Hi,
My useless piece of shit Guillemot DDR GeForce card seems to have a
problem running games in Direct3D, name that the said piece of shit
likes to randomly cause the system to reboot - no warning no nothing.
I used to have the problem with both Direct3D and OpenGL modes, but
having installed the latest 5.22 driver from Guillemot the OpenGL mode
now seems to be fine.
Unfortunately not all game of course use OpenGL so I either have to
waste my time with software mode - pointless with GP3 which I just
bought or I have to take my chances with Direct3D. Hmmm, well I'm
assuming GP3 uses Direct3D anyway when in hardware mode.
You'll have to excuse my current bad attitude as it were as I've just
spent the evening fighting with this piece of shite system rebooting
while I've been trying to set-up a car in GP3, as you can imagine
rebooting every 20 minutes or so really gets on your nerves after a
while - I could still quite happily throw the whole wanky system right
out the window.
Anyway, to get to the point....
Doe anyone have any suggestions as to how to cure the problem, the
only thing I can think of is trying the drivers directly from NVidia
but I don't want to make matters worse by stuffing this up and making
the system worse. Either that or I have an old Voodoo II card sitting
in the cupboard doing nothing - but I don't see why I should have to
TBQH.
System:
AMD 750Mhz Athlon
Microstar MB (I have also got the current AGP miniport driver)
Guillemot GeForce DDR gfx card.
Creative Labs Live 1024 snd card.
128 Ram
and the usual DVD drive modem etc.
Any help much appreciate before I do some real damage!
It might be worth trying the Detonator 3 drivers (nVidia reference drivers
6.18) from nVidia's site. At least if it still doesn't work, it'll
eliminate one possibility, since 6.18 definitely should work ok with GP3 and
pretty much everything. A reboot after 20 minutes is pretty strange. If
it only happens in D3D then it can't be a power supply/overheating problem.
Can I ask what OS you are using and if you are sure the AGP miniport driver
is definitely for that OS?
Also Detonator 3 comes with a pretty good un-installer so trying it
shouldn't cause any problems.
<[email hidden]> wrote in message
news:[email hidden]...
Quoted text (40 lines)
> Hi, > > My useless piece of shit Guillemot DDR GeForce card seems to have a > problem running games in Direct3D, name that the said piece of shit > likes to randomly cause the system to reboot - no warning no nothing. > I used to have the problem with both Direct3D and OpenGL modes, but > having installed the latest 5.22 driver from Guillemot the OpenGL mode > now seems to be fine. > > Unfortunately not all game of course use OpenGL so I either have to > waste my time with software mode - pointless with GP3 which I just > bought or I have to take my chances with Direct3D. Hmmm, well I'm > assuming GP3 uses Direct3D anyway when in hardware mode. > > You'll have to excuse my current bad attitude as it were as I've just > spent the evening fighting with this piece of shite system rebooting > while I've been trying to set-up a car in GP3, as you can imagine > rebooting every 20 minutes or so really gets on your nerves after a > while - I could still quite happily throw the whole wanky system right > out the window. > > Anyway, to get to the point.... > > Doe anyone have any suggestions as to how to cure the problem, the > only thing I can think of is trying the drivers directly from NVidia > but I don't want to make matters worse by stuffing this up and making > the system worse. Either that or I have an old Voodoo II card sitting > in the cupboard doing nothing - but I don't see why I should have to > TBQH. > > System: > > AMD 750Mhz Athlon > Microstar MB (I have also got the current AGP miniport driver) > Guillemot GeForce DDR gfx card. > Creative Labs Live 1024 snd card. > 128 Ram > and the usual DVD drive modem etc. > > Any help much appreciate before I do some real damage!In addition to Simon's advice look in your BIOS for options to run the
machine a little slower for greater stability. Turning off AGP fast write
and setting System performance to standard instead of optimal (which gives
AGP2x rather than 4x) on my Asus A7V has made the system stable while the
performance is virtually unchanged, at least in GPL and GP3.
Bart Westra
"Simon Brown" <[email hidden]> wrote in message
news:Gddv5.2223$%[email hidden]...
> It might be worth trying the Detonator 3 drivers (nVidia reference drivers
> 6.18) from nVidia's site. At least if it still doesn't work, it'll
> eliminate one possibility, since 6.18 definitely should work ok with GP3and
> pretty much everything. A reboot after 20 minutes is pretty strange. If
> it only happens in D3D then it can't be a power supply/overheatingproblem.
> Can I ask what OS you are using and if you are sure the AGP miniportdriver
Quoted text (16 lines)
> is definitely for that OS? > > Also Detonator 3 comes with a pretty good un-installer so trying it > shouldn't cause any problems. > > <[email hidden]> wrote in message > news:[email hidden]... > > Hi, > > > > My useless piece of shit Guillemot DDR GeForce card seems to have a > > problem running games in Direct3D, name that the said piece of shit > > likes to randomly cause the system to reboot - no warning no nothing. > > I used to have the problem with both Direct3D and OpenGL modes, but > > having installed the latest 5.22 driver from Guillemot the OpenGL mode > > now seems to be fine. > >...........
[email hidden] wrote:
Hi, Paul
You should try to reinstalling DirectX. Use DX7a, if possible. It seems
weird, but I have found many apparently mysterious problems that were
solved simply by doing this.
Even if it isn`t the cause, it shouldn`t hurt.
DF
Quoted text (40 lines)
> Hi, > > My useless piece of shit Guillemot DDR GeForce card seems to have a > problem running games in Direct3D, name that the said piece of shit > likes to randomly cause the system to reboot - no warning no nothing. > I used to have the problem with both Direct3D and OpenGL modes, but > having installed the latest 5.22 driver from Guillemot the OpenGL mode > now seems to be fine. > > Unfortunately not all game of course use OpenGL so I either have to > waste my time with software mode - pointless with GP3 which I just > bought or I have to take my chances with Direct3D. Hmmm, well I'm > assuming GP3 uses Direct3D anyway when in hardware mode. > > You'll have to excuse my current bad attitude as it were as I've just > spent the evening fighting with this piece of shite system rebooting > while I've been trying to set-up a car in GP3, as you can imagine > rebooting every 20 minutes or so really gets on your nerves after a > while - I could still quite happily throw the whole wanky system right > out the window. > > Anyway, to get to the point.... > > Doe anyone have any suggestions as to how to cure the problem, the > only thing I can think of is trying the drivers directly from NVidia > but I don't want to make matters worse by stuffing this up and making > the system worse. Either that or I have an old Voodoo II card sitting > in the cupboard doing nothing - but I don't see why I should have to > TBQH. > > System: > > AMD 750Mhz Athlon > Microstar MB (I have also got the current AGP miniport driver) > Guillemot GeForce DDR gfx card. > Creative Labs Live 1024 snd card. > 128 Ram > and the usual DVD drive modem etc. > > Any help much appreciate before I do some real damage!On Mon, 11 Sep 2000 22:42:46 GMT, "Simon Brown"
<[email hidden]> wrote:
>It might be worth trying the Detonator 3 drivers (nVidia reference drivers
>6.18) from nVidia's site. At least if it still doesn't work, it'll
>eliminate one possibility, since 6.18 definitely should work ok with GP3 and
>pretty much everything.
I have these installed now and although it first seemed they had cured
the problem this turns out not to be the case and the machien stil
randomly re-starts while I try and play GP3. :(
> A reboot after 20 minutes is pretty strange.
There seems to be no kind of time limit as to when the machine
suddenly re-boots, it's totally random. Sometimes the system may
restart within say 5-10 minutes, but sometime I may continue for about
half an hour. It's very depressing and annoying as it means I just
can't get into GP3 which I only bought at the weekend. So far I've
only managed to do two short races with the basica car set-up -ie.
none of my tweaks have been tried in a race. :(
>If
>it only happens in D3D then it can't be a power supply/overheating problem.
>Can I ask what OS you are using and if you are sure the AGP miniport driver
>is definitely for that OS?
As it happens I check their site this evening and found a newer
miniport driver - and yes it's for my OS (Win98). Sadly this has made
no improvements - the system still reboots randomly. :(
>Also Detonator 3 comes with a pretty good un-installer so trying it
>shouldn't cause any problems.
I've left the nVidia driver installed as they seem no worse and don't
appear to be causing any other problems so far.
On Tue, 12 Sep 2000 12:46:21 +0200, "Bart Westra"
<[email hidden]> wrote:
>In addition to Simon's advice look in your BIOS for options to run the
>machine a little slower for greater stability. Turning off AGP fast write
Unfortunately, I've not found any settings for the AGP port so I don't
know where to go in this direction. :(
+
>and setting System performance to standard instead of optimal (which gives
>AGP2x rather than 4x)
This is something I've yet to try and while I don't doubt your
suggestion I'm pretty sure it's not the answer in my case. :(
> on my Asus A7V has made the system stable while the
>performance is virtually unchanged, at least in GPL and GP3.
>
On Tue, 12 Sep 2000 18:31:15 +0100, Daniel Frois
<[email hidden]> wrote:
Hi,
>
>You should try to reinstalling DirectX. Use DX7a, if possible. It seems
>weird, but I have found many apparently mysterious problems that were
>solved simply by doing this.
Just tried this but sadly no change. :(
Have you updated any drivers for your chipset? Check Asus for any updated
drivers there too and maybe try posting in Asus newsgroup see if anyone has
seen this, also nvidia newsgroups.
--
John McCoy
[email hidden]
<[email hidden]> wrote in message
news:[email hidden]...
> On Tue, 12 Sep 2000 18:31:15 +0100, Daniel Frois
> <[email hidden]> wrote:
>
> Hi,
>
> >
> >You should try to reinstalling DirectX. Use DX7a, if possible. It seems
> >weird, but I have found many apparently mysterious problems that were
> >solved simply by doing this.
>
> Just tried this but sadly no change. :(
>
Everyone here seems to be addressing driver problems, but since you
just installed a new video card (presumably), have you tried removing
it and re-seating it, just to make sure that nothing is inadvertantly
grounding out or such? The random reboots sound VERY suspicious --
I've had D3D problems with my VIA chipset motherboard and various video
cards, but it's mainly been lockups; a complete reboot is somewhat
alarming, IMO. If you haven't already done so, I'd check hardware -- I
KNOW you said it seems to work fine in OpenGL mode, so it does seem to
be a D3D problem, but the reboot sounds suspicious.
FYI, when I had similar problems with a Voodoo Banshee card (it would
run fine in GLIDE mode but not D3D), a neat little utility called
"Powertweak" solved my problem -- you can find it at:
http://www.powertweak.com
My motherboard had a VIA chipset, and that was causing me some major
problems, but Powertweak made ALL my problems go away, PERMANENTLY.
Now my system is as solid as a rock in both GLIDE and D3D mode. I know
you don't have a VIA chipset, but it might help, so I'd recommend
downloading it and giving it a try (it's a small download -- >1 MB).
Good luck!
-- JB
In article <[email hidden]>,
[email hidden] wrote:
Sent via Deja.com http://www.deja.com/
Before you buy.
Quoted text (41 lines)
> Hi, > > My useless piece of shit Guillemot DDR GeForce card seems to have a > problem running games in Direct3D, name that the said piece of shit > likes to randomly cause the system to reboot - no warning no nothing. > I used to have the problem with both Direct3D and OpenGL modes, but > having installed the latest 5.22 driver from Guillemot the OpenGL mode > now seems to be fine. > > Unfortunately not all game of course use OpenGL so I either have to > waste my time with software mode - pointless with GP3 which I just > bought or I have to take my chances with Direct3D. Hmmm, well I'm > assuming GP3 uses Direct3D anyway when in hardware mode. > > You'll have to excuse my current bad attitude as it were as I've just > spent the evening fighting with this piece of shite system rebooting > while I've been trying to set-up a car in GP3, as you can imagine > rebooting every 20 minutes or so really gets on your nerves after a > while - I could still quite happily throw the whole wanky system right > out the window. > > Anyway, to get to the point.... > > Doe anyone have any suggestions as to how to cure the problem, the > only thing I can think of is trying the drivers directly from NVidia > but I don't want to make matters worse by stuffing this up and making > the system worse. Either that or I have an old Voodoo II card sitting > in the cupboard doing nothing - but I don't see why I should have to > TBQH. > > System: > > AMD 750Mhz Athlon > Microstar MB (I have also got the current AGP miniport driver) > Guillemot GeForce DDR gfx card. > Creative Labs Live 1024 snd card. > 128 Ram > and the usual DVD drive modem etc. > > Any help much appreciate before I do some real damage! >On Wed, 13 Sep 2000 18:48:51 -0400, "John McCoy" <[email hidden]>
wrote:
>Have you updated any drivers for your chipset? Check Asus for any updated
>drivers there too and maybe try posting in Asus newsgroup see if anyone has
>seen this, also nvidia newsgroups.
Funny you should say that I'm looking at the website for my MB's
manufacturer right now to see if I can find anything relevant to my
problem. FYI, I have a Micro-Star K7-Pro (MS-6195) MB.
Cheers for the reply though. :)
It might be something with the chipset. I am guessing it uses a VIA chipset?
Good Luck
--
John McCoy
[email hidden]
<[email hidden]> wrote in message
news:[email hidden]...
> On Wed, 13 Sep 2000 18:48:51 -0400, "John McCoy" <[email hidden]>
> wrote:
>
> >Have you updated any drivers for your chipset? Check Asus for any updated
> >drivers there too and maybe try posting in Asus newsgroup see if anyone
has
> >seen this, also nvidia newsgroups.
>
> Funny you should say that I'm looking at the website for my MB's
> manufacturer right now to see if I can find anything relevant to my
> problem. FYI, I have a Micro-Star K7-Pro (MS-6195) MB.
>
> Cheers for the reply though. :)
On Wed, 13 Sep 2000 22:49:24 -0400, "John McCoy" <[email hidden]>
wrote:
>It might be something with the chipset. I am guessing it uses a VIA chipset?
Nope. It has the AMD 751 Northbridge for system controller and AMD 756
Southbridge for periferal controller - Just so happens I have the MB
manual out and at hand! :) TBQH, I'm not to clued yp with regards to
chipsets and exactly what each is for, but I'm assuming the 751 is for
erm.... managing internal control of the machine, and the 756 for
things like the PCI slots?
I assume your thought is that a problem with either of these drivers
may be leading to problems with the AGP gfx card interacting with the
AGP slot/system? I'm going to have a dig around some more on the MB
website and AMD's to see what I can find that may help me ni this
respect.
On Thu, 14 Sep 2000 21:15:20 GMT, [email hidden] wrote:
No this is not a new video card it is the same one as supplied with
the machine from new. When I first got the machine I could simply not
get games to run at all, though I can't remember if the machine would
just reboot or the game would just crash. Basically though trying to
play Half-Life (when I got the machine) was impossible in either
OpenGL or D3D - 2 seconds and bang - no more playing.
The problems eased dramatically when I started updating drivers,
though even now I could not tell you what driver in particular had
improved the problems. Eventually updating my Guillemot gfx card
drivers to 5.22 and running Half-Life in OpenGL mode cured the reboot
here completely. Again though I think I more or less tried HL with
OpenGL at the same time so whether any problems with HL running in D3D
still exist or not is another thing. For that matter I've also not
tried HL at all since installing the nVidia 6.18 Detonator drivers at
all.
>FYI, when I had similar problems with a Voodoo Banshee card (it would
>run fine in GLIDE mode but not D3D), a neat little utility called
>"Powertweak" solved my problem -- you can find it at:
I may well do, but can you give me some idea as to what it is and
does?
Thanks for the continuing replys - still need help unfortunately. :(
Quoted text (9 lines)
>Everyone here seems to be addressing driver problems, but since you >just installed a new video card (presumably), have you tried removing >it and re-seating it, just to make sure that nothing is inadvertantly >grounding out or such? The random reboots sound VERY suspicious -- >I've had D3D problems with my VIA chipset motherboard and various video >cards, but it's mainly been lockups; a complete reboot is somewhat >alarming, IMO. If you haven't already done so, I'd check hardware -- I >KNOW you said it seems to work fine in OpenGL mode, so it does seem to >be a D3D problem, but the reboot sounds suspicious.I know someone already suggested this, but see if you can find a bios
setting to run in AGP 2x mode, instead of AGP 4x. Even try AGP 1x if it's
available since there was a problem with some early Athlon boards and
GeForce cards, and the solution was to run the AGP slower.
Again though, it's very strange that OpenGL should work and D3D not work.
You could try to nail the problem down further by trying a few different
D3D/OpenGL games to see if the effect is universal. Like Half-life for
instance, which as you said, can run in both modes.
If OpenGL is definitely OK then it could be software problems with DirectX /
the cards drivers / registry settings / windows files, and the only real way
to find out for sure is to delete and re-install Win 98. I wouldn't
recommend trying this unless you're pretty sure you know how.
That's kind of a desperate measure to take though. Try e-mailing the video
card/motherboard manufacturer and contacting the shop you bought the
PC/video card from.
Also I presume GP3 runs forever happily in software mode, as opposed to D3D?
<[email hidden]> wrote in message
news:[email hidden]...
> On Wed, 13 Sep 2000 22:49:24 -0400, "John McCoy" <[email hidden]>
> wrote:
>
> >It might be something with the chipset. I am guessing it uses a VIAchipset?
<snip>
> respect.
There may be drivers for the chipset to operate right with the OS, I have
been using a BX chipset so I am not sure of that it is just a thought.
Also how many watts is your Power supply, some people have had troube with a
PS under 300 watts.
--
John McCoy
[email hidden]
<[email hidden]> wrote in message
news:[email hidden]...
> On Wed, 13 Sep 2000 22:49:24 -0400, "John McCoy" <[email hidden]>
> wrote:
>
> >It might be something with the chipset. I am guessing it uses a VIA
chipset?
>
> Nope. It has the AMD 751 Northbridge for system controller and AMD 756
> Southbridge for periferal controller - Just so happens I have the MB
> manual out and at hand! :) TBQH, I'm not to clued yp with regards to
> chipsets and exactly what each is for, but I'm assuming the 751 is for
> erm.... managing internal control of the machine, and the 756 for
> things like the PCI slots?
>
> I assume your thought is that a problem with either of these drivers
> may be leading to problems with the AGP gfx card interacting with the
> AGP slot/system? I'm going to have a dig around some more on the MB
> website and AMD's to see what I can find that may help me ni this
> respect.


































