Re: GP3 - ATI Radeon problem.

"Regular Racer" <[email hidden]> wrote: >Did you get the Radeon patch fro ATI's site? > What patch? According to the ATI Tech site they are still looking in to it. Brgds -- Mark [email hidden] "The arrow on a moving target, the archer must be sure of his aim........" N. Peart

Hi, Just installed an ATI Radeon with 3056 drivers. When I run GP3 the bottom middle of the steering wheel flickers constantly. Does any one know how to stop this? Thanks -- Mark [email hidden] "The arrow on a moving target, the archer must be sure of his aim........" N. Peart

Try to enable Wait for vertical sync. -TMS "Mark Lepak" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (8 lines)

> Hi, > > Just installed an ATI Radeon with 3056 drivers. > > When I run GP3 the bottom middle of the steering wheel flickers > constantly. > > Does any one know how to stop this?

Is this a Vertical Resync thing? "Mark Lepak" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (19 lines)

| Hi, | | Just installed an ATI Radeon with 3056 drivers. | | When I run GP3 the bottom middle of the steering wheel flickers | constantly. | | Does any one know how to stop this? | | Thanks | | -- | Mark | | [email hidden] | | "The arrow on a moving target, | the archer must be sure of his aim........" | N. Peart

Did you get the Radeon patch fro ATI's site? "Mark Lepak" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (19 lines)

> Hi, > > Just installed an ATI Radeon with 3056 drivers. > > When I run GP3 the bottom middle of the steering wheel flickers > constantly. > > Does any one know how to stop this? > > Thanks > > -- > Mark > > [email hidden] > > "The arrow on a moving target, > the archer must be sure of his aim........" > N. Peart

This...http://support.atitech.ca/products/radeon/winme/radeon_winme_drivers. html Or this one...http://support.atitech.ca/products/radeon/win98/radeon_win98_drivers.h tml "Mark Lepak" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (19 lines)

> "Regular Racer" <[email hidden]> wrote: > > >Did you get the Radeon patch fro ATI's site? > > > > What patch? > > According to the ATI Tech site they are still looking in to it. > > Brgds > > -- > Mark > > [email hidden] > > "The arrow on a moving target, > the archer must be sure of his aim........" > N. Peart

ATI is full of crap, you do not need updated AGP drivers. the GA 6BXDS is an Intel BXChipset motherboard. It might also interest you to know, that people have had all sorts of problems getting the card to work on dual cpu motherboards, such as yours. If you are running dual processors, I would suggest disabling one of them, then install the latest drivers and see if that helps. If it does help, then try renabling the other cpu. Also if you expect people to help you, you must post your system specs. "Graffnoir" <[email hidden]> wrote in message news:[email hidden]... > Hello Giga-byte news group > > I wondered if you could help me ?. I have just purchaced an ATI Radeon > graphic card for my GA-BXDS mother board and each time i boot up itfreezes

Quoted text (55 lines)

> my system. Im using the 1Fh bios ( As far as i can see ) and the system > still hangs. Ive been trying to solve this problem for 10 days and when i > went to ATI they told me i would need to get up dated drivers for the AGP > port ?. Please could someone tell me where i can get these or point me in > the right direction. Please excuse me piggy backing off this post but its > the closest ive found to the subject in the group. Any help would be > wonderful. > > Thank you for reading this > > Graffnoir > > On The Sea Of Infinite Tranquility > Sail On > > > > Regular Racer wrote in message ... > >This...http://support.atitech.ca/products/radeon/winme/radeon_winme_drivers > . > >html > > > >Or this > >one...http://support.atitech.ca/products/radeon/win98/radeon_win98_drivers. > h > >tml > > > > > >"Mark Lepak" <[email hidden]> wrote in message > >news:[email hidden]... > >> "Regular Racer" <[email hidden]> wrote: > >> > >> >Did you get the Radeon patch fro ATI's site? > >> > > >> > >> What patch? > >> > >> According to the ATI Tech site they are still looking in to it. > >> > >> Brgds > >> > >> -- > >> Mark > >> > >> [email hidden] > >> > >> "The arrow on a moving target, > >> the archer must be sure of his aim........" > >> N. Peart > > > > > >

If you have the manual for the motherboard, I would look in there it should tell you in there how to disable the second cpu if you have a second cpu. If you do not have the manual, you can read the manual on Gigabyte's website. http://www.gigabyte.com.tw/support once there click on user manuals link and you will be taken to the section of the site where you can read the manuals. The only thing you need AGP driver updates for are VIA chipset motherboards, and for GeForce series cards including GeForce 1&2. If you are using only one cpu, then you should be having a problem at all getting the Radeon to work on your motherboard. I would also take a look getting either a 300watt or 400watt powersupply, if you haven't done so. Contrary to what ATI and other people say and claim, the Radeon uses as much power as a GeForce1 card. I know this from expierence. "Graffnoir" <[email hidden]> wrote in message news:[email hidden]...

Quoted text (36 lines)

> Hello Nightowl :) > > Ive not heard much about ATI having trouble with the dual mother board but > thank you for telling me. I dont know how to disable just one of the chips > but would like to know. Im sorry i didnt put my system spec down.......i > would not have normally forgotten. Here it is > > 3 Seagate hard drives 17.4gb and 2 20.4gb > Sound blaster live > ATI Radeon > 440 GA-BXDS bios version f1h and award version 4.51 ( Ive just downloaded > version f1n and may try that one this evening to see if it helps ) > Plexwriter 12/10/32A ( IDE ) > Ultraplex 32 SCSI ( Sorry i cant remember the code for this one ) > ISDN TA by Pace > > I hope this is the right spec requested ?. If you would need to know other > things please ask. I think i will try the bios update now and see what > happens. Thank you for your reply :) > > Graffnoir > > On The Sea Of Infinite Tranquility > Sail On > > > > nightowl wrote in message ... > >ATI is full of crap, you do not need updated AGP drivers. the GA 6BXDS is > an > >Intel BXChipset motherboard. It might also interest you to know, that > people > >have had all sorts of problems getting the card to work on dual cpu > >motherboards, such as yours. > > > >If you are running dual processors, I would suggest disabling one of

them,

Quoted text (14 lines)

> >then install the latest drivers and see if that helps. If it does help, > then > >try renabling the other cpu. > > > >Also if you expect people to help you, you must post your system specs. > >"Graffnoir" <[email hidden]> wrote in message > >news:[email hidden]... > >> Hello Giga-byte news group > >> > >> I wondered if you could help me ?. I have just purchaced an ATI Radeon > >> graphic card for my GA-BXDS mother board and each time i boot up it > >freezes > >> my system. Im using the 1Fh bios ( As far as i can see ) and the system > >> still hangs. Ive been trying to solve this problem for 10 days and when

i > >> went to ATI they told me i would need to get up dated drivers for theAGP > >> port ?. Please could someone tell me where i can get these or point mein > >> the right direction. Please excuse me piggy backing off this post butits

Quoted text (58 lines)

> >> the closest ive found to the subject in the group. Any help would be > >> wonderful. > >> > >> Thank you for reading this > >> > >> Graffnoir > >> > >> On The Sea Of Infinite Tranquility > >> Sail On > >> > >> > >> > >> Regular Racer wrote in message ... > >> > >>This...http://support.atitech.ca/products/radeon/winme/radeon_winme_driver > s > >> . > >> >html > >> > > >> >Or this > >> > >>one...http://support.atitech.ca/products/radeon/win98/radeon_win98_drivers > . > >> h > >> >tml > >> > > >> > > >> >"Mark Lepak" <[email hidden]> wrote in message > >> >news:[email hidden]... > >> >> "Regular Racer" <[email hidden]> wrote: > >> >> > >> >> >Did you get the Radeon patch fro ATI's site? > >> >> > > >> >> > >> >> What patch? > >> >> > >> >> According to the ATI Tech site they are still looking in to it. > >> >> > >> >> Brgds > >> >> > >> >> -- > >> >> Mark > >> >> > >> >> [email hidden] > >> >> > >> >> "The arrow on a moving target, > >> >> the archer must be sure of his aim........" > >> >> N. Peart > >> > > >> > > >> > >> > > > > > >

Hello Giga-byte news group I wondered if you could help me ?. I have just purchaced an ATI Radeon graphic card for my GA-BXDS mother board and each time i boot up it freezes my system. Im using the 1Fh bios ( As far as i can see ) and the system still hangs. Ive been trying to solve this problem for 10 days and when i went to ATI they told me i would need to get up dated drivers for the AGP port ?. Please could someone tell me where i can get these or point me in the right direction. Please excuse me piggy backing off this post but its the closest ive found to the subject in the group. Any help would be wonderful. Thank you for reading this Graffnoir On The Sea Of Infinite Tranquility Sail On Regular Racer wrote in message ... >This...http://support.atitech.ca/products/radeon/winme/radeon_winme_drivers. >html > >Or this >one...http://support.atitech.ca/products/radeon/win98/radeon_win98_drivers.h

Quoted text (26 lines)

>tml > > >"Mark Lepak" <[email hidden]> wrote in message >news:[email hidden]... >> "Regular Racer" <[email hidden]> wrote: >> >> >Did you get the Radeon patch fro ATI's site? >> > >> >> What patch? >> >> According to the ATI Tech site they are still looking in to it. >> >> Brgds >> >> -- >> Mark >> >> [email hidden] >> >> "The arrow on a moving target, >> the archer must be sure of his aim........" >> N. Peart > >

Hello Nightowl :) Ive not heard much about ATI having trouble with the dual mother board but thank you for telling me. I dont know how to disable just one of the chips but would like to know. Im sorry i didnt put my system spec down.......i would not have normally forgotten. Here it is 3 Seagate hard drives 17.4gb and 2 20.4gb Sound blaster live ATI Radeon 440 GA-BXDS bios version f1h and award version 4.51 ( Ive just downloaded version f1n and may try that one this evening to see if it helps ) Plexwriter 12/10/32A ( IDE ) Ultraplex 32 SCSI ( Sorry i cant remember the code for this one ) ISDN TA by Pace I hope this is the right spec requested ?. If you would need to know other things please ask. I think i will try the bios update now and see what happens. Thank you for your reply :) Graffnoir On The Sea Of Infinite Tranquility Sail On nightowl wrote in message ... >ATI is full of crap, you do not need updated AGP drivers. the GA 6BXDS isan >Intel BXChipset motherboard. It might also interest you to know, thatpeople >have had all sorts of problems getting the card to work on dual cpu >motherboards, such as yours. > >If you are running dual processors, I would suggest disabling one of them, >then install the latest drivers and see if that helps. If it does help,then

Quoted text (30 lines)

>try renabling the other cpu. > >Also if you expect people to help you, you must post your system specs. >"Graffnoir" <[email hidden]> wrote in message >news:[email hidden]... >> Hello Giga-byte news group >> >> I wondered if you could help me ?. I have just purchaced an ATI Radeon >> graphic card for my GA-BXDS mother board and each time i boot up it >freezes >> my system. Im using the 1Fh bios ( As far as i can see ) and the system >> still hangs. Ive been trying to solve this problem for 10 days and when i >> went to ATI they told me i would need to get up dated drivers for the AGP >> port ?. Please could someone tell me where i can get these or point me in >> the right direction. Please excuse me piggy backing off this post but its >> the closest ive found to the subject in the group. Any help would be >> wonderful. >> >> Thank you for reading this >> >> Graffnoir >> >> On The Sea Of Infinite Tranquility >> Sail On >> >> >> >> Regular Racer wrote in message ... >> >>This...http://support.atitech.ca/products/radeon/winme/radeon_winme_driver

s >> . >> >html >> > >> >Or this >> >>one...http://support.atitech.ca/products/radeon/win98/radeon_win98_drivers.

Quoted text (31 lines)

>> h >> >tml >> > >> > >> >"Mark Lepak" <[email hidden]> wrote in message >> >news:[email hidden]... >> >> "Regular Racer" <[email hidden]> wrote: >> >> >> >> >Did you get the Radeon patch fro ATI's site? >> >> > >> >> >> >> What patch? >> >> >> >> According to the ATI Tech site they are still looking in to it. >> >> >> >> Brgds >> >> >> >> -- >> >> Mark >> >> >> >> [email hidden] >> >> >> >> "The arrow on a moving target, >> >> the archer must be sure of his aim........" >> >> N. Peart >> > >> > >> >> > >

Hello Nightowl :) WOW....i thought i was a little low on power....Im using a 230 watt power supply so the 300 would be a better idea then. Ive been thinking about it for a while so now i think going and getting one would be a good idea. Thank you very much for your help On The Sea On Infinite Tranquility Sail On Graffnoir nightowl wrote in message ... >If you have the manual for the motherboard, I would look in there it should >tell you in there how to disable the second cpu if you have a second cpu. >If you do not have the manual, you can read the manual on Gigabyte's >website. http://www.gigabyte.com.tw/support once there click on usermanuals >link and you will be taken to the section of the site where you can readthe >manuals. >The only thing you need AGP driver updates for are VIA chipsetmotherboards, >and for GeForce series cards including GeForce 1&2. > >If you are using only one cpu, then you should be having a problem at all >getting the Radeon to work on your motherboard. I would also take a look >getting either a 300watt or 400watt powersupply, if you haven't done so. >Contrary to what ATI and other people say and claim, the Radeon uses asmuch

Quoted text (7 lines)

>power as a GeForce1 card. I know this from expierence. > >"Graffnoir" <[email hidden]> wrote in message >news:[email hidden]... >> Hello Nightowl :) >> >> Ive not heard much about ATI having trouble with the dual mother board

but >> thank you for telling me. I dont know how to disable just one of thechips

Quoted text (13 lines)

>> but would like to know. Im sorry i didnt put my system spec down.......i >> would not have normally forgotten. Here it is >> >> 3 Seagate hard drives 17.4gb and 2 20.4gb >> Sound blaster live >> ATI Radeon >> 440 GA-BXDS bios version f1h and award version 4.51 ( Ive just downloaded >> version f1n and may try that one this evening to see if it helps ) >> Plexwriter 12/10/32A ( IDE ) >> Ultraplex 32 SCSI ( Sorry i cant remember the code for this one ) >> ISDN TA by Pace >> >> I hope this is the right spec requested ?. If you would need to know

other

Quoted text (12 lines)

>> things please ask. I think i will try the bios update now and see what >> happens. Thank you for your reply :) >> >> Graffnoir >> >> On The Sea Of Infinite Tranquility >> Sail On >> >> >> >> nightowl wrote in message ... >> >ATI is full of crap, you do not need updated AGP drivers. the GA 6BXDS

is

Quoted text (21 lines)

>> an >> >Intel BXChipset motherboard. It might also interest you to know, that >> people >> >have had all sorts of problems getting the card to work on dual cpu >> >motherboards, such as yours. >> > >> >If you are running dual processors, I would suggest disabling one of >them, >> >then install the latest drivers and see if that helps. If it does help, >> then >> >try renabling the other cpu. >> > >> >Also if you expect people to help you, you must post your system specs. >> >"Graffnoir" <[email hidden]> wrote in message >> >news:[email hidden]... >> >> Hello Giga-byte news group >> >> >> >> I wondered if you could help me ?. I have just purchaced an ATI Radeon >> >> graphic card for my GA-BXDS mother board and each time i boot up it >> >freezes >> >> my system. Im using the 1Fh bios ( As far as i can see ) and the

system >> >> still hangs. Ive been trying to solve this problem for 10 days andwhen

Quoted text (23 lines)

>i >> >> went to ATI they told me i would need to get up dated drivers for the >AGP >> >> port ?. Please could someone tell me where i can get these or point me >in >> >> the right direction. Please excuse me piggy backing off this post but >its >> >> the closest ive found to the subject in the group. Any help would be >> >> wonderful. >> >> >> >> Thank you for reading this >> >> >> >> Graffnoir >> >> >> >> On The Sea Of Infinite Tranquility >> >> Sail On >> >> >> >> >> >> >> >> Regular Racer wrote in message ... >> >> >> >>>This...http://support.atitech.ca/products/radeon/winme/radeon_winme_drive

r

Quoted text (8 lines)

>> s >> >> . >> >> >html >> >> > >> >> >Or this >> >> >> >>>one...http://support.atitech.ca/products/radeon/win98/radeon_win98_driver

s

Quoted text (36 lines)

>> . >> >> h >> >> >tml >> >> > >> >> > >> >> >"Mark Lepak" <[email hidden]> wrote in message >> >> >news:[email hidden]... >> >> >> "Regular Racer" <[email hidden]> wrote: >> >> >> >> >> >> >Did you get the Radeon patch fro ATI's site? >> >> >> > >> >> >> >> >> >> What patch? >> >> >> >> >> >> According to the ATI Tech site they are still looking in to it. >> >> >> >> >> >> Brgds >> >> >> >> >> >> -- >> >> >> Mark >> >> >> >> >> >> [email hidden] >> >> >> >> >> >> "The arrow on a moving target, >> >> >> the archer must be sure of his aim........" >> >> >> N. Peart >> >> > >> >> > >> >> >> >> >> > >> > >> >> > >

Hello NightOwl :) I just worked out the amount ( Give Or Take ) of power my system uses and its about 267 watts and i only have a 230 watt power supply so ive ordered a 300 ( Its the biggest i can find in my location ) and will fit it tuesday Oh im not looking forward to doing it as its a new one on me.....way too many wires but worth the challenge :) ). Im hoping it will help out the ATI graphic card problem and even if it doesnt the extra power was needed. Graffnoir On The Sea Of Infinite Tranquility Sail On Graffnoir wrote in message <[email hidden]>... >Hello Nightowl :) > >WOW....i thought i was a little low on power....Im using a 230 watt power >supply so the 300 would be a better idea then. Ive been thinking about it >for a while so now i think going and getting one would be a good idea.Thank

Quoted text (10 lines)

>you very much for your help > >On The Sea On Infinite Tranquility >Sail On > >Graffnoir > > >nightowl wrote in message ... >>If you have the manual for the motherboard, I would look in there it

should

Quoted text (33 lines)

>>tell you in there how to disable the second cpu if you have a second cpu. >>If you do not have the manual, you can read the manual on Gigabyte's >>website. http://www.gigabyte.com.tw/support once there click on user >manuals >>link and you will be taken to the section of the site where you can read >the >>manuals. >>The only thing you need AGP driver updates for are VIA chipset >motherboards, >>and for GeForce series cards including GeForce 1&2. >> >>If you are using only one cpu, then you should be having a problem at all >>getting the Radeon to work on your motherboard. I would also take a look >>getting either a 300watt or 400watt powersupply, if you haven't done so. >>Contrary to what ATI and other people say and claim, the Radeon uses as >much >>power as a GeForce1 card. I know this from expierence. >> >>"Graffnoir" <[email hidden]> wrote in message >>news:[email hidden]... >>> Hello Nightowl :) >>> >>> Ive not heard much about ATI having trouble with the dual mother board >but >>> thank you for telling me. I dont know how to disable just one of the >chips >>> but would like to know. Im sorry i didnt put my system spec down.......i >>> would not have normally forgotten. Here it is >>> >>> 3 Seagate hard drives 17.4gb and 2 20.4gb >>> Sound blaster live >>> ATI Radeon >>> 440 GA-BXDS bios version f1h and award version 4.51 ( Ive just

downloaded

Quoted text (38 lines)

>>> version f1n and may try that one this evening to see if it helps ) >>> Plexwriter 12/10/32A ( IDE ) >>> Ultraplex 32 SCSI ( Sorry i cant remember the code for this one ) >>> ISDN TA by Pace >>> >>> I hope this is the right spec requested ?. If you would need to know >other >>> things please ask. I think i will try the bios update now and see what >>> happens. Thank you for your reply :) >>> >>> Graffnoir >>> >>> On The Sea Of Infinite Tranquility >>> Sail On >>> >>> >>> >>> nightowl wrote in message ... >>> >ATI is full of crap, you do not need updated AGP drivers. the GA 6BXDS >is >>> an >>> >Intel BXChipset motherboard. It might also interest you to know, that >>> people >>> >have had all sorts of problems getting the card to work on dual cpu >>> >motherboards, such as yours. >>> > >>> >If you are running dual processors, I would suggest disabling one of >>them, >>> >then install the latest drivers and see if that helps. If it does help, >>> then >>> >try renabling the other cpu. >>> > >>> >Also if you expect people to help you, you must post your system specs. >>> >"Graffnoir" <[email hidden]> wrote in message >>> >news:[email hidden]... >>> >> Hello Giga-byte news group >>> >> >>> >> I wondered if you could help me ?. I have just purchaced an ATI

Radeon

Quoted text (10 lines)

>>> >> graphic card for my GA-BXDS mother board and each time i boot up it >>> >freezes >>> >> my system. Im using the 1Fh bios ( As far as i can see ) and the >system >>> >> still hangs. Ive been trying to solve this problem for 10 days and >when >>i >>> >> went to ATI they told me i would need to get up dated drivers for the >>AGP >>> >> port ?. Please could someone tell me where i can get these or point

me

Quoted text (19 lines)

>>in >>> >> the right direction. Please excuse me piggy backing off this post but >>its >>> >> the closest ive found to the subject in the group. Any help would be >>> >> wonderful. >>> >> >>> >> Thank you for reading this >>> >> >>> >> Graffnoir >>> >> >>> >> On The Sea Of Infinite Tranquility >>> >> Sail On >>> >> >>> >> >>> >> >>> >> Regular Racer wrote in message ... >>> >> >>> >>>>This...http://support.atitech.ca/products/radeon/winme/radeon_winme_driv

e

Quoted text (9 lines)

>r >>> s >>> >> . >>> >> >html >>> >> > >>> >> >Or this >>> >> >>> >>>>one...http://support.atitech.ca/products/radeon/win98/radeon_win98_drive

r

Quoted text (39 lines)

>s >>> . >>> >> h >>> >> >tml >>> >> > >>> >> > >>> >> >"Mark Lepak" <[email hidden]> wrote in message >>> >> >news:[email hidden]... >>> >> >> "Regular Racer" <[email hidden]> wrote: >>> >> >> >>> >> >> >Did you get the Radeon patch fro ATI's site? >>> >> >> > >>> >> >> >>> >> >> What patch? >>> >> >> >>> >> >> According to the ATI Tech site they are still looking in to it. >>> >> >> >>> >> >> Brgds >>> >> >> >>> >> >> -- >>> >> >> Mark >>> >> >> >>> >> >> [email hidden] >>> >> >> >>> >> >> "The arrow on a moving target, >>> >> >> the archer must be sure of his aim........" >>> >> >> N. Peart >>> >> > >>> >> > >>> >> >>> >> >>> > >>> > >>> >>> >> >> > >