Ohh dam, I just had my sister bring me these pots from USA... Hope they will
work, or else I'll be done for car racing...
Roger Squires <[email hidden]> escreveu nas not�cias de
mensagem:kRZS5.11900$[email hidden]...
> Well I got around to installing the T2 pots from guillemot, and found outto
> my chagrin they had sent non-linear taper pedal pots (what controllerwould
> ever use non-linear pots is beyond me) so I still had to go to a partsstore
them
> away from the pedals.
>
> One of these days I'll try the separate pedal axis mod, but digging intothe
Well I got around to installing the T2 pots from guillemot, and found out to
my chagrin they had sent non-linear taper pedal pots (what controller would
ever use non-linear pots is beyond me) so I still had to go to a parts store
to buy them.
The ones you want are 250k (anything from 150k to 300k should work)
single-turn linear taper pots with a 1/4" short shaft, the shaft can be
either smooth or slightly ribbed as the gears are a friction fit on the
ends. For the two pedal pots the diameter of the pot body doesn't matter,
but the steering pot mounting is made for a specific size so take it along
to match.
I found the replacement pot shafts were slightly long and interfered with
the pedal's range of motion, so check clearance and use washers to move them
away from the pedals.
One of these days I'll try the separate pedal axis mod, but digging into the
joystick port connector looks like a big pain, so I'm in no hurry.
Also, the counter guy could smell the WD40 I'd been using to clean the old
pots, and said not to use it. He gave me a silicon-based lubricant spray
instead.
rms
[email hidden]


































