Raymond,
I have an almost-identical setup (I went with a 1GHz T'bird, and 2 30Gb IBM
drives on the RAID controller), and while I did have some headaches getting
things running correctly, both on Win98 and Win2K, I have no complaints now.
The KT7-RAID has been getting fabulous reviews, and I have to agree.
Happily running GPL at 1920X1440, 36FPS :)
Rick
Hello all;
I thought I would post this as assistance to all who follow this path.
Like others before, I found that this system ( Yes it really kicks GPL up a
notch ) requires a LOT of patience to get to work. Don't rush and everytime
you add something and have it working, Ghost the partition so you can
restore back to that point. Good Luck
I purchased
Abit kt7-raid motherboard
AMD Thunderbird 900
128 meg of 150 mhz memory
15 gig IBM ATA100 drive
Soundblaster Live Value
Plextor 12/10/32 CD-Rec-ReWrite
3dfx Voodoo5 5500
Some cheap 300 watt case
To use with my LWFF and of course Grand Prix Legends.
Got the Whole mess delivered and began. Many attempts to get this right
over the course of a week. This is what finally got the USB ports and the
the serial ports at one point also to stop hanging the entire machine.
Software Side
Machine started with only the Voodoo5 and drives in the case
Loaded Windows SE ( tried ME, but had ACPI on so.....)
ACPI is OFF ( run setup /p i when you start the install )
Loaded 3dfx latest 3dfx drivers.
Loaded all the included drivers from the CD with the motherboard
loaded the USB fix from Microsoft for Win SE
loaded microsoft game controller ( dummy controller as per lwff readme )
loaded LATEST drivers for LWFF
installed network card ( PCI slot #4 ) got network running
installed SBLive ( PCI slot #2 ) LATEST DRIVERS ( interesting that the
latest drivers were on my cd, or looked that way and the option to turn off
SB emulation is gone. I've not found the card hanging to IRQ5 anywhere so
it looks good.
The BOIS
I set for fail-safe defaults and found that I needed to turn off the 4x AGP
till I had loaded the 3dxf drivers ( as per others )
I also set all power saving stuff off. So far I have only turned on the 4x
AGP. I haven't tried any performance settings on the bois, but will begin
now that things look stable
Many thanks to Paul's excellent site (
http://www.apushardware.com/faqs/kt7faq/kt7faq.htm ) and everyone out there
who have posted concerning this setup.
GPL feels so good now, I can't believe it. Makes an old fart want to cry.


































