
<[email hidden]> wrote:
>http://members.xoom.com/JensSchu/LogiCorner.htm click on the Conversion
>Manual. You are not going to tear the wheel down as far as he does for the
>conversion, but this will give you an idea of what's inside the unit and
>what to look out for.<snip>
This URL doesn't work, does anybody have the correct URL?
Andre
"Andre Warringa" <[email hidden]> wrote in message
news:[email hidden]...
> On Sat, 2 Sep 2000 08:22:45 -0700, "don hodgdon"
> <[email hidden]> wrote:
>
> >http://members.xoom.com/JensSchu/LogiCorner.htm click on the Conversion
> >Manual. You are not going to tear the wheel down as far as he does forthe
Still works fine for me...IE5
don
Quoted text (7 lines)
> >conversion, but this will give you an idea of what's inside the unit and > >what to look out for. > <snip> > > This URL doesn't work, does anybody have the correct URL? > > AndreTry the below address
On Sat, 02 Sep 2000 17:33:15 GMT, Andre Warringa <[email hidden]> wrote:
>This URL doesn't work, does anybody have the correct URL?
>
>Andre
---------------------------------------------
LWFF Ball Bearing conversion at:
http://members.xoom.com/JensSchu/
GPLRank: -2.61
Does it work? Would be the easiest way.
If not, you can cheat the electronics by soldering in some resistors (check out
my page).
No need to tear apart the cables for this job.
JensSchumi
On Fri, 01 Sep 2000 12:55:08 -0700, lito <[email hidden]>
wrote:
>Why don�t you try the dxtweaker (something like that?).<snip>
---------------------------------------------
LWFF Ball Bearing conversion at:
http://members.xoom.com/JensSchu/
GPLRank: -2.61
Out of the box or did it occur during use?
If 1, welcome to the club (check out my webpage)
If 2, the pot alignment should be affected. Could be due to scrappy plastic
parts inside the wheel.
JensSchumi
On Sat, 2 Sep 2000 00:36:34 +1000, "Luke Phillips" <[email hidden]>
wrote:
>My Logitech FF wheel is not centering properly. Its like it has moved over
>to the right a bit, which is really frustrating. Is there any fixes or what
>is the problem to fix it?
>
---------------------------------------------
LWFF Ball Bearing conversion at:
http://members.xoom.com/JensSchu/
GPLRank: -2.61
Andre,
On Sat, 02 Sep 2000 11:52:06 GMT, Andre Warringa <[email hidden]> wrote:
>Don, sounds like my LWFF can use this too. But I read a couple of
>posts here from peolpe who openend their LWFF and had bigtime problems
>getting the cable back in the right place or something like that.
thats pure fun after few times doing it.
Almost better than s..
>When I open the cover to tighten the nut and check the pots, will the
>cable come loose or can other problems occure?
no prob, you don't have to open the core unit for this.
>I'm not really handy when it comes to these technical things :)
>
>Andre
JensSchumi
---------------------------------------------
LWFF Ball Bearing conversion at:
http://members.xoom.com/JensSchu/
GPLRank: -2.61


































