I finally went and bought GPL after racing N3 for a year. I finally got all
of the patches that I could find and DX7. I am running a Viper V550 (Nvidia
chipset) under W98 on a PII 350 system. N3 works great on this machine. I
can run at 1024x768 OK but the mirriors don't work. I think that I saw a
mention of this problem a while back, but didn't pay much attention as I was
into N3. Any one remember or know how to solve?
thx, Charlie
I am assuming your using the d3d patch for GPL, the below was taken from a
section of the readme including with the d3d beta patch. Hope this helps,
--
Don Burnette
Dburn in N3 and Legends
ICQ# 74084566
* DoubleMirrorResWidth = 1
* DoubleMirrorResHeight = 1
The mirrors look rather blurry if you are running at resolutions of
1280x1024 or higher, so these options will double the resolution of the
mirror texture. This is only worth doing if you run at 1024x 768 or greater,
or if your graphics card is fast enough.
If you experience framerate problems after doubling both the horizontal and
the vertical resolutions, try running with only the vertical resolution
doubled.
* DirectMirrorRendering = 1
Most modern 3D cards are able to render the mirror scene directly into the
mirror texture. However some cards or drivers can't do this, and need to
draw the mirror scene on the main backbuffer and then copy the image into
the mirror texture. If you have problems with mirror rendering, such as
seeing the mirror image appearing in the top left corner of the screen, try
setting this to 0.
"Charlie" <[email hidden]> wrote in message
news:8vrcau$7kc$[email hidden]...
> I finally went and bought GPL after racing N3 for a year. I finally got
all
> of the patches that I could find and DX7. I am running a Viper V550
(Nvidia
> chipset) under W98 on a PII 350 system. N3 works great on this machine.
I
> can run at 1024x768 OK but the mirriors don't work. I think that I saw a
> mention of this problem a while back, but didn't pay much attention as I
was
> into N3. Any one remember or know how to solve?
> thx, Charlie
>
>
it is very easy. There is a patch available at Papy.com that gives you a
D3D video option. This is a private effort by one of the N4 team members
to update GPL. Read the directions VERY CAREFULLY, and Run that
patch...then go into GPL, pick the D3d option , restart and you should have
nice clean mirrors with probably a better overall framerate than you had
using
opengl or software mode.
dave henrie
"Charlie" <[email hidden]> wrote in message
news:8vrcau$7kc$[email hidden]...
> I finally went and bought GPL after racing N3 for a year. I finally gotall
> of the patches that I could find and DX7. I am running a Viper V550
What Don & Dave said....
Plus, make sure it's DX7a you've got, not DX7.
--Steve Smith
Charlie <[email hidden]> wrote in message
news:8vrcau$7kc$[email hidden]...
> I finally went and bought GPL after racing N3 for a year. I finally gotall
> of the patches that I could find and DX7. I am running a Viper V550(Nvidia
> chipset) under W98 on a PII 350 system. N3 works great on this machine.I
> can run at 1024x768 OK but the mirriors don't work. I think that I saw a
> mention of this problem a while back, but didn't pay much attention as Iwas
> into N3. Any one remember or know how to solve?
> thx, Charlie
>
>
I had exactly the same problem. Plus I had done what all these other
guys are suggesting and it still did not work. It was solved by the
newest nvidia drivers, simple as that.
I am using the 6.31s and alls fine.
-----Original Message-----
From: Stephen Smith [mailto:[email hidden]]
Posted At: Sunday, November 26, 2000 6:54 PM
Posted To: simulators
Conversation: gpl mirrors and Nvidia
Subject: Re: gpl mirrors and Nvidia
What Don & Dave said....
Plus, make sure it's DX7a you've got, not DX7.
--Steve Smith
Charlie <[email hidden]> wrote in message
news:8vrcau$7kc$[email hidden]...
> I finally went and bought GPL after racing N3 for a year. I finallygot
all
> of the patches that I could find and DX7. I am running a Viper V550(Nvidia
> chipset) under W98 on a PII 350 system. N3 works great on thismachine.
I
> can run at 1024x768 OK but the mirriors don't work. I think that Isaw a
> mention of this problem a while back, but didn't pay much attention asI
was
> into N3. Any one remember or know how to solve?
> thx, Charlie
>
>


































